• Journal of Electrical Engineering and Technology
• /
• 제11권2호
• /
• pp.405-415
• /
• 2016

This paper presents a model predictive control for shunt active power filters in synchronous reference frame using space vector pulse-width modulation (SVPWM). The three phase load currents are transformed into synchronous rotating reference frame in order to reduce the order of the control system. The proposed current controller calculates reference current command for harmonic current components in synchronous frame. The fundamental load current components are transformed into dc components revealing only the harmonics. The predictive current controller will add robustness and fast compensation to generate commands to the SVPWM which minimizes switching frequency while maintaining fast harmonic compensation. By using the model predictive control, the optimal switching state to be applied to the next sampling time is selected. The filter current contains only the harmonic components, which are the reference compensating currents. In this method the supply current will be equal to the fundamental component of load current and a part of the current at fundamental frequency for losses of the inverter. Mathematical analysis and the feasibility of the suggested approach are verified through simulation results under steady state and transient conditions for non-linear load. The effectiveness of the proposed controller is confirmed through experimental validation.

• 한국통신학회논문지
• /
• 제33권6B호
• /
• pp.440-449
• /
• 2008

본 논문은 정부의 광대역통합망(BcN) 구축의 일환으로서 농어촌지역의 BcN 기반구축 사업의 타당성 분석을 목적으로 한다. 사업타당성 분석을 위하여 새로운 평가지표를 도출하고 전문가설문을 활용한 AHP 기법을 사용하여 사업타당성을 평가하였다. 그리고, 관련 선행연구를 살펴봄으로써 적합한 평가지표를 도출하고 계층화 분석법(AHP)을 사용하여 BcN 사업타당성을 평가하도록 한다. 그 결과 주요 타당성 지표로서 경제적 타당성, 기술적 타당성, 정책적 타당성 등이 BcN 사업타당성 지표로 도출되었으며, 평가기준으로 이해되었다. 연구결과 사업시행은 타당한 것으로 나타났으며, 분석의 신뢰도를 나타내는 비일관성지수는 0.0566으로 낮게 나타났다. 그리고, 향후 BcN 구축사업이 국민의 생활개선 향상에 크게 기여할 것으로 기대된다. 또한 BcN 사업을 합리적으로 추진하기 위한 기초자료로서 가치가 있을 것이다.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.177-184
• /
• 2017

기술의 확산 현상의 추세 및 발생 동인에 대한 정확한 이해는 새로운 기술을 예측하고 기술 혁신의 과정을 이해하는데 매우 유용하다. 본 연구에서는 기술의 진화 속도가 빠른 반도체 산업 32nm, 22nm, 14nm 로직 기술의 실증적 사례에 대해 기술적 성능 향상 및 경제성 지표를 고려한 정량적 추세 분석을 적용하여 기술 확산 현상의 추세 및 발생 동인을 분석하였다. 기술적 성능 향상을 고려한 기술 확산 곡선은 S곡선의 성숙기, 쇠퇴기 형태를 보였고, 경제성 기반 기술 확산 곡선은 학습효과곡선의 형태를 보였다. 기술 확산 곡선은 2년의 수명주기를 보였고, 기술 세대별 기술적 성능향상 또는 칩 제조비용의 변화 정도가 정량적으로 관찰되었다. 또한 제품구조혁신은 경제적 발생동인보다 기술적 발생동인이 더 지배적인 영향을 미침을 확인할 수 있었다. 본 연구결과는 첨단기술기반의 반도체 산업에 대한 기술 확산 현상의 추세 및 발생 동인에 대한 실증연구로 시사점이 있으며, 기술 예측 또는 기술 전략 수립에 활용될 수 있으므로 실무적으로도 의의가 크다.

• Current Photovoltaic Research
• /
• 제11권4호
• /
• pp.124-133
• /
• 2023

In order to deploy the large-scale energy storage (ES) service in the various industry, it is very important to develop a business model with high technological and economic feasibility through detailed valuation of cost and expected benefits. In relation to this, this paper established an optimal scheduling plan for electric vehicle charging stations connected with photovoltaic (PV) and ES technologies in Korea using the distributed energy resource valuation tool and analyzed the feasibility of the project. In addition, the impact of incentives such as REC (Renewable Energy Certificate) to be given to electric vehicle charging stations in accordance with the relevant laws to be revised in the future was analyzed. As a results, the methodology presented in this paper are expected to be used in various ways to analyze the feasibility of various business models linked to renewable energy and ES technologies as well as the electric vehicle market.

