• Restorative Dentistry and Endodontics
• /
• v.35 no.2
• /
• pp.116-124
• /
• 2010

This study aimed to assess whether the gender of the dental practitioner affects operative techniques in class 2 and class 5 resin composite restorations. In 2008, a nationwide survey was given to Korean dentists. Total 12,193 e-mails were distributed, 2,632 were opened by recipients, and 840 responses were collected. Of the respondents, 78.9% were male and 21.1% were female. The gender distribution in the age groups between respondents and the total population did not differ (p > 0.05). A chi-square test was used to compare technical differences between female and male dentists. A multiple logistic regression analysis was performed to assess the association between gender and operative techniques in resin composite restoration. For class 2 resin composite restoration, female dentists were 1.87 times more likely than male dentists to do multiple incremental fillings (four layers or more) and 2.72 times more likely than males to spend 30 minutes or more for the treatment (p < 0.05). For class 5 resin composite restoration, female dentists were 2.69 times more likely than their male counterparts to use a cavity base or liner, 1.83 times more likely to do multiple incremental fillings (four layers or more) and 1.63 times more likely to spend 20 minutes or more for the procedure (p < 0.05). The gender factor was influential to individual operative techniques in restorative treatment.

• Journal of Korea Water Resources Association
• /
• v.51 no.7
• /
• pp.543-554
• /
• 2018

A methodology has been presented for evaluating the partial safety factors on the sliding failure mode of vertical caissons of composite breakwaters and for determining the cross sections of those by Level I reliability-based design method. Especially, a mathematical model has been suggested for the sake of a consistency of code format as well as convenience of application in practical design, for which the uncertainties associated with buoyancy and its own weight can be taken into account straightforwardly. Furthermore, design criteria equation has been derived by considering accurately the effect of uplift pressure, so that the cross sections of caissons can be assessed which must be safe against the sliding failure. It has been found that cross sections estimated from partial safety factors proposed in this paper are in very good agreement with the results of Level II AFDA and Level III MCS under the same target probability of failure. However, partial safety factors of the Technical Standards and Commentaries for Port and Harbour Facilities in Japan and Coastal Engineering Manual in USA tend to estimate much bigger or smaller cross sections in comparison to the present results. Finally, many reliability re-analyses have been performed in order to conform whether the stability level of cross section estimated by Level I reliability-based design method is satisfied with the target probability of failure of partial safety factors or not.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1622-1626
• /
• 2007

This study was conducted to identify useful single nucleotide polymorphisms (SNPs) and determine their association with economically important traits in pig population. Four candidate gene analyses have identified important chromosomal regions and major genes associcated whit economic traits of the pig. For application of the chromosomal information to the pig industry using DNA technology, SNP markers were developed by comparative re-sequencing of polymerase chain reaction (PCR) products of 4 candidate genes (CSF2, IL4, MYOD, RIP140). PCR restriction fragment length polymorphism (PCR-RFLP) assays were developed for these 4 SNPs and used to genotype Berkshire pig populations in Korea.

• Journal of Distribution Research
• /
• v.7 no.1
• /
• pp.61-86
• /
• 2002

The number of people who perform their banking business on Internet has been increasing drastically during the recent period and the trend still continues. Banks and other types of financial institutions are now competing intensely with each other in attracting customers to this new innovative banking service. The marketers in charge of formulating and implementing the strategies for this new banking business need to understand the behavioral factors as well as the technical factors in order to succeed in attracting more customers to this new service. products. A deep understanding as to why and how the customers are adopting the new service developed on information technology is a prerequisite for a successful marketing effort. The purpose of this dissertation is to find out what factors are playing important roles in the customers'decision related to the adoption of the Internet banking services. The focus of the research is threefold. First. by testing the hypotheses proposed by the Technology Adoption Model, a well-known theory in the IT-related behavioral science, an analysis was made as to which factors are more important in affecting the attitudes and adoption of the Internet banking on the part of customers. Secondly, an analysis was made as to whether the three criteria of the Technographics- -the attitude toward new technology, level of income, and the motivational factor- -are useful as the criteria for segmenting the Korean users of the online banking. Thirdly, an analysis was made as to whether each customer group segmented by the criteria of the Technographics reveal a differential decision process and thus requires a differential approach strategywise.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.383-392
• /
• 2014

