• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1993.10a
• /
• pp.58-62
• /
• 1993

This paper shows the discharge characteristics of liquid nitrogen under plane to plane electrode, needle to plance electrode, inserting teflon insulator in plane to plane electrode at atmospheric pressure. The main experimental device of this paper is cryostat. The important results obtained from this study are sa follows. Breakdown voltage of LN2 under N-P electrode is higher than that of under P-P electrode at atmospheric pressure. Breakdown duration time is longer with increase of electode gap under the P-P, N-P electrodes. The formation of bubbles by evaporation is observed in spite of non-applying source at atmospheric pressure and the creation of corona confirmed. Breakdown voltage and breakdown duration time are in proportion to increase of diameter in case of inserting teflon insulator. Partial discharge characteristics of thickness 0.5[mm] is that 채굼 voltage of teflon insulator rose with increase of diameter in each [pps].

• Bulletin of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.805-808
• /
• 2011

We have determined the urea concentration in an aqueous solution using Raman spectroscopy by incorporating a Teflon tube as an effective intensity correction standard as well as sample container. A non-overlapping Teflon band was used as the reference peak to correct Raman intensity variations that occasionally resulted from changes in laser power. To increase the sensitivity, we positioned a copper reflector inside the Teflon tube to maximize the collection of Raman scattering. The obtained accuracy using Raman spectroscopy was 0.53 mM, close to the range of accuracy of previous NIR studies (0.15-0.52 mM).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.773-777
• /
• 1998

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1 ~ 2[㎓] and temperature range of 25~ 85[>$^{\circ}C$]. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals through these lines. The loss factor of glass-epoxy and teflon could by calculated with the measured dielectric constant and the attenuation. From the experiment, the glass-epoxy was more influenced by temperature and frequency than teflon. The average dielectric constants of glass-epoxy and teflon within the measured frequency range are 4.48 and 2.18, respectively.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.224-229
• /
• 1996

Performance characteristics of single cell in phosphoric acid fuel cell were studied for various electrode fabrication parameters such as teflon content, electrode structure, thickness of electrocatalyst layer, platinum content and electrode area. The performance of single cell was decided from the measured voltage-current through a load change. The electrode of 40wt.% teflon exhibited high initial performance of single cell, but in the long term operation, the cell performance of 45 wt.% teflon was better. Also the single cell appeared good performance in case of electrodes with duplicate structure, thin electrocatalyst in thickness, more platinum content, and small area. These results of cell performance were discussed as related to the electrolyte flooding, formation of 3 phase boundary area, internal resistance of electrode, and microstructure of electrode.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.1
• /
• pp.21-27
• /
• 1984

Both of the isother mally and thermally stimulated surface potential decay characteristics(SPDC) have been investigated not only in corona charged polysulfone(PSF) which is one of heat resistant polymer, but also in corona charged polyethyleneterephthalate(PET) and polyfluoroethylene propylene(Teflon FEP) under the same experimental condition. PSF and PET shows similar SPDC in the high teperature region. Also the effect of polarity on SPDC observed from PSF and Teflon FEP shows almost the same phenomenon. From these results, we suggest that the mechanism on SPDC of PSF could be explained as the bulk conductivity from the characteristic analysis concerning PET and electron affivity from characteristic analysis concerning Teflon FEP.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.539-540
• /
• 2006

In this paper, We examine that characteristics of formative electret with polymer film and electric charge storage using grid corona discharge. compound polymer of fluorine resin used for material in electret because of high electric charge accumulation, excellent electrical and physical characteristic. All experiments were carried out with circular samples of $Teflon^(R)FEP$ film, 12.5[${\mu}m$] thick. As experiment variables, we used voltage, electrode thickness, discharge electrode gap, and discharge time. According to this variables, we studied on characteristics of formative electret and electric charge storage. Additionally we make a comparative study of the result between the grid corona discharge and needle electrode discharge.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.457-459
• /
• 2003

A new hairpin type bandpass fille. (BPF) with novel type of resonators on Teflon substrate is designed, measured, and compared with its simulation results. The proposed filter seems to have advantages of low cost and low loss, thus being very useful for 12 GHz RF applications.

• Journal of Chest Surgery
• /
• v.15 no.3
• /
• pp.311-315
• /
• 1982

Between 1973 and 1981 a total of 38 patients with a adult Patent Ductus Arteriosus, resulting from a congenital heart disease. There were 10 males and 28 females and most were in their twenties. In 21 cases, typical Patent Ductus Arteriosus without pulmonary hypertension and in 17, atypical Patent Ductus Arteriosus with pulmonary hypertension were noted. Methods of surgical treatment were division, double ligation, triple ligation, or wrapping with Teflon felt and ligation. The number of patients for each surgical treatment were 23 cases with double ligation, 4 cases with triple ligation, 3 cases of wrapping with Teflon felt and ligation and 8 cases with division. Surgical mortality occurred in one case[2.6%].

• Proceedings of the KSLP Conference
• /
• 1993.12a
• /
• pp.18-18
• /
• 1993

성문폐쇄부전의 개선을 위해 후두내에 주입하여온 여러 재료 중 현재에는 teflon만이 가장 흔히 사용되어지고 있다. 그러나 teflon은 점막하와 가동성 성대 내에 주입할 수 없어 경도 성문 폐쇄부전의 미세 조정과 성대의 작은 결손에는 부적합하다. 성문폐쇄부전을 개선하기 위하여 9명의 환자에서 17회 cross-linked collagen을 주입한 결과 이 방법은 환자의 음성을 개선하고 성문폐쇄부전을 교정하는데 성공적이었다. (중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.384-389
• /
• 1997

고분자 촉매 담체인 스티렌-디비닐벤젠의 제조시 중합반응 개시제의 함량에 따른 영향과 반응기의 재질에 따른 영향을 수소흡착실험을 통하여 확인하였다. 담체의 중합반응시 제조조건이 동일하다 할지라도 개시제의 함량에 따라서 담체의 기공 특성이 달라지므로 개시제의 함량은 모노머 양의 1%를 사용한 시료가 수소흡착능이 가장 좋은 것으로 나타났다. 반응기의 재질은 teflon으로 직접 제조한 것보다는 teflon으로 코팅 처리한 것이 더 수소흡착능이 좋은 것으로 확인되었다.