• Restorative Dentistry and Endodontics
• /
• 제30권6호
• /
• pp.450-460
• /
• 2005

본 연구에서는 복합레진의 중합수축시 와동의 형태, 접착층의 성숙도, 및 와동의 부피가 와동저의 접착면에 발생되는 중합수축응력에 미치는 영향을 평가하였다. 1급 와동 충전시의 응력발생을 모방하기 위해, 98개의 대구치를 $2\times2\times2$ 실험군에 무작위로 분배하고 교합면 상아질을 평탄하게 연마한 후, 복합레진 충전을 위한 몰드의 역할을 할 수 있는 구멍을 가진 iris를 올려놓고 복합레진을 bulk-filling법으로 충전하였다. 각각의 변수로서 와동 형태에 관하여는 iris 재질 (접착제를 도포한 상아질 iris: 높은 C-factor, Teflon 처리된 금속 iris: 낮은 C-factor), 접착층의 성숙도에 관하여는 2종의 접착제 (Scotchbond Multi-purpose와 Xeno III), 와동의 부피에 관하여는 iris내 구멍의 직경 (직경 1 또는 $3mm{\times}높이$) 5mm)을 달리하여 전단접착강도를 측정하였다 와동의 C-factor가 클수록, 접착층의 성숙도가 우수할수록 그리고 부피가 클수록 접착력은 유의하게 감소하였다. 복합레진이 중합될 때, 와동의 형태적 제한에 따라 레진-상아질 접착계면에 발생되는 중합수축응력은 접착이 우수할수록 복합레진의 부피가 클수록 증가되므로, C-factor를 정의할 때 와동의 형태뿐 아니라, 접착층의 성숙도와 복합레진의 부피도 함께 고려되어야 된다.

• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.1-7
• /
• 2015

PURPOSE. This study was performed to evaluate shear bond strength (SBS) between three dual-cured resin cements and silica coated zirconia, before and after thermocycling treatment. MATERIALS AND METHODS. Sixty specimens were cut in $15{\times}2.75mm$ discs using zirconia. After air blasting of $50{\mu}m$ alumina, samples were prepared by tribochemical silica coating with $Rocatec^{TM}$ plus. The specimens were divided into three groups according to the dual-cure resin cement used: (1) Calibra silane+$Calibra^{(R)}$, (2) Monobond S+$Multilink^{(R)}$ N and (3) ESPN sil+$RelyX^{TM}$ Unicem Clicker. After the resin cement was bonded to the zirconia using a Teflon mold, photopolymerization was carried out. Only 10 specimens in each group were thermocycled 6,000 times. Depending on thermocycling treatment, each group was divided into two subgroups (n=10) and SBS was measured by applying force at the speed of 1 mm/min using a universal testing machine. To find out the differences in SBS according to the types of cements and thermocycling using the SPSS, two-way ANOVA was conducted and post-hoc analysis was performed by Turkey's test. RESULTS. In non-thermal aged groups, SBS of Multilink group (M1) was higher than that of Calibra (C1) and Unicem (U1) group (P<.05). Moreover, even after thermocycling treatment, SBS of Multilink group (M2) was higher than the other groups (C2 and U2). All three cements showed lower SBS after the thermocycling than before the treatments. But Multilink and Unicem had a significant difference (P<.05). CONCLUSION. In this experiment, Multilink showed the highest SBS before and after thermocycling. Also, bond strengths of all three cements decreased after thermocycling.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.15-23
• /
• 2005

The purpose of this study was to evaluate effect of aging and thermocycling on the tensile strength of restorative composite resins. Eight commercially available light-cured restorative composites (Heliomolar: HM, Palfique Estelite: PE, Spectrum: ST, UniFil-F: UF, Z100: ZH, Clearfil AP-X: CA, P60: PS, and Palfique Toughwell: PT) were selected as experimental materials. Rectangular-shaped tensile test specimens were fabricated in a teflon mold giving 5 mm in gauge length and 2 mm in thickness. All samples were stored in distilled water at $37^{\circ}C$ for 100 days. Every 10 days, specimens were thermocycled for 1,000 cycles with 15 seconds of dwelling time in each $5^{\circ}C$ and $55^{\circ}C$ water baths. Tensile testing was carried out at a crosshead speed of 0.5 mm/min and fracture surfaces were observed with a scanning electron microscope. The results obtained were summarized as follows; 1. The strength degradation of thermocycled group was severer than that of the aged group (P<0.01). 2. The tensile strength of the CA and ST groups were significantly higher than that of other groups after thermocycling treatment (P<0.05). 3. Fracture surfaces showed that the composite resin failure developed along the matrix and the filler/resin interface region.

