• 한국학교수학회논문집
• /
• 제15권1호
• /
• pp.53-80
• /
• 2012

본 연구는 연립방정식과 연립부등식에서 탈북학생들이 나타내는 오류의 유형과 수학적 담론의 특성을 파악하여 학습의 향상을 꾀하고자 시도되었다. 이 때 담론중심의 학습은 학생들을 수학적 언어의 공동체로 이끌어내는 수단이 되어 자신감을 극복할 수 있게 돕는다. 이를 위해 다양한 배경을 지닌 5명의 탈북학생을 대상으로 2011년 1학기 서울에 위치한 모OO 대안학교에서 보충수업일환으로 8차시 연구가 수행되었다. 학습과정은 녹음되어 전사되었고, 학생의 학습지, 연구자의 관찰지가 수집되었다. 연구결과로는 탈북학생들은 기술적 오류, 기록오류, 잘못 이해된 기호, 잘못 해석된 언어, 한자어 해석오류를 보였고, 담론은 제 0수준으로부터 서서히 상위수준으로 향상은 보였으나 최상의 수준인 제 2수준~3수준은 단편적으로만 나타났다. 그러나 담론의 요소인 설명하기와 정당화하기가 활성화되면서 상호작용의 ERE 패턴에서 Ev(평가)와 Eb(정교화)가 증가하는 긍정적인 양상을 보였다.

• Computers and Concrete
• /
• 제9권4호
• /
• pp.275-291
• /
• 2012

The service loads are often decisive in the design of concrete structures. The evaluation of the cracking moment, $M_{cr}$, is an important issue to predict the performance of the structure, such as, the deflections of the reinforced concrete beams and slabs. To neglect the steel bars of the section is a simplification that is normally used in the computation of the cracking moment. Such simplification leads to small errors in the value of this moment (typically less than 20%). However, these small errors can conduce to significant errors when the values of deflections need to be computed from $M_{cr}$. The article shows that an error of 10% on the evaluation of $M_{cr}$ can lead to errors over 100% in the deformation values. When the deformation of the structure is the decisive design parameter, the exact computing of the cracking moment is obviously very important. Such rigorous computing might lead to important savings in the cost of the structure. With this article the authors wish to draw the attention of the technical community to this fact. A simple equation to evaluate the cracking moment, $M_{cr}$, is proposed for a rectangular cross-section. This equation leads to cracking moments higher than those obtained by neglecting the reinforcement bars and is a simple rule that can be included in Eurocode 2. To verify the accuracy of the developed model, the results of the proposed equation was compared with a rigorous computational procedure. The proposed equation corresponds to a good agreement when compared with the previous approach and, therefore, this model can be used as a practical aid for calculating an accurate value of the cracking moment.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.33-42
• /
• 2009

This study was performed to evaluate the hexavalent chromium content in flexography inks and organic pigments used as colorants for the ink. The digestion of sample was carried out under alkaline condition, and the content of soluble hexavalent chromium extracted from samples was determined by UV-visible colorimetric analysis method after alkaline digestion. Duplicate sampling system to obtain two digested samples, was applied in this study. To determine the hexavalent chromium content in the flexography ink and organic pigment colorimeteric analysis was employed. Because the organic pigment is the main ingredient of flexography ink it is important to remove the errors associated with the colorant of the ink in colorimetric determination. The duplicate sampling system allowed us to correct the errors associated with the colorimeteric measurement. The additional filtration was found an essential step to exclude colorimeteric error derived from the various precipitates. The soluble hexavalent chromium content in flexography inks was generally less than 5 ppm. Yellow, violet and some magenta colors showed higher soluble hexavalent chromium contents. The content of hexavalent chromium in organic pigments was greater than flexography inks, and yellow, violet and some magenta pigments contained greater amount of hexavalent chromium, which indicated that the hexavalent chromium in inks derives from the colorants. The soluble hexavalent chromium content in linerboards were below 1 ppm, and no hexavalent chromium was detected in UKP. Results suggested that flexography ink is the main factor to cause hexavalent chromium in linerboard and organic pigments.