The research for coatings is one of the most popular and active research in the polymer industry. For the coatings, electronics industry, medical and optical fields are growing more important. In particular, the trend is the increasing of the technical requirements for the performance and accuracy of the coatings by the development of automotive and electronic parts. In addition, the industry has a need of more intelligent and automated system in the industry is increasing by introduction of the IoT and big data analysis based on the environmental information and the context information. In this paper, we propose an optimization model for the design of experiments based coating formulation data objects using the Internet technologies and big data analytics. In this paper, the coating formulation was calculated based on the best data analysis is based on the experimental design, modify the operator with respect to the error caused based on the coating formulation used in the actual production site data and the corrected result data. Further optimization model to correct the reference value by leveraging big data analysis and Internet of things technology only existing coating formulation is applied as the reference data using a manufacturing environment and context information retrieval in color and quality, the most important factor in maintaining and was derived. Based on data obtained from an experiment and analysis is improving the accuracy of the combination data and making it possible to give a LOT shorter working hours per data. Also the data shortens the production time due to the reduction in the delivery time per treatment and It can contribute to cost reduction or the like defect rate reduced. Further, it is possible to obtain a standard data in the manufacturing process for the various models.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.1
• /
• pp.53-67
• /
• 2008

Purpose : This study is descriptive correlation research to provide basic materials for developing program which can give practical assistance in preventing and managing obesity through more comprehensive approaches of influential factors on obesity found in existing literatures. Methods : Data were collected from the 4th, 5th and 6th graders at 2 elementary schools in Gwangju Metropolitan City and 4 elementary schools in Jeollanamdo province using questionnaire and students' physical examination results from June 15 to July 27, 2006 and data obtained from 1,866 students were used for analysis. Data collected were analyzed with technical statistics and correlation analysis using SPSS/PC(version 12.0). Results : 1. Obesity level of elementary school students was examined as follows; 33.2% had low weight, 44.3% normal, 10.8% overweight and 11.7% obese. 14.8% of boys and 8.6% of girls, 13.5% of the 4th graders, 12.1% of the 5th graders and 9.2% of the 6th graders, and 13.7% of urban students and 9.6% of rural students were obese. 2. According to general characteristics and obesity of the subjects, there were significant differences by sex(${\chi}^2=29.55$, p= .000), grade(${\chi}^2=12.84$, p= .046), region(${\chi}^2=41.96$, p= .000) and pocket money(${\chi}^2=33.43$, p= .001). 3. As genetic factors, all variables including sibling's obesity r= .128(p= .000), mother's obesity r= .098(p= .000) and father's obesity r= .081(p= .001) had influence on children's obesity. 4. Concerning environmental factors, there was positive correlation between eating habits r=- .052(p= .02) and school record r=- .048(p= .04) and there was negative correlation between internet using time r= .050(p= .03) and conflict with parents r= .048(p= .04). 5. Self-respect as psychological factor had negative correlation as r=- .048(p= .04). Conclusion : Consequently, the influential factors on obesity of elementary school students were as follows. Obesity was higher in boys than in girls, in urban areas than in rural areas, in lower grade than in higher grade, in children with obese siblings, obese father and mother, irregular and wrong eating habits, frequent internet uses, parents in conflict and lower school record and self-respect. Therefore, since it was found that these variables were more exact causes to increase children's obesity, development of various obesity mediation programs considering these variables at home, school and society is urgently required.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.147-153
• /
• 2016

The lightning protection of information and communication facilities is very important factor to improve a reliability of the action of these equipment. Especially the transient potential rise of ground electrode being injected with the lightning current is to be a basic data of the dielectric strength for both power and communication facilities so that more accurate analysis should be required. The transient potential rise can be calculated from the ground impedance and the ground impedance is strongly dependent upon the shape of the ground electrode and the frequency-dependence of soil. The Debye's equation which is able to calculate the characteristics of dielectrics is used to analyze the frequency-dependent of soil. Also, the method to calculate the transient potential rise from the ground impedance is specified in this paper. In order to analyze the transient potential rise resulting from calculations with Debye's equation, TLM(transmission line method) and case of ${\rho}$(resistivity)-constant are simulated, respectively. The length of a horizontal ground electrode is 30 m and simulations were performed at 10, 100, $1000{\Omega}{\cdot}m$ with the standard lightning current waveform. In result, the transient potential rise of horizontal ground electrode calculating with Debye's equation is lower than it of other models.