• Restorative Dentistry and Endodontics
• /
• 제31권5호
• /
• pp.352-358
• /
• 2006

본 연구는 코어용 이중 중합 레진의 중합도에 미치는 두께의 영향과 빛이 감소된 깊은 와동에서 자가 중합에 의한 영향을 조사하고자 하였다. Luxacore Dual과 Luxacore Self (DMG Inc, Hamburg, Germany) 두 종류의 코어용 레진 수복재를 지름 10 mm, 두께가 2, 4, 6, 8 mm 의 Teflon mold에 주입하고 자가중합 시키거나 혹은 $500 mW/cm^2$의 광도로 제조자의 지시에 따라 중합 후 $37^{\circ}C$ 증류수에 24시간동안 저장하였다. 각 시편의 윗면과 아랫면에서 Knoop's hardness를 측정하였다. 결과는 ANOVA로 통계 분석 하였고 Tukey's test로 사후 검정하였다. Luxacore Self와 Luxacore Dual을 자가중합 시킨 군의 중합도는 두께에 따른 영향을 받지 않았다. Luxacore dual을 광중합한 경우 중합은 2 mm, 4 mm와 6 (적층충전) mm군에서는 밑면의 효과적인 중합이 일어났으나 8 (적층충전) mm군, 6, 8 (단일충전) mm군은 밑면에서 불완전한 중합을 보였다 (p < 0.05). 따라서 이 실험 결과에 의하면 4 mm를 초과하는 경우 단일충전보다 적층충전이 더 좋은 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제39권1호
• /
• pp.17-23
• /
• 2014

Objectives: This study evaluated the efficacy of Endosolv-R and Xylene in softening epoxy resin based sealer after 1 to 2 min exposure. Materials and Methods: Sixty Teflon molds ($6mm{\times}1.5mm$ in inner diameter and depth) were equally divided into 3 groups of 20 each. AH 26 (Dentsply/De Trey), AH Plus (Dentsply/De Trey), Adseal (Meta-Biomed) were manipulated and placed in the molds allotted to each group and allowed to set at $37^{\circ}C$ in 100% humidity for 2 wk. Each group was further divided into 2 subgroups according to the solvents used, i.e. Xylene (Lobachemie) and Endosolv-R (Septodont). Specimens in each subgroup were exposed to respective solvents for 1 and 2 min and the corresponding Vicker's microhardness (HV) was assessed. Data was analysed by Mauchly's test and two-way analysis of variance (ANOVA) with repeated measures, and one-way ANOVA. Results: Initial hardness was significantly different among the three sealers with AH Plus having the greatest and Adseal having the least. After 2 min, Xylene softened AH Plus and Adseal sealer to 11% and 25% of their initial microhardness, respectively (p < 0.001), whereas AH 26 was least affected, maintaining 89.4% of its initial microhardness. After 2 min, Endosolv-R softened AH 26, AH Plus and Adseal to 12.7, 5.6 and 8.1% of their initial microhardness, respectively (p < 0.001). Conclusions: Endosolv-R was a significantly more effective short term softener for all the tested sealers after 2 min whereas Xylene was an effective short term softener against AH plus and Adseal but less effective against AH 26.