• 무역상무연구
• /
• 제16권
• /
• pp.183-203
• /
• 2001

To accomplish international electronic commerce via the Internet, the most serious dilemma is the international payment system. The BBL is a secure and effective electronic commerce framework for the replacement of traditional paper documents by electronic messages via the Internet providing significant benefits in terms of cost savings, improved logistics and reduced errors in documentation. The most important legal obstacles in the BBL are how to secure authenticity, non-repudiation and message integrity as well as the status of negotiability equivalent to paper B/L. These kinds of functions may be carried out through the electronic title registry of the Bolero International Limited. The technical structure is supported contractually by the Bolero Rulebook. And other documents except B/L can be made out without any legal or technical problems. What are the handicaps of the BBL in its practical use at this time? I can summarize the current and expected problems as follows: First, the fee to join Bolero Association Limited is burdensome to sellers, buyers and trade related organizations all over the world. Second, the liability in errors or defaults in operating central data registry of Bolero International Limited is limited to U.S.$100,000. The amount is not sufficient to the many bulk cargo owners to cover the damages. Third, businessmen are used to traditional paper documents; therefore it takes much time for them to change their customs and practices. So the BBL and traditional papers would be used simultaneously for the time being. Finally, it is very important to incorporate the Rulebook, a multilateral contract binding on all users signed, in each domestic law, which will accomplish the uniform law basis.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.395-397
• /
• 2019

조선기술과 항해장비 기술이 발전하고 있지만 여전히 해양사고는 80%이상이 인적과실에서 비롯되고 있다. 인적과실을 저감시켜 해양사고를 절감시키려는 노력은 항해사를 대상으로 면담이나 설문을 시행하는 등 정성적인 연구방식에 많이 의존하고 있어서 객관적인 인적과실의 실체를 규명하는데 제한이 있다. 본 연구에서는 이 같은 단점을 극복하기 위하여 항해사의 항해 업무 수행을 방해하지 않으며 공간적 제한을 극복할 수 있도록 웨어러블 센서를 활용하여 항해사의 동작을 실측하고 상황인지 여부가 항해 수행 동작에 어떤 영향을 미치는지 구분하고자 한다. Full mission ship handling simulator를 활용하여 항해사가 특정한 시나리오를 수행하는 중에 위험성을 가진 장애물을 발견하기 전과 후의 어떤 행동패턴 변화를 보이는지 측정하였다. 구분된 항해 동작 패턴은 항해 위험 상황에서 적절한 조치를 취하고 있는지 여부를 객관적으로 구분하여 인적과실을 절감하는데 활용될 것으로 기대된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제3권5호
• /
• pp.548-574
• /
• 2009

Personal information (hereinafter referred to as "PI") infringement has recently emerged as a serious social problem in Korea. PI infringement in the public and private sector is common. There were 182,666 cases of PI in 2,624 public organizations during the last three years. Online infringement cases have increased. PI leakage causes moral and economic damage and is an impediment to public confidence in public organizations seeking to manage e-government and maintain open and aboveboard administration. Thus, it is an important matter. Most cases of PI leakage result from unsatisfactory management of security, errors in home page design and insufficient system protection management. Protection management, such as encryption or management of access logs should be reinforced urgently. However, it is difficult to comprehend the scope of practical technology management satisfied legislation and regulations. Substantial protective countermeasures, such as access control, certification, log management and encryption need to be established. It is hard to deal with the massive leakage of PI and its security management. Therefore, in this study, we analyzed the conditions for the technical protection measures during the processing phase of PI. In addition, we classified the standard control items of protective measures suited to public circumstances. Therefore, this study provides a standard and checklist by which staff in public organizations can protect PI via technical management activities appropriate to laws and ordinances. In addition, this can lead to more detailed and clearer instructions on how to carry out technical protection measures and to evaluate the current status.

• Steel and Composite Structures
• /
• 제23권3호
• /
• pp.273-283
• /
• 2017

In this paper, it is aimed to present a detail investigation related to structural behavior of laterally unrestrained steel cantilever roof of tribune with slender cross section. The structure is located in Tutak town in $A{\breve{g}}r{{\i}}$ and collapsed on October 25, 2015 at eastern part of Turkey is considered as a case study. This mild sloped roof structure was built from a variable I beam, and supported on steel columns of 5.5 m height covering totally $240m^2$ closed area in plan. The roof of tribune collapsed completely without any indication during first snowfall after construction at midnight a winter day, fortunately before the opening hours. The meteorological records and observations of local persons are combined together to estimate the intensity of snow load in the region and it is compared with the code specified values. Also, the wide/thickness and height/thickness ratios for flange and web are evaluated according to the design codes. Three dimensional finite element model of the existing steel tribune roof is generated considering project drawings and site investigations using commercially available software ANSYS. The displacements, principal stresses and strains along to the cantilever length and column height are given as contour diagrams and graph format. In addition to site investigation, the numerical and analytical works conducted in this study indicate that the unequivocal reasons of the collapse are overloading action of snow load intensity, some mistakes made in the design of steel cantilever beams, insufficient strength and rigidity of the main structural elements, and construction workmanship errors.

