• Geomechanics and Engineering
• /
• 제22권4호
• /
• pp.277-290
• /
• 2020

This paper presents an elastic-plastic solution for the circular tunnel of elastic-strain softening behavior considering the pressure-dependent Young's modulus and the nonlinear dilatancy. The proposed solution is verified by the results of the field measuring and numerical simulation from a practical project, and a published closed-form analysis solution. The influence of each factor is discussed in detail, and the ability of Young's modulus and dilatancy characterizing the mechanical response of surrounding rock is investigated. It is found that, in low levels of support pressure, adopting the constant Young's modulus model will seriously misestimate the surrounding rock deformation. Using the constant dilatancy model will underestimate the surrounding rock deformation. When adopting the constant dilatancy model, as the dilation angle increases, the range of the plastic region increases, and the surrounding rock deformation weakens. When adopting the nonlinear dilatancy, the plastic region range and the surrounding rock deformation are the largest. The surrounding rock deformation using pressure-dependent Young's modulus model is between those resulted from two constant Young's modulus models. The constant α of pressuredependent Young's modulus model is the main factor affecting the tunnel displacement. The influence of α using a constant dilatancy model is much more apparent than that using a nonlinear dilatancy model.

• 무역상무연구
• /
• 제25권
• /
• pp.211-241
• /
• 2005

Innovation resistance toward technology products such as e-Marketplace is an important concept in business to business marketing. But most of researches and literatures have not been focused on innovation resistance. Therefore, the objective of this paper is to confirm key factors that effects on the innovation resistance. Additionally this study will be revealed the factors affecting the innovation resistance to information technology of trade according to adopting stage. Based on the past literatures, the innovation resistance of users can be viewed as dependent on two sets of factors came from the study of Innovation Resistance Model(Ram, 1987):perceived innovation(e-Marketplace) characteristics and user(trading company) characteristics. Perceived innovation characteristics consists of relative advantage, compatibility, perceived risk, complexity, inhibitory effect on the adoption of profitable innovation. The user characteristics consist of innovativeness, beliefs and attitude toward existing trade method. And user adoption stage came from the study of Innovation Diffusion(Roger, 1995). To make it simple, this study divides group1(knowledge/persuasion/decision) and group2(implementation/confirmation). In the result of the empirical study, the hypothesis 1, hypothesis 2, hypothesis 4 were supported partially and hypothesis 3 was completely supported.

• ETRI Journal
• /
• 제27권4호
• /
• pp.439-445
• /
• 2005

We introduce a strained-SiGe technology adopting different thicknesses of Si cap layers towards low power and high performance CMOS applications. By simply adopting 3 and 7 nm thick Si-cap layers in n-channel and p-channel MOSFETs, respectively, the transconductances and driving currents of both devices were enhanced by 7 to 37% and 6 to 72%. These improvements seemed responsible for the formation of a lightly doped retrograde high-electron-mobility Si surface channel in nMOSFETs and a compressively strained high-hole-mobility $Si_{0.8}Ge_{0.2}$ buried channel in pMOSFETs. In addition, the nMOSFET exhibited greatly reduced subthreshold swing values (that is, reduced standby power consumption), and the pMOSFET revealed greatly suppressed 1/f noise and gate-leakage levels. Unlike the conventional strained-Si CMOS employing a relatively thick (typically > 2 ${\mu}m$) $Si_xGe_{1-x}$ relaxed buffer layer, the strained-SiGe CMOS with a very thin (20 nm) $Si_{0.8}Ge_{0.2}$ layer in this study showed a negligible self-heating problem. Consequently, the proposed strained-SiGe CMOS design structure should be a good candidate for low power and high performance digital/analog applications.

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.45-53
• /
• 2024

A Smart factories are systems that enable quick response to customer demands, reduce defect rates, and maximize productivity. They have evolved from manual labor-intensive processes to automation and now to cyber-physical systems with the help of information and communication technology. However, many small and medium-sized enterprises (SMEs) are still unable to implement even the initial stages of smart factories due to various environmental and economic constraints. Additionally, there is a lack of awareness and understanding of the concept of smart factories. To address this issue, the Cooperation-based Smart Factory Construction Support Project was launched. This project is a differentiated support project that provides customized programs based on the size and level of the company. Research has been conducted to analyze the impact of this project on participating and non-participating companies. The study aims to determine the effectiveness of the support policy and suggest efficient measures for improvement. Furthermore, the research aims to provide direction for future support projects to enhance the manufacturing competitiveness of SMEs. Ultimately, the goal is to improve the overall manufacturing industry and drive innovation.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.59-68
• /
• 2017

This paper aims at finding some lessons applicable to successful implementation of 'The 3D Printing R/D Project' through both examining the process of adopting overseas industrialized housing production technological knowhow by home builders during the 1970's~1980's period and thereafter until now the various efforts to adjust the technologies efficiently to the Korea's unique situation. Some meaningful lessons can be summarized as follows; I) Deep understanding of 3DP technological know-why along with its inheritance, II) Readjusting of R/D period and goals(cf. Global leader Winsun's 15 years experiment), III) Restructuring for more collaborative R/D B&E system among participating researchers IV) Fostering 3DP expert-engineers and technicians from the early stage, V) Clearing legal barriers in users' adopting 3DP methods necessary, VI) Development of appropriate building material besides concrete. Therefore, it is highly recommended that the above-mentioned 6 lessons positively accepted and applied to the Research Implementation Plan in due course, especially by KICT consortium and KAIA under the guidance of Ministry of Land, Infrastructure and Transport.

