• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.518-525
• /
• 2019

Recently, the Sub-Committee on SDC (Ship Design and Construction) of IMO have discussed actively the technical issues associated with the second-generation intact stability criteria of ships. Generally, second generation intact stability criteria refer to vulnerability five modes ship stability which occurs when the ship navigating in rough seas. As waves passes the ship, dynamic roll motion phenomenon will affect ship stability that may lead to capsizing. Multi-tiered approach for second generation of intact stability criteria of IMO instruments covers apply for all ships. Each ship is checked for vulnerability to pure loss of stability, parametric roll, and broaching/surf-riding phenomena using L1(level 1) vulnerability criteria. If a possible vulnerability is detected, then the L2(level 2) criteria is used, followed by direct stability assessment, if necessary. In this study, we propose a new method to verify the criteria of the surf-riding/broaching mode of small ships. In case, L1 vulnerability criteria is not satisfied based on the relatively simple calculation using the Froude number, we presented the calculation code for the L2 criteria considering the hydrodynamics in waves to perform the more complicated calculation. Then the vulnerability criteria were reviewed based on the data for a given ship. The value of C, which is the probability of the vulnerability criteria for surf-riding/broaching, was calculated. The criteria value C is considered in new approach method using the Froude-Krylov force and the diffraction force. The result shows lower values when considering both the Froude-rylov force and the diffraction force than with only the Froude-Krylov force was considered. This difference means that when dynamic roll motion of ship, more exact wave force needs considered for second generation intact stability criteria This result will contribute to basic ship design process according to the IMO Second-Generation Intact Stability Criteria.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.305-311
• /
• 2012

Geology, hydrogeology, and geochemistry are the main technical siting factors of a geological repository for spent nuclear fuels. This paper focused on how rock's different geological conditions, such as topography, soils, rock types, structural geology, and geological events, influence the functions of the geological repository. In the context, the site selection criteria of various countries were analyzed with respect to the geological conditions. Each country established the criteria based on its important geological backgrounds. For example, it was necessary for Sweden to take into account the effect of ice age on the land uplift and sea level change, whereas Japan defined seismic activity and volcanism as the main siting factors of the geological repository. Therefore, the results of the paper seems to be helpful in preparing the siting criteria of geological repository in Korea.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.4
• /
• pp.283-293
• /
• 2015

The buffer is a key component of the engineered barrier system in a high-level radioactive waste (HLW) repository. The present study reviewed the requirements and functional criteria of the buffer reported in literature, and also based on the results, proposed an approach to establish a buffer concept which is applicable to an HLW repository in Korea. The hydraulic conductivity, radionuclide-retarding capacity (equilibrium distribution coefficient and diffusion coefficient), swelling pressure, thermal conductivity, mechanical properties, organic carbon content, and illitization rate were considered as major technical parameters for the functional criteria of the buffer. Domestic bentonite (Ca-bentonite) and, as an alternative, MX-80 (Na-bentonite) were proposed for the buffer of an HLW repository in Korea. The technical specifications for those proposed bentonites were set to parameter values that conservatively satisfy Korea's functional criteria for the Ca-bentonite and Swedish criteria for the Na-bentonite. The thickness of the buffer was determined by evaluating the means of shear behavior, radionuclide release, and heat conduction, which resulted in the proper buffer thickness of 0.25 to 0.5 m. However, the final thickness of the buffer should be determined by considering coupled thermal-hydraulic-mechanical evaluation and economics and engineering aspects as well.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.509-516
• /
• 2015

Intangibility, measurement difficulty and irreversibility, which are the characteristics of service, have such problems as obscurity and uncertainty in quality evaluation. Technical entrepreneurship education, a sort of public service, also contains such characteristics of service. To objectively evaluate the service quality of technical entrepreneurship education, this paper drew up factors as hierarchical structure, centered on FAHP technique, and conducted pre-processing, inputted those factors into triangular fuzzy number fuzzy judgement matrix, and calculated their weights. In this manner, this paper proposed a TESE system, through which an analysis can be conducted by drawing relative importance and priorities of the factors. The proposed system can efficiently evaluate the qualitative technical start-up education service quality factors quantitatively in the diversely changing technical start-up environment in view of the highest result quality (41%), which means performance in the relative importance of major factors. Namely, this paper confirmed that clear decision making can be made through an experiment.

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.193-223
• /
• 2014

Socio-technical systems are receiving growing attention as a core concept in the process of searching for proper solutions to sustainable growth. In this paper, we review the way for governing socio-technical transitions from a governmental perspective. Based upon the governance studies and transition research, we set social coordination and locus of transition pressures as transition contexts to differentiate transition policy governance. We propose four types of policy governance for sustainable socio-technical transitions: leading, facilitative, coordinative and persuasive. Analysis on four case based upon this typology shows different transition polices of each transition pathway in analytical aspect. It provides basic criteria for policy makers to design effective transition policies in normative aspect. Also, this paper can contribute to closing the gap between transition research and governance studies.

