Browse > Article
http://dx.doi.org/10.12989/scs.2017.23.3.273

Collapse of steel cantilever roof of tribune induced by snow loads  

Altunisik, Ahmet C. (Department of Civil Engineering, Karadeniz Technical University)
Ates, Sevket (Department of Civil Engineering, Karadeniz Technical University)
Husem, Metin (Department of Civil Engineering, Karadeniz Technical University)
Genc, Ali F. (Department of Civil Engineering, Karadeniz Technical University)
Publication Information
Steel and Composite Structures / v.23, no.3, 2017 , pp. 273-283 More about this Journal
Abstract
In this paper, it is aimed to present a detail investigation related to structural behavior of laterally unrestrained steel cantilever roof of tribune with slender cross section. The structure is located in Tutak town in $A{\breve{g}}r{{\i}}$ and collapsed on October 25, 2015 at eastern part of Turkey is considered as a case study. This mild sloped roof structure was built from a variable I beam, and supported on steel columns of 5.5 m height covering totally $240m^2$ closed area in plan. The roof of tribune collapsed completely without any indication during first snowfall after construction at midnight a winter day, fortunately before the opening hours. The meteorological records and observations of local persons are combined together to estimate the intensity of snow load in the region and it is compared with the code specified values. Also, the wide/thickness and height/thickness ratios for flange and web are evaluated according to the design codes. Three dimensional finite element model of the existing steel tribune roof is generated considering project drawings and site investigations using commercially available software ANSYS. The displacements, principal stresses and strains along to the cantilever length and column height are given as contour diagrams and graph format. In addition to site investigation, the numerical and analytical works conducted in this study indicate that the unequivocal reasons of the collapse are overloading action of snow load intensity, some mistakes made in the design of steel cantilever beams, insufficient strength and rigidity of the main structural elements, and construction workmanship errors.
Keywords
collapse; finite element model; roof; snow; steel;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Aktas, M. and Balcioglu, H.E. (2014), "Buckling behavior of pultruded composite beams with circular cutouts", Steel Compos. Struct., Int. J., 17(4), 359-370.   DOI
2 ANSI/AISC 360-10 (2010), An American National Standard; Specification for Structural Steel Buildings, AISC Committee on Specifications, IL, USA.
3 ANSYS (2014), Swanson Analysis System, USA.
4 Augenti, N. and Parisi, F. (2013), "Buckling analysis of a long-span roof structure collapsed during construction", J. Perf. Cons. Facil., 27(1), 77-88.   DOI
5 Biegus, A. and Kowal, A. (2013), "Collapse of halls made from cold-formed steel sheets", Eng. Fail. Anal., 31, 189-194.   DOI
6 Coz Diaz, J.J., Garcia Nieto, P.J., Vilan Vilan, J.A. and Suarez Sierra, J.L. (2010), "Non-linear buckling analysis of a self-weighted metallic roof by FEM", Math. Comp. Model., 51, 216-228.   DOI
7 Biegus, A. and Rykaluk, K. (2009), "Collapse of Katowice fair building", Eng. Fail. Anal., 16, 1643-1654.   DOI
8 Caglayan, O. and Yuksel, E. (2008), "Experimental and finite element investigations on the collapse of a Mero space truss roof structure-a case study", Eng. Fail. Anal., 15, 458-470.   DOI
9 Couto, C., Vila Real, P., Lopes, N. and Zhao, B. (2016), "Numerical investigation of the lateral-torsional buckling of beams with slender cross sections for the case of fire", Eng. Struc., 106, 410-421.   DOI
10 Ghowsi, A.F. and Sahoo, D.R. (2015), "Fragility assessment of buckling-restrained braced frames under near-field earthquakes", Steel Compos. Struct., Int. J., 19(1), 173-190.   DOI
11 Helmerich, R. and Zunkel, A. (2014), "Partial collapse of the Berlin Congress Hall on May 21st, 1980", Eng. Fail. Anal., 43, 107-119.   DOI
12 Ibrahim, S.A., Dessouki, A.K. and El-Saeed, S.A. (2015), "Lateral buckling behavior and strengthening techniques of coped steel I-beams", J. Const. Steel Res., 108, 11-22.   DOI
13 Jiang, L., Qi, J., Scanlon, A. and Sun, L. (2013), "Distortional and local buckling of steel-concrete composite box-beam", Steel Compos. Struct., Int. J., 14(3), 243-265.   DOI
14 Klinger, C., Mehdianpour, M., Klingbeil, D., Bettge, D., Hacker, R. and Baer, W. (2011), "Failure analysis on collapsed towers of overhead electrical lines in the region Münsterland (Germany) 2005", Eng. Fail. Anal., 18, 1873-1883.   DOI
15 Pi, Y.L. and Trahair, N.S. (1998), "Out-of-plane inelastic buckling and strength of steel arches", J. Struct. Eng., 124(2), 174-183.   DOI
16 Kudzys, A., Lukoseviciene, O. and Baltrukenaite-Kroskiene, I. (2009), "Structural safety of rolled and welded beams subjected to lateral-torsional buckling", J. Civil Eng. Manag., 16, 172-178.
