• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.55-57
• /
• 2009

This research was supported by agrant (07KLSGC02) from Cutting-edge Urban Development - Korean Land Spatialization Research Project funded by Ministry of Land, Transport and Maritime Affairs.

• Molecules and Cells
• /
• 제20권3호
• /
• pp.361-363
• /
• 2005

Plasmid Achromobacter secretion (PAS) factor is a putative secretion factor that induces the secretion of periplasmic proteins. PAS factor from Vibrio vulnificus was crystallized at 294 K by the hanging drop vapor-diffusion method. It was isolated as a monomer during the purification procedures. The native crystal belongs to the F222 space group with unit cell parameters a = 56.1, b = 74.4, $c=80.0{\AA}$, ${\alpha}={\beta}={\gamma}=90^{\circ}$. The crystal was soaked in cryoprotectant containing 1 M NaBr for 1 h for MAD phasing. The diffraction limit of the Br-MAD data set was $1.9{\AA}$ using synchrotron X-ray irradiation at beam line BL-18B at the Photon Factory, Japan.

• 한국산학기술학회논문지
• /
• 제11권8호
• /
• pp.2758-2765
• /
• 2010

최근 국공립연구소 및 국립대학에서 기업으로 기술이 이전되는 현상이 점차 증가하고 있다. 본 연구는 기업 입장에서 기술이전의 주요 평가지표를 파악하고 이 평가지표의 중요도를 AHP(Analytic Hierarchy Process)를 이용하여 파악하고자 한다. 먼저, 선행연구와 전문가 면접을 통해 기술이전과 관련된 12개의 주요 항목이 추출되었으며, 요인분석을 통해 이들 12개 항목들을 기술요인, 조직요인, 환경요인, 전략요인의 4요인으로 분류하였다. AHP 분석결과, 전략요인이 가장 중요한 요인으로, 그 하위항목인 '기술분야의 성장성'이 가장 중요한 항목으로 나타났다. 본 연구는 국공립연구소 및 국립대학의 연구자들이 다른 기업으로의 기술이전을 고려한 기술개발을 모색 시, 유용하게 이용될 수 있을 것이다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2009년도 춘계학술발표회
• /
• pp.71-75
• /
• 2009

본 연구는 AHP를 이용한 항만국 통제 표적점검 평가법을 제안한다. 기존 항만국통제 TFV(Target Factor Values)는 단순한 평가법이기 때문에 보다 합리적이고 객관적인 평가법인 AHP법을 이용하였다. 그러나 AHP법은 상대평가법이기 때문에 대체안 추가시 가중치 재산정해야 한다. 따라서 이러한 해결을 위해 절대평가법을 이용하였다. 또한 최근 IMO에서 해양사고율을 항만국 통제 TFV에 포함하려고 추진중이기 때문에 해양사고 항목을 평가에 포함하였다. 마지막으로 몇척의 선박을 대상사례로 평가를 수행하였다.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.27-37
• /
• 2014

PURPOSES : The purpose of this study is to verify the causes of surface scaling at L-shoulder concrete structure. METHODS : From the literature reviews, mechanisms of frost damage were studied and material properties including strength, air void, spacing factor and scaling resistance of L-shoulder concrete structure were analyzed using core specimens taken by real fields. RESULTS : The spacing factor of air void has relatively high correlation of surface conditions : lower spacing factor at good surfacing condition and vice versa. If the compressive strength is high, even thought spacing factor does not reach the threshold value of reasonable durability, the surface scaling resistance shows higher value. Based on these test results, the compressive strength also provide positive effect on the surface scaling resistance. CONCLUSIONS : The main causes of surface scaling of L-shoulder could be summarized as unsuitable aid void amount and poor quality of air void structure. Secondly, although the compressive strength is not the governing factor of durability, but it shows the positive effect on the surface scaling resistance.

• ETRI Journal
• /
• 제33권1호
• /
• pp.110-120
• /
• 2011

As information technology rapidly develops and the period required to enter new technology shortens, there emerges a wide variety of alternatives for consumers. When there are many alternatives in the market, users choose after making comparisons. This process of making comparisons is our research key. We established a research model to find a mixed effect that comes from new attitudes to technology adoption and alternative's continuous usage intention. The effect is revealed through a relative attractiveness (RA) factor to explain a user's process of comparison. We empirically test our research model in the new media services, such as mobile TV, web TV, and mobile IPTV. According to our research results, a continuous usage intention of an existing technology is an important factor to explain the adoption of a new technology. So, the contribution of our research is in finding a role for the RA factor in research in new technology adoption.

