• 한국전산유체공학회지
• /
• 제14권1호
• /
• pp.78-85
• /
• 2009

A combined theoretical and numerical study is conducted to design a slit nozzle for large-area liquid coating. The objectives are to guarantee the uniformity in the injected flow and to provide the capability of explicit control of flow rate. The woking fluid is a dilute aqueous solution containing single-walled carbon nanotubes and its low viscosity and the presence of dispersed materials pose technical hurdles. A theoretical analysis leads to a guideline for the geometric design of a slit nozzle. The CFD-based numerical experiment is employed as a verification tool. A new flow passage unit, connected to the nozzle chamber, is proposed to permit the control of flow rate by using the commodity pressurizer. The numerical results confirm the feasibility of this idea. The optimal geometry of internal structure of the nozzle has been searched for numerically and the related issues are discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권5호
• /
• pp.566-572
• /
• 2014

Recently, indoor navigation has been applied in large convention centers by using wireless sensor networks (WSNs), which provide not only a user's path to be traveled but also orientation and shopping information to increase user's convenience. This paper presents the localization system for estimating relative coordinates without pre-deployment of the reference node based on ultra wide band (UWB) ranging system, which is relatively suitable for indoor localization compared to other wireless communications, and azimuth sensor. The proposed localization system which consists of an azimuth sensor and a mobile node composed of three nodes estimates relative coordinates of the reference node without applying any recursive and time consumption algorithms. Also, in the process of estimating relative coordinates of the reference node, ranging errors are minimized through the proposed technique and the number of nodes can be reduced. Experimental results show the feasibility and validity of the proposed system.

• 디지털산업정보학회논문지
• /
• 제12권4호
• /
• pp.81-87
• /
• 2016

Recently, as the heterogeneous network (HetNet) has been deployed widely to support various kinds of Radio Access Networks(RANs) with a combination of Macro, Pico, and/or Femto cells, research and standardization efforts have been very active regarding the concept of Licensed Shared Access (LSA) for supporting spectrum sharing. In order for a mobile device to efficiently support the spectrum sharing, the mobile device shall be reconfigurable, meaning that its radio application code has to be adaptively changed in accordance with the hopping of desired spectral band. Especially, Working Group 2 (WG2) of Technical Committee (TC) Reconfigurable Radio System (RRS) of European Telecommunications Standards Institute (ETSI) has been a main driving force for developing standard architecture for Multi-mode Mobile Device (MD) that can be applied to the LSA system. In this paper, we introduce the Multi-mode MD architecture for supporting LSA-based spectrum sharing. An implementation of a test-bed of Multi-mode MD is presented in order to verify the feasibility of the standard MD architecture for the purpose of LSA-based spectrum sharing through various experimental tests.

• Journal of Korean Society for Atmospheric Environment
• /
• 제19권E4호
• /
• pp.157-168
• /
• 2003

This study evaluated the technical feasibility of the application of titanium oxide (TiO$_2$) photocatalysis for the removal of VOCs in low ppb concentrations commonly associated with non -occupational indoor air quality issues. A series of experiments were conducted to evaluate four parameters (relative humidity (RH), hydraulic diameter (HD), photocatalytic oxidation (PCO) reactor material (RM), and inlet port size (IPS) of PCO reactor) for the PCO destruction efficiencies of the selected target VOCs. None of the target VOCs presented significant dependency on the RH, which is inconsistent with a few previous studies. However, it is noted that the three parameters (HD, RM and IPS) should be considered for better VOCs removal efficiencies for the application of TiO$_2$ photocatalytic technology for cleansing non -occupational indoor air. The PCO destruction of VOCs at concentrations associated with non-occupational indoor air quality issues can be up to nearly 100％. The amount of CO generated during PCO would be negligible in comparison to the indoor CO levels. These results can make the PCO reactor an important tool in the effort to improve non-occupational indoor air quality.

• 터널과지하공간
• /
• 제24권1호
• /
• pp.21-31
• /
• 2014

심부 5 km 내외에 고압의 유체 주입에 의하여 인공저류층을 형성한 후 지열유체를 순환 생산하여 지열발전을 하는 인공저류층 지열시스템의 실현 가능성을 판단하기 위해 다양한 지역에서 인공저류층 지열시스템 실증연구가 진행되고 있다. 본 기술보고는 영국 Rosemanowes 에서 진행된 EGS 실증연구와 호주 Cooper Basin에서 2002년 이래 진행되고 있는 EGS 적용 사례를 소개하여 해당 지역에서 진행된 연구의 경험, 오류, 시사점 등을 정리하고, 향후 한국에서의 실증연구에 활용하고자 작성되었다.