• Structural Engineering and Mechanics
• /
• v.58 no.5
• /
• pp.757-781
• /
• 2016

The results of diagnostics and analysis of an industrial hall located on the premises of a thermal power plant severely damaged by fire are presented in the paper. The comprehensive failure-related diagnostics, non-destructive and destructive tests of steel and concrete materials, geodetic surveying of selected structural members, numerical modelling, static analysis and reliability assessment were focused on two basic goals: The determination of the current technical condition of the load bearing structure and the assessment of its post fire resistance as well as assessing the degree of damage and subsequent design of reconstruction measures and arrangements which would enable the safe and reliable use of the building. The current mechanical properties of the steel material obtained from the tests and measured geometric characteristics of the structural members with imperfections were employed in finite element models to study the post-fire behaviour of the structure. In order to compare the behaviour of the numerically modelled steel roof truss, subjected to the effects of fire, with the real post-fire response of the damaged structure theoretically obtained resistance, critical temperature and the time at which the structure no longer meets the required reliability criteria under its given loading are compared with real values. A very good agreement between the simulated results and real characteristics of the structure after the fire was observed.

• 대한공업교육학회지
• /
• v.35 no.2
• /
• pp.25-42
• /
• 2010

This research aims to understand how students of technical high schools view 'engineering' as well as to identify the main elements that contribute to the perception on 'engineering.' The research targets are 695 senior students of technical high schools nationwide. The researcher developed the measuring tool for the experiment by referencing the adjective value criteria utilized in the semantic difference method developed by Osgood (1957). There were a grand total of 30 criteria following the preliminary studies. The results of the research are as follows. Firstly, the average value of the overall perception of technical high school students on 'engineering' is 4.27 points. This value just exceeds the standard (4 points). Secondly, when examining the general tendency it can be noticed that there is a sense of stigma that although 'engineering' is significant and valuable it is a field that is overly difficult, complex and even dangerous. Thirdly, 6 main elements that influence the perception on 'engineering' were extracted as results of the factor analysis. The first element is practicality; the second element is emotions; the third element is aesthetics; the fourth is simplicity; the fifth is responsibility; and finally the sixth element is assertiveness. Fourthly, when comparing the average values of the perception on 'engineering' by region, it was seen that there existed a difference on the perception towards 'engineering' based on differing regions.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.6
• /
• pp.564-569
• /
• 2016

Objective : This study used the intradural procedural time to assess the overall technical difficulty involved in surgically clipping an unruptured middle cerebral artery (MCA) aneurysm via a pterional or superciliary approach. The clinical and radiological variables affecting the intradural procedural time were investigated, and the intradural procedural time compared between a superciliary keyhole approach and a pterional approach. Methods : During a 5.5-year period, patients with a single MCA aneurysm were enrolled in this retrospective study. The selection criteria for a superciliary keyhole approach included : 1) maximum diameter of the unruptured MCA aneurysm <15 mm, 2) neck diameter of the MCA aneurysm <10 mm, and 3) aneurysm location involving the sphenoidal or horizontal segment of MCA (M1) segment and MCA bifurcation, excluding aneurysms distal to the MCA genu. Meanwhile, the control comparison group included patients with the same selection criteria as for a superciliary approach, yet who preferred a pterional approach to avoid a postoperative facial wound or due to preoperative skin trouble in the supraorbital area. To determine the variables affecting the intradural procedural time, a multiple regression analysis was performed using such data as the patient age and gender, maximum aneurysm diameter, aneurysm neck diameter, and length of the pre-aneurysm M1 segment. In addition, the intradural procedural times were compared between the superciliary and pterional patient groups, along with the other variables. Results : A total of 160 patients underwent a superciliary (n=124) or pterional (n=36) approach for an unruptured MCA aneurysm. In the multiple regression analysis, an increase in the diameter of the aneurysm neck (p<0.001) was identified as a statistically significant factor increasing the intradural procedural time. A Pearson correlation analysis also showed a positive correlation (r=0.340) between the neck diameter and the intradural procedural time. When comparing the superciliary and pterional groups, no statistically significant between-group difference was found in terms of the intradural procedural time reflecting the technical difficulty (mean${\pm}$standard deviation : $29.8{\pm}13.0min$ versus $27.7{\pm}9.6min$). Conclusion : A superciliary keyhole approach can be a useful alternative to a pterional approach for an unruptured MCA aneurysm with a maximum diameter <15 mm and neck diameter <10 mm, representing no more of a technical challenge. For both surgical approaches, the technical difficulty increases along with the neck diameter of the MCA aneurysm.

• Tribology and Lubricants
• /
• v.22 no.6
• /
• pp.320-328
• /
• 2006

In this study, the simulation of rolling contact fatigue based on stress analysis is conducted under Elastohydrodynamic Lubrication state. To predict a crack initiation life accurately, it is necessary to calculate contact stress and subsurface stresses accurately. Contact stresses are obtained by contact analysis of a semi-infinile solid based on the use of influence functions and the subsurface stress field is obtained using rectangular patch solutions. And a numerical algorithm using Newton-Rapson method was constructed to calculate the Elastohydrodynamic lubrication pressure. Based on these stress values, several multiaxial high-cycle fatigue criteria are used and the critical loads corresponding to fatigue limits are calculated.

• Journal of Korea Multimedia Society
• /
• v.23 no.9
• /
• pp.1201-1209
• /
• 2020

Based on the risk factor evaluation for the file format, this paper defines the procedures for presenting the long-term preservation plan for that format and the technical information registry necessary for building the system. This is a procedure to perform a risk assessment for the format, evaluate the risk, and select a long-term preservation strategy based on the information registered in the registry and information on the external signature and internal signature of the electronic record. We also reviewed the criteria for selecting appropriate long-term preservation strategies in the process and provided the criteria for adopting each detailed strategy of migration and emulation, which are long-term preservation strategies. And we implemented this process as a long-term preservation decision support system. This system can be used to provide guidelines for the maintenance, management, service and long-term preservation of information resources of electronic records in public institutions such as National Archives of Korea and Libraries.