• 한국간호교육학회지
• /
• 제23권4호
• /
• pp.409-418
• /
• 2017

Purpose: Ineffective communication between healthcare professionals leads to medical errors and puts patients at risk of harm. The aim of this study was to examine the effects of interdisciplinary communication training in simulated settings on self-confidence in communication, observed communication behavior, and technical skill performances of nursing students. Methods: A repeated measures design with one group was conducted. Data was collected from 92 nursing students through a self-administered questionnaire and an observed behavior checklist. Data analysis was performed using descriptive statistics, a paired t-test, the Wilcoxon signed rank test, the Friedmann test, a Repeated Measures ANOVA, and the Spearman correlation coefficient. Results: Self-confidence in communication, observed Identification-Situation-Background-Assessment-Recommendation-Read Back communication behavior, and technical skill performances of nursing students were significantly improved. In observed communication behavior, the performance of Assessment and Read Back communication significantly improved. However, communication of Background, Assessment, and Recommendation did not improve to a satisfactory level. Observed communication behavior was not correlated with the overall technical skill performance. Conclusion: These results indicate that interdisciplinary communication training in simulated settings was effective in improving nursing students' confidence and communication skills with physicians. Longitudinal studies with larger samples are recommended in order to verify the effects of interdisciplinary communication training on clinical outcomes as well as communication competence.

• 대한수학교육학회지:수학교육학연구
• /
• 제22권2호
• /
• pp.203-227
• /
• 2012

본 연구는 교육소외 계층에 속한 학생들의 수학학습을 돕고자 시도되었다. 이를 위해 2011년 초 겨울방학 3개월을 이용하여 자원하는 학생 소수를 대상으로 탈북학생 집단과 저소득층 학생 집단에게 15차시의 보충학습이 각각 제공되었고 관찰과 면담, 그리고 녹음을 통해 자료수집이 이루어졌다. 수학학습에서 탈북학생과 저소득층 학생 모두 학습부진아들의 특징을 나타내었다. 용어에 대한 정확한 개념습득이 부족해서 설명을 하지 못하였고, 정의와 정리에 대한 이해의 정도가 낮아 그 의미를 사용해야 할 곳에 적절히 사용하지 못하는 것도 유사하였다. 게다가 확실하지 않은 지식으로 인하여 자료의 이용도 제대로 하지 못하였고, 집중력이 떨어져 부주의로 인한 오류도 자주 나타나는 것으로 보였다. 차이점으로는 탈북학생들은 남한이 외래어(영어)를 그대로 사용하는 언어적 표현에 익숙하지 않아 발생하는 기술적 오류, 한자어 해석 오류, 잘못 이용된 자료 등 오류의 특징이 생소함에서 오는 오류가 많은 반면, 저소득층 학생들은 이미 들어서 알고 있으나 연습부족에 의한 부주의가 많은 특징을 보였다.

• 시스템엔지니어링학술지
• /
• 제14권1호
• /
• pp.13-18
• /
• 2018

Plant Engineering is a series of activities going through following life cycle phases: planning, basic design, detailed design, procurement and construction, commissioning, operation and maintenance, to produce a target product. From among these phases of plant engineering life cycle, a detailed design phase is an important phase producing final design deliveries. Luckily, through technical co-operation and experiences of constructing plants, large Korean engineering companies have accumulated know-hows of efficient detailed designs. However, smaller engineering companies have less experience of performing detailed designs so there is always a risk of causing design errors in the detailed design phase. To mitigate the risk of design errors in the detailed design phase, it is necessary to systematize a concrete activity model of a detailed design phase. In this paper, we have developed a prototype of a detailed design activity model through a widely used function modeling methodology called IDEF0.