• 한국방사선학회논문지
• /
• 제15권3호
• /
• pp.281-291
• /
• 2021

본 연구는 자기공명영상을 이용한 TOF MRA 검사에서 flow rate 2.0 ml 이하의 유속을 표현함에 있어 Compressed sensing의 사용에 따른 영상의 변화를 정량적으로 측정하고자 하였다. Auto-injector와 Flow phantom을 이용하여 각각의 혈류속도 구간을 설정하고 CS를 사용하지 않은 TOF without CS 기법과 CS를 이용한 TOF with CS 기법에서 CS factor의 변화에 따른 SNR, CNR, SSIM, RMSE 등을 측정하여 비교하였다. CS factor의 증가에 따라 나타나는 영상의 영향을 검증하고자 일원배치 분산분석(One-way ANOVA)을 시행하였다. 실험 결과 CS를 사용한 TOF MRA는 CS를 사용하지 않은 TOF MRA와 비교하여 SNR 및 CNR의 유의한 차이 없이 scan time이 현저하게 감소하였다. 반면 CS factor의 증가에 따라 SSIM 및 RMSE는 TOF without CS 영상과의 차이가 증가함을 나타내었다. 따라서 TOF MRA 검사 시 CS 기법을 통해 scan time을 효율적으로 감소시키되 적절한 CS factor의 범위를 충분히 고려해야 한다. 또한 CS factor와 영상의 유사도, 정밀성에 대한 지속적인 연구가 필요할 것으로 사료된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.703-722
• /
• 2016

Passive wireless devices have increasing civilian and military applications, especially in the scenario with wearable devices and Internet of Things. In this paper, we study indoor localization of a target equipped with radio-frequency identification (RFID) device in ultra-wideband (UWB) wireless networks. With known room layout, deterministic multipath components, including the line-of-sight (LOS) signal and the reflected signals via multipath propagation, are employed to locate the target with one transmitter and a single inaccurate receiver. A factor graph corresponding to the joint posterior position distribution of target and receiver is constructed. However, due to the mixed distribution in the factor node of likelihood function, the expressions of messages are intractable by directly applying belief propagation on factor graph. To this end, we approximate the messages by Gaussian distribution via minimizing the Kullback-Leibler divergence (KLD) between them. Accordingly, a parametric message passing algorithm for indoor passive localization is derived, in which only the means and variances of Gaussian distributions have to be updated. Performance of the proposed algorithm and the impact of critical parameters are evaluated by Monte Carlo simulations, which demonstrate the superior performance in localization accuracy and the robustness to the statistics of multipath channels.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1147-1152
• /
• 2004

Switched Reluctance Motors have an inexpensive, intrinsic simplicity and low cost that makes them well suited to home appliance and office applications. However the motor suffering with necessity of shaft position sensor, lead to non-linearity of operations. Further, the involvement of static converters deteriorates the operational power factor. Implementation of a sensorless algorithm, can remove the need of position sensors. Also, the drive includes a compact power factor control in the input stage by implementing Zero Current Switching Quasi-Resonant Boost Technology. This paper presented, aims at optimized low line current distortion, high power factor, low cost and a shaft position sensorless Switched Reluctance Motor drive.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 추계학술발표회논문집(1)
• /
• pp.242-247
• /
• 1996

Flow oscillations in boiling channels induces a drastic reduction of the (critical heat flux) CHF or premature burnout. However, most of CHF works and correlations have been focused on stable flow conditions without considering flow oscillation. Therefore to improve the understanding on flow oscillation CHF, in this paper a new CHF correction factor to predict the CHF values under flow oscillation conditions has been developed from 126 experimental data. Also to investigate the dominant factor on flow oscillation CHF parametric trends are analyzed by using the developed correction factor. The overall mean accuracy ratio of the developed correction factor is 1.033 with a standard deviation of 0.195. The RMS errors 0.198. Its assessment shows that the predictions agree well with the experimental data within 25% error bounds.