• 조명전기설비학회논문지
• /
• 제24권7호
• /
• pp.41-46
• /
• 2010

With the improvement of industrial society, high quality electrical energy, simplification of operation and maintenance, and ensuring reliability are being required. Also we request an urgent change from $SF_6$ gas to an environment-friendly gas insulation material. In this paper, the experiments of breakdown characteristics by pressure and gap change of $N_2/O_2$ mixture gas through a GIS (Gas Insulated Switchgear) model were described. This paper reviews basic data of the surface discharge characteristics for Teflon resin in not only pure $N_2$, $N_2:O_2$ mixture gas as being focused on environmentally-friendly insulating gas, but also $SF_6$. Also, insulation characteristics by breakdown voltage and surface discharge voltage of $N_2:O_2$ mixture gas in the experimental chamber were studied.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.93-101
• /
• 2016

This paper presents the surface discharge characteristics in Dry-Air on laminated epoxy solid dielectrics and conductive particles in order to provide the valuable information for the insulation design of eco- friendly gas insulated switchgear. To improve insulation performance, the three types of the laminated epoxy solid dielectrics were proposed, and it was revealed that their surface discharge characteristics were similar to the bakelite dielectrics of same-laminated types. From the surface discharge characteristics of dry air, it was demonstrated that the effect of conductive particles on surface discharge voltage was dominant when there are this particles at the shortest electrode gap and that the degradation of insulation performance on the conductive particles was evident in epoxy than teflon. These phenomena were interpreted in terms of particle-triggered discharge mechanism and electric field of triple junction, respectively.

• 동력기계공학회지
• /
• 제12권3호
• /
• pp.55-59
• /
• 2008

In this paper, we have investigated on collection efficiency of fine particle of glass fiber-filter bag according to the surface treatment. The solution consisted of polytetrafluoroethylene(teflon), graphite powder, silicon resin and water was used as a basic surface treatment agent. Tensile strength of glass filter-bag increased with up to 3hrs and then decreased with surface treatment time. Tensile strength and initial modulus of the glass fiber-filter bag treated by iodine after basic surface treatment for 3hrs were lower than those of basic surface treatment for 3hrs, however collection efficiency and fracture strain were higher than those of basic surface treatment for 3hrs. Glass fiber-filter bag with lower initial modulus and more strain will be extend the durable period and the one treated by iodine after basic surface treatment 3or 3hrs is expected high collection efficiency of fine particle. This method makes it possible to manufacture glass fiber-filter bag of the optimum condition.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.573-580
• /
• 2005

Model I interlaminar fracture behaviors of the carbon/epoxy composite, one of the candidate composites for a tilting train carbody, were investigate by the use of DCB(Double cantilever beam) specimens. These specimens were made of CF3327 plain woven fabric with epoxy resin, and an artificial starter delamination was fabricated by inserting Teflon film with the thickness of $12.5{\mu}m$ of $25.0{\mu}m$ at the one end of the specimen. Mode I interlaminar fracture toughness was evaluated for the specimens with the different thickness of an inserter. Also delamination propagating behaviors and interlaminar fracture surface were examined through an ooptical travelling scope and a scanning electron microscope. We found that abruptly unstable crack propagation called as stick-slip phenomena was observed. In addition, interlaminar fracture behaviors were affected on the location and the morphology of a crack tip as well as an interface region.

• Tribology and Lubricants
• /
• 제32권6호
• /
• pp.201-206
• /
• 2016

In this study, we attempt to produce a semi-elliptical riblet with a shark skin-like surface using wire electrical discharge machining (WEDM) and micro molding techniques. Our design for the production of the semi-elliptical mold includes an electrode, a winding roller, and a guide on the WEDM system. A replication mold with negative riblets is machined using WEDM, and a shark skin inspired surface with positive riblets is fabricated using a micro molding technique. For a comparison with the original shark skin, a shark skin replica is also produced using the micro molding technique directly from a shark skin template. Droplet contact angles on a flat surface, the shark skin replica, and the epoxy resin-based micro riblet shark skin-like surface are evaluated. The effect of a Teflon coating on the contact angles for the three different surfaces is also investigated. The results show the micro riblet with a shark skin-like surface has a similar contact angle as the shark skin replica, which means that the simplified riblet shark skin surface strongly influences the performance of wettability. This study confirms the effectiveness of using the WEDM method to prepare hydrophobic surfaces with diverse surface patterns.