17 Kus, J. (2015), "Lateral-torsional buckling steel beams with simultaneously tapered flanges and web", Steel Compos. Struct., Int. J., 19(4), 897-916.   DOI
18 Ozakgul, K., Caglayan, O. and Tezer, O. (2011), "Investigation of buckled brace system of an existing industrial building", Eng. Fail. Anal., 18, 455-463.   DOI
19 Piroglu, F. and Ozakgul, K. (2016), "Partial collapses experienced for a steel space truss roof structure induced by ice ponds", Eng. Fail. Anal., 60, 155-165.   DOI
20 Piskoty, G., Wullschleger, L., Loser, R., Herwig, A., Tunchschmid, M. and Terrasi, G. (2013), "Failure analysis of a collapsed flat gymnasium roof", Eng. Fail. Anal., 35 104-113.   DOI
21 Saoula, A., Meftah, S.A., Mohri, F. and Daya, E.M. (2016), "Lateral buckling of box beam elements under combined axial and bending loads", J. Const. Steel Res., 116, 141-155.   DOI
22 Shi, G., Xu, K., Ban, H. and Lin, C. (2016), "Local buckling behavior of welded stub columns with normal and high strength steels", J. Const. Steel Res., 119, 144-153.   DOI
23 Sofiyev, A.H. and Kuruoglu, N. (2015), "Buckling of non-homogeneous orthotropic conical shells subjected to combined load", Steel Compos. Struct., Int. J., 19(1), 1-19.   DOI
24 TS498 (1987), Specification for Design Loads for Buildings, TSE Turkish Standards Institution, Ankara, Turkey.
25 Tagrara, S.H., Benachour, A., Bouiadjra, M.B. and Tounsi, A. (2015), "On bending, buckling and vibration responses of functionally graded carbon nanotube-reinforced composite beams", Steel Compos. Struct., Int. J., 19(5), 1259-1277.   DOI
26 Talebi, E., Tahir, M.M., Zahmatkesh, F. and Kueh, A.B. (2015), "A Numerical analysis on the performance of buckling restrained braces at fire-Study of the gap filler effect", Steel Compos. Struct., Int. J., 19(3), 661-678.   DOI
27 TEC (2007), Turkish Earthquake Code; Specification for Buildings to be Constructed in Earthquake Areas, Government of Republic, Ankara, Turkey.
28 Tong, G.S., Pi, Y.L. and Bradford, M. (2009), "Buckling failure of an unusual braced steel frame supporting an electric dust-catcher", Eng. Fail. Anal., 16, 2400-2407.   DOI
29 TS EN 1991-1-3 (2007), Eurocode 1. Actions on Structures, Part 1-3: General Actions-Snow loads; TSE Turkish Standards Institution, Ankara, Turkey.
30 TS648 (1980), Specification for Building Code for Steel Structures, TSE Turkish Standards Institution, Ankara, Turkey.