• 식품보건융합연구
• /
• 제4권3호
• /
• pp.6-11
• /
• 2018

In the Republic of Belarus as well as in the world acute problem of protecting forests from diseases and pests. The damage caused by root rot is essential, therefore, the problem of forest protection is an urgent task. The biologics has the greatest prospects in according with traditional methods of struggle. Deep method of cultivation of a mushroom Phlebiopsis gigantea with use of nutrient mediums on the basis of ethanol stillage and its components (fugat) is researched. Feasibility of use stillage as raw materials in production of a biological product for the wood protection against root decay is shown. The effect of different additives (sawdust, fodder yeast) on the accumulation of reactive biological product - oidy has been studed It was determined that the deep cultivation using sawdust of the highest accumulation oidy (1.5 $10^6units/ml$). It was also found that the stillage is the best breeding ground for fungus biomass accumulation (7.9 9.8 g / l) versus fugat (6.0 6.6 g / l). On the basis of research work the technological scheme for production of a biological product were developed. Based on the conducted studies, a technological scheme was proposed for obtaining a biological preparation by deep cultivation of the fungus Phlebiopsis gigantea.

• Computers and Concrete
• /
• 제1권3호
• /
• pp.355-369
• /
• 2004

This paper presents a study of four finite element techniques that can be used to model slabon-beam highway bridges. The feasibility and correctness of each modeling technique are examined by applying them to a prestressed concrete I-beam bridge and a prestressed concrete box-beam bridge. Other issues related to bridge modeling such as torsional constant, support conditions, and quality control check are studied in detail and discussed in the paper. It is found that, under truck loading, the bending stress distribution in a beam section depends on the modeling technique being utilized. It is observed that the behavior of the bridge superstructure can be better represented when accounting for composite behavior between the supporting beams and slab.

• Asian Journal of Innovation and Policy
• /
• 제1권2호
• /
• pp.200-218
• /
• 2012

Estimating the economic life of a technology is the first important prerequisite step in the feasibility analysis of technology-based business. Many empirical studies have concentrated on patents data to estimate the time period for a technology. However, it is recommended to estimate it along with qualitative considerations of future technological and market conditions. In this regard, little is known about how approaches are applied. This paper aims to establish a structural framework of estimating the lifetime of a technology by integrating the outputs of an analysis of the determinants in each transition of a product life cycle. We describe an illustrative case about a light emitting diode (LED) backlight unit (BLU) technology for the liquid crystal display (LCD) TV. The framework allows valuators and experts to estimate a technology lifetime by using multidimensional factors.

• Journal of Power Electronics
• /
• 제9권6호
• /
• pp.854-865
• /
• 2009

Super-lift dc-dc converters are a series of advanced step-up dc-dc topologies that provide high voltage transfer gains by super-lift techniques. This paper presents a developed graphical modelling method for super-lift converters and gives a thorough analysis with a consideration of the effects caused by parasitic parameters and diodes' forward voltage drop. The general guidelines for constructing and deriving graphical models are provided for system analysis. By applying it to examples, the proposed method shows the advantages of high convenience and feasibility. Both the circuit simulation and experimental results are given to support the theoretical analysis.

• Advanced Composite Materials
• /
• 제18권2호
• /
• pp.95-103
• /
• 2009

Composites can be designed to have special properties, and even such properties that are difficult to find in nature. We propose a simple approach to realize negative expansion upon wetting, i.e., contraction upon wetting, using swelling materials. The key parameters in one-dimensional case are investigated, and the possible configurations for two and three-dimensional cases are presented. The feasibility is demonstrated through a simple test.

• 자원리싸이클링
• /
• 제24권1호
• /
• pp.43-50
• /
• 2015

본 연구에서는 국내외 자료를 광범위하게 분석하여 기저귀 재활용의 사업화 타당성을 조사하였다. 네덜란드의 Knowaste사는 사용후 기저귀에 포함되어 있는 펄프와 합성수지를 분리하여 펄프와 플라스틱, 고분자 흡수물질 (Super Absorbing Polymer: SAP)로 분리하는 재활용 기술로 사업을 하고 있다. 반면 국내에서 사업화가 진행되고 있는 기술은 사용전 기저귀 공정 스크랩중의 펄프와 합성수지, SAP 등이 혼합된 상태로 고형연료, 컨테이너 적재용 보드, 자동차 시트 등의 제품을 생산하는 재활용에 국한되어 있다. 국내의 사용후 기저귀 재활용 경제성 분석에 관한 선행 연구 결과는 서로 상반되는 결론을 내고 있지만 본 연구에서는 사용전 기저귀 폐기물은 상당한 경제적 타당성을 확보하고 있음을 알 수 있었다. 따라서, 사용전 기저귀를 포함한 폐기저귀 재활용 기술 개발과 정책적 지원을 통하여 '지속가능한 사회 구축'에 한발 더 근접할 수 있을 것이다.