• 터널과지하공간
• /
• 제21권6호
• /
• pp.427-438
• /
• 2011

세그먼트 라이닝은 쉴드터널에서 공사 중의 안정성을 확보하고 영구적인 터널 라이닝으로 사용되는 중요한 구조체이다. 더욱이 세그먼트 라이닝은 쉴드터널의 공사비에서 가장 큰 비중을 차지하기 때문에, 세그먼트의 경제성 향상을 위한 기술적인 개선 노력들이 이루어지고 있다. 따라서 본 연구에서는 경제적인 세그먼트 라이닝의 시공을 위한 고성능 세그먼트의 최신 개발 동향을 조사 및 분석하여 세그먼트의 기술개발 방향을 제시하고자 하였다. 또한 설계단계에서 세그먼트의 주요 설계사항들을 개략적으로 추정하는데 활용하기 위하여, 전 세계 2,100여개 세그먼트 자료들을 조사하고 이를 기반으로 세그먼트 라이닝 외경, 세그먼트 주요 형상치수 및 세그먼트 재질들에 대한 통계분석을 실시하였다.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.985-992
• /
• 2007

There are about 40,000 chemicals used in Korea and 300 new types of chemicals are added to the list every year, influencing quality of air, soil and water. Water quality standards that serve as the basis for water quality management have been proved inefficient and insufficient compared to those of advanced countries. This study aims to improve the existing water quality standards. Most importantly, the water quality standards need to take into account not only protection of human health but also aquatic resources. To that end, water quality criteria need to be set by monitoring each watershed every year and conducting risk assessment. Criteria for human health are set at $10^{-6}$ cancer risk level, and for aquatic life at conservative level, adopting the methodology of the U.S. and Australia, respectively. After carrying out technical and economic feasibility studies, more conservative criteria will be used to decide final water quality standards. The development of this system to establish integrated water quality standards for both human health and aquatic resources protection is urgently needed.

• 한국산업융합학회 논문집
• /
• 제10권1호
• /
• pp.21-26
• /
• 2007

As DDI or GDI engine discharges very low heat due to its high thermal efficiency, the heat source is not enough for heating the passenger compartment in cold climate condition. To remedy the heating problem, the conventional HFC-134a automotive air-conditioning system has been attempted to run as a heat pump mode. Futhermore, an auxiliary electric heater of new type was equipped to the heat pump air-conditioning loop as a new approach. Hence, a proto-type heat pump air conditioner has been made and tested to investigate the feasibility of the HFC-134a automobile air-conditioning system that could be worked as a heat pump. The experiment results showed that the sufficient heating capacity could be obtained by adding a heat pump with an new electric type auxiliary heater into the conventional heat core in low temperature condition.

• 디지털융복합연구
• /
• 제14권4호
• /
• pp.79-88
• /
• 2016

평화 통일을 유도하기 위한 최우선 정책은 북한의 인터넷 개방유도이다. 남북한 ICT산업 교류협력을 위하여 인터넷 개방을 유도하기 위하여 북한의 ICT 일반표준, 인터넷 현황과 산업현황, 실현가능성 등을 분석하여 준비 과제를 도출하였다. 남북한 ICT산업 교류협력을 위한 우선과제는 낙후되어 있는 북한의 기술수준을 선진화하기 위한 노력이 필요하다. 이에 한국의 첨단 정보화 인프라를 적극 제공하여 기술격차를 줄이는 것이 선행되어야 한다. 따라서 본 연구에서는 남북 ICT산업의 국가기술규격 및 표준화를 통한 북한 인터넷 개방유도에 대하여 연구하였다.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.147-152
• /
• 2018

본 연구는 전력에너지 효율사용 분야의 주요 설비인 ESS(: Energy Storage System, 에너지저장장치)를 기반으로 한 공동주택의 수요관리 및 에너지절감 방안을 연구하고 제반 기술적 요소와 운용에 필요한 표준화를 제시함으로서 ESS 산업 확산에 기여한다. 또한, 공동주택 및 스마트 홈을 대상으로 ESS 시장의 창출을 위하여 주택 IoT 기술을 활용, 공동주택과 스마트 홈 기반 ESS을 통합하여 전력사용자의 이용 효율성과 경제성 확보가 실현되어 기존 ESS 보다 우월한 전력사용자의 수용성을 재고 할 수 있는 사업모델을 연구하고자 한다.