• Geomechanics and Engineering
• /
• v.37 no.3
• /
• pp.213-222
• /
• 2024

Determination of jointed rock mass properties plays a significant role in the design and construction of underground structures such as tunneling and mining. Rock mass classification systems such as Rock Mass Rating (RMR), Rock Mass Index (RMi), Rock Mass Quality (Q), and deformation modulus (Em) are determined from the jointed rock masses. However, parameters of jointed rock masses can be affected by the tunnel depth below the surface due to the effect of the in situ stresses. In addition, the geomechanical properties of rocks change due to the effect of metamorphism. Therefore, the main objective of this study is to apply correlation analysis to investigate the relationships between rock mass properties and some parameters related to the depth of the tunnel studied. For this purpose, the field work consisted of determining rock mass parameters in a tunnel alignment (~7.1 km) at varying depths from 21 m to 431 m below ground surface. At the same excavation depths, thirty-seven rock types were also sampled and tested in the laboratory. Correlations were made between vertical stress and depth, horizontal/vertical stress ratio (k) and depth, k and Em, k and RMi, k and point load index (PLI), k and Brazilian tensile strength (BTS), Em and uniaxial compressive strength (UCS), UCS and PLI, UCS and BTS. Relationships were significant (significance level=0.000) at the confidence interval of 95% (r = 0.77-0.88) between the data pairs for the rocks taken from depths greater than 166 m where the ratio of horizontal to vertical stress is between 0.6 and 1.2. The in-situ stress parameters affected rock mass properties as well as metamorphism which affected the geomechanical properties of rock materials by affecting the behavior of minerals and textures within rocks. This study revealed that in-situ stress parameters and metamorphism should be reviewed when tunnel studies are carried out.

• 대한공업교육학회지
• /
• v.36 no.2
• /
• pp.111-130
• /
• 2011

The purpose of this study was to identify a causal relationship among commitment to change, needs of technology education innovation, communication and self-efficacy of technology teachers. A total of 300 copies of questionnaires were used for data analysis except for 117 copies like the one where insincerely responds to any question was found. To ensure the reliability and validity of questions, I performed technical statistics like average, standard deviation, skewness, and kurtosis via PASW 18.0, item-total correlation and the totality, and reliability analysis. I undertook a confirmatory factor analysis via AMOS 7.0 to ensure the validity of items together with a structural analysis to perform a path analysis among variables and assess the suitability of model. The major finding of this study were as follows: First, because fit index of hypothetical model generally met standards in this study, a hypothetical model was judged appropriately. Second, needs of technology education innovation had a positive effect on communication and commitment to change of technology teachers. And, communication among technology teachers had a positive effect on commitment to change of technology teachers. This result means that communication among technology teachers is important to activation of technology education. Third, self-efficacy had a positive effect on commitment to change of technology teachers. This result means that it needs to raise self-efficacy level through teacher education.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.37-46
• /
• 2010

This study was carried out to develop new application field and obtain the basic data of mixed paper with wood pulp and chitosan fiber for producing functional paper. Two types of wood pulp, such as SwBKP and HwBKP, were mixed with chitosan fiber. Physical and optical properties, water vapor absorption, air permeability, antibacterial activity and ash were measured. And the surface morphology of manufactured paper was observed using SEM. The results are as follows. It was revealed that density, breaking length, burst index, tear index, folding endurance and brightness were reduced but water vapor absorption and air permeability were on the rise in the structural view of SwBKP according to increasing the chitosan fiber ratio. Those HwBKP added chitosan fiber were great not only in the strength but also water vapor absorption and air permeability except for brightness. The water vapor absorption was lower and the air permeability was higher in the HwBKP added various chitosan fiber ratios than those with no chitosan fiber. It is estimated that these properties were related with various mixed rate of chitosan fiber. Particularly, air permeability was strongly dependent on the mixed rate of chitosan fiber. The chitosan fiber has superior antibacterial property, comparing with wood fiber. Adding chitosan fiber to the wood pulp was found to have an excellent antibacterial activity, more than 90%. The ashes were determined within 0.5%. Special bonds between chitosan fiber and wood pulp was observed by SEM and it means that the chitosan fiber were combined equally in the interior of wood pulp. In conclusion, mixing wood pulp with chitosan fiber can not only improves the quality of paper but also extend the usage of paper as a functional paper by using inherent property of chitosan. After all, production of functional paper added chitosan fiber is expected for new valuable industry of paper.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2014

