Journal of the Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회논문지)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지

A Study on Dielectric Properties of Printed Circuit Board Materials with Variation of Frequency and Temperature

온도 및 주파수 변화에 따른 프린트 배선기판의 유전특성 연구

  • Published : 1998.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the results of measured permittivity of PCB sheet material in the frequency range of 0.1 ~ 2[㎓] and temperature range of 25~ 85[>$^{\circ}C$]. Microstrip lines with different physical length are implemented to measure the attenuation and phase shift of the signals through these lines. The loss factor of glass-epoxy and teflon could by calculated with the measured dielectric constant and the attenuation. From the experiment, the glass-epoxy was more influenced by temperature and frequency than teflon. The average dielectric constants of glass-epoxy and teflon within the measured frequency range are 4.48 and 2.18, respectively.

Keywords

References

  1. HP Solution Note 4291-4, Permittivity Measurement of PC Board and HP16453A HP
  2. HP Application Note 1217-1, Basis of Measuring the Dielectric Properties of Materials HP
  3. IEEE Trans. Microwave Theory and Tech. v.35 no.7 Two Methods for the Measurement of Substrate Dielectric Constant N. K. Das;S. M. Voda;D. M. Pozar
  4. Proceedings of the 5th International Conference on Properties and Applications of Dielectric Materials v.1 Measurement of Permittivity of Printed Circuit Board Materials at RF J. H. Kim;C. Venkataseshaiah
  5. Practical Microstrip Circuit Design L. A. Trinogga;G. Kaizhou;I. C. Hunter
  6. Handbook of Microwave and Optical Components v.Ⅰ K. Chang
  7. Foundations for Microstrip Circuit Design(2nd ed.) T. C. Edwards
  8. Microwave Solid-State Circuit and Application K. Chang
  9. 誘電體現象論 日本電氣學會