• Journal of Korea Port Economic Association
• /
• v.25 no.2
• /
• pp.277-300
• /
• 2009

By using data envelopment analysis(DEA) this research measures the efficiency of Korea's seven middle-sized seaports and their Malmquist productivity from 1998 to 2007. Under the assumption of CRS(constant returns to scale) and VRS(variable returns to scale), seaports' ranking of efficiency are measured. Kunsan Port is confirmed as a middle-performed port in the various measurements. Important finding facts are as follows. 1)Kunsan Port has the efficiency level from 53% to 57% of efficient ports' level under the assumption of CRS and VRS. 2)In terms of average efficiency level, the gap among these 7 seports' efficiency levels has been widened during the period from 1998 to 2007. 3)Kunsan Port has shown the characteristics of DRS more frequently in terms of returns to scale. 4) Kunsan Port's average total factor productivity has been lower at the rate of 0.7% during the period from 1998 to 2007. 5)Kunsan Port has shown technical progress at the rate of 3.1% in this period. In future research the more and better data will be expected to improve the understanding of Korean seaports' efficiency characteristics.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.2
• /
• pp.167-177
• /
• 1997

Oocyte donation program developed to reach the pregnancy in those patients suffering from premature ovarian failure or surgery induced menopause, particularly in their reproductive age. With technical advances and popularity of ART (assisted reproductive technology), the indication of oocyte donation program extended to low responders, and even to naturally menopaused patients that has led them quite successfully to getting in pregnancy. The purpose of this study was to evaluate which one is involved in the decline of fertility between the oocyte and uterine factor. One hundred five cycles of oocyte donation program were performed in 84 patients from Jan., 1993 to Dec., 1996. Oocytes were donated from healthy, young, fertile anonymous donors or relatives or infertile patients with supernumerary oocytes. The study population was divided into 3 groups according to the age of recipients. Group 1 was less than 35 years old, Group 2 was between 35 to 39 years old, and Group 3 was more than 39 years old. The results were as follows: The mean age of oocyte donor was $31.5{\pm}3.3$ (range; 25-36). The mean concentration of basal serum FSH and peak serum estradiol were not different among groups. The mean number of oocytes retrieved from donors, embryos transferred to recipients, and fertilization rate were not different among groups. The clinical pregnancy rate was 37.3% in Group 1, 31.6% in Group 2, and 31.6% in Group 3, respectively. The spontaneous abortion rate was 16.0% in Group 1, 16.7% in Group 2, and 16.7 in Group 3, respectively. The multiple pregnancy rate was 20.0% in Group 1, 16.7% in Group 2, 16,7% in Group 3, respectively, The implantation rate was 11.3% in Group 1, 10.3% in Group 2 and 10.0% in Group 3, respectively. All of the pregnancy outcomes were not different statistically among groups. In conclusion, endometrial receptivity does not seem to be impaired as age increases with transfer of good quality embryos and adequate endometrial preparation.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.30-38
• /
• 2019

The purpose of this study is to analyze the level of competitiveness of semiconductor design firms of Korea. The categories of competitiveness are divided into product development, accumulated technology, market-related competencies, human resources, and management system. The sample of 73 semiconductor design companies were used, and the analysis data were gathered by parallel with the questionnaire and the surveyor visited. For respondents, importance of competitiveness factor was prioritized using nominal scale and the competitiveness of each item is expressed based on 100 points. It was confirmed that there was a difference between the order of importance and the actual level of core competence. The ranking of the importance of core competencies is in the order of product development, technical capability, market-related competencies, human resources, and management system. However, in terms of actual competitiveness in each category, human resources were the best, followed by the management level. The product development and technology competencies were in order. The market-related competitiveness was found to be the most urgently raised. In order to increase the market related competitiveness, a new customer base must be developed and the information acquisition capability of the customer, and the ability to analyze their data needs to be improved.