• 한국산학기술학회논문지
• /
• 제15권12호
• /
• pp.7430-7437
• /
• 2014

복잡해지고 대형화되고 있는 국내 외 건설 프로젝트의 변화에 따라 건축 토목 분야 설계 패러다임이 점차 2차원 설계에서 3차원 설계로 이동하고 있다. 건축 분야에서는 발주자의 적극적인 요구에 따라 건설 정보의 효율적 관리를 위하여 Building Information Modeling(BIM) 기술을 활용하고자 많은 연구와 노력이 이루어지고 있다. 그러나 토목 분야에서는 발주자 관점에서의 BIM 기술 적용 사례가 건축 분야에 비해 상대적으로 부족한 실정이며, 대부분의 프로젝트의 발주자가 국가나 공공기관인 토목 분야의 특성상 BIM과 관련된 제도나 기술에 대한 인식 미비로 기술 도입에 소극적인 것이 현실이다. 하지만 최근 토목 분야에서도 BIM 기술의 활용가능성에 주목하여 조달청 및 국토교통부와 같은 정부기관과 공사 공단과 같은 기관에서 관련 제도 정비 및 기술 도입에 적극적으로 노력하고 있다. 이에 본 연구에서는 이러한 정책 및 제도 변화에 발맞추어 나아가기 위하여 대표적인 토목공사 발주 공공기관의 BIM대응 전략에 대하여 살펴보고, 각 기관별로 실제 BIM 적용 사례 분석을 통해 토목분야에서의 BIM 기술에 대한 대응 및 발전 전략에 대하여 도출하였다.

• International Journal of Quality Innovation
• /
• 제9권3호
• /
• pp.93-112
• /
• 2008

This study explores the influence of Taiwan's high-tech manufacturers' innovative strategy and innovation motivation concerning the implementation of innovative activities, as well as the influence of innovative activities implementation on business performance. The two intermediate variables, industry group and enterprise scale are also considered. Through a review of the relevant literature, a theoretical model of the influence relationship is developed, while an empirical analysis is simultaneously conducted on Taiwan's high-tech manufacturers. The research result shows that the internal driving force of innovative activities has a significant impact on the level of implementing technological innovative activities and cultural innovative activities. The external driving force of innovative activities has a significant impact on the level of implementing market innovative activities and management innovative activities. Companies adopting self-developed technology and purchased as well as self-developed technology strategies, perform better than those adopting purchased new technology or those with neither purchased nor self-developed technology strategies, at implementing technological innovative activities and cultural innovative activities. The level of implementing innovative activities has a significant influence on business performance (cost reduction and product/service differentiation). For the intermediate variables of "industry group" and "enterprise scale", it is proven in this study that they have no significant influence on the level of innovative activity implementation or business performance.

• International Journal of Computer Science & Network Security
• /
• 제22권5호
• /
• pp.245-249
• /
• 2022

This paper explored gifted students' perspectives on using educational technologies in their schools in the Saudi context. Adopting a descriptive research approach, a questionnaire was used to collect information from a sample of 196 gifted secondary school students in Jeddah. Findings showed that educational technology was used to a high degree, with an overall mean of 3.74 and 4.06 for the degree of importance of technological usage. Based on the findings, the researcher forwards some recommendations for effectively using such technologies to promote gifted students' abilities and talents.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.4781-4803
• /
• 2017

Environmental monitoring systems using Wireless Sensor Networks (WSNs) face the challenge of high power consumption, due to the high levels of multi-hop data communication involved. In order to overcome the issue of fast energy depletion, a proof-of-concept implementation proves that adopting a clustering algorithm in environmental monitoring applications will significantly reduce the total power consumption for environment sensor nodes. In this paper, an energy-efficient WSN-based environmental monitoring system is proposed and implemented, using eight sensor nodes deployed over an area of $1km^2$, which took place in the city of Tabuk in Saudi Arabia. The effectiveness of the proposed environmental monitoring system has been demonstrated through adopting a number of real experimental studies.

• 경영과학
• /
• 제27권3호
• /
• pp.137-147
• /
• 2010

Real-time supply chain environments based on RFID will be an important topic in future society; Nevertheless, adopting RFID in real industry SCM is still in its infancy. The aim of this paper is to develop the physical framework of a fully adopting RFID system from manufacturing to recycle phase and measure the effect. So, we built a simulation station with fully appling RFID and analyzed benefits with mathematic model. Then, specifying the advantages and improvement scheme for real industry limitations were suggested. This work concluded that fully appling RFID in SCM gives improvement of quality and service to both production and consumer.