Nylon66 extrudates as a function of the extrusion number were prepared by a twin screw extruder. Chemical structures, thermal properties, melt index, crystal structures, mechanical properties such as the tensile strength, elongation at break and impact strength, and rheological property were measured by FT-IR, $^1H$-NMR, melt indexer, DSC, TGA, XRD, universal tensile tester, Izod impact tester, and rheometer. FT-IR and $^1H$-NMR characterizations indicated that the number of extrusions did not affect the chemical structure. The decrease in the molecular weight was checked by the melt index of extrudates. There were no effects of the thermal history on the melting and degradation temperature. The tensile and impact strength and modulus were found to be similar, regardless of the number of extrusions, but the elongation decreased significantly. The complex viscosity of extrudates at low frequencies decreased with the extrusion number. No structural changes after extrusion were confirmed from the fact that there was no change in the slope and shape of G'-G" plot.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.107-114
• /
• 1999

The large-scale distribution of crops Is usually determined by climate. We present the results of a climate-crop prediction based on spatial bio-physical process model approach, implemented in a GIS (Geographic Information System) environment using several regional and global agriculture-environmental databases. The model utilizes daily climate data like temperature, rainfall, solar radiation being generated stocastically by in-built model weather generator to determine the daily biomass and finally the crop yield. Crops are characterized by their specific growing period requirements, photosynthesis, respiration properties and harvesting index properties. Temperature and radiation during the growing period controls the development of each crop. The model simulates geographic/spatial distribution of climate by which a crop-growing belt can also be determined. The model takes both irrigated and non-irrigated area crop productivity into account and the potential increase in productivity by the technical means like mechanization is not considered. All the management input given at the base year 1995 was kept same for the next twenty-year changes until 2015. The simulated distributions of crops under current climatic conditions coincide largely with the current agricultural or specific crop growing regions. Simulation with assumed weather generated derived climate change scenario illustrate changes in the agricultural potential. There are large regional differences in the response across the country. The north-south and east-west regions responded differently with projected climate changes with increased and decreased productivity depending upon the crops and scenarios separately. When water was limiting or facilitating as non-irrigated and irrigated area crop-production effects of temperature rise and higher $CO_2$ levels were different depending on the crops and accordingly their production. Rise in temperature led to yield reduction in case of maize and rice whereas a gain was observed for wheat crop, doubled $CO_2$ concentration enhanced yield for all crops and their several combinations behaved differently with increase or decrease in yields. Finally, with this spatial modeling approach we succeeded in quantifying the crop productivity which may bring regional disparities under the different climatic scenarios where one region may become better off and the other may go worse off.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.244-244
• /
• 2015

Managed Aquifer Recharge (MAR) in the form of Aquifer Storage and Recovery (ASR) systems are being applied for numerous water augmentation projects both in developed and developing countries. Given the onset of Climate Change and its influence on weather patterns and land use, it has been acknowledged the utilization of this technology will be ever increasing. This technique like all others does have its drawbacks or disadvantages, whereby to overcome these drawbacks or disadvantages it is recommended that logical planning process be followed. In this study, we developed a decision framework known as "Decision framework for the planning, designing, construction/testing and implementation of subsurface water storage system" to further standardize the planning and design process of subsurface water storage system to increase the probability of having a successful ASR/ASTR project. The formulation of this framework was based on earlier frameworks, guidelines, published papers and technical reports which were compiled into a data collection database. The database of which consider both qualitative and quantitative aspect for example recharge objectives, site location, water chemistry of the native, source and recovered water, aquifer characteristics(hydraulic conductivity, transmissivity, porosity), injection/pumping rate, ecological constraints, societal restrictions, regulatory restrictions etc. The assimilation of these factors into a singular framework will benefit the broad spectrum of stakeholder as it maps the chronological order under which ASR project should be undertaken highlighting at each stage the feasibility of the project. The final stage of which should result in fully operational ASR system. The framework was applied to two case studies and through the application of a modified ASR site selection suitability index (Brown et al., 2005) a score was derived to identify the performance of each site. A high score of which meant a maximize chance of success given the reduce presence of project constraints.

• Journal of Wetlands Research
• /
• v.22 no.4
• /
• pp.245-256
• /
• 2020

The purpose of this study is to evaluate the technological competitiveness of the environmental industry with developed countries in order to establish an international market expansion strategy of the Korean environmental industry and technology. In order to evaluate the competitiveness of the environmental industry and technology, core technologies were classified by the environmental industry sectors based on the classification system of the domestic and international environmental industry and technology. After developing the evaluation index data, the Delphi analysis, journal and patent analysis, as well as the export and import analysis were carried out and the standardization analysis was performed on the index data. Moreover, the weights of each evaluation index were calculated using the AHP(Analytic Hierarchy Process) method and the evaluation results of competitiveness of the environmental industry and technology in Korea, the United States, the United Kingdom, Germany, and France were derived. As a result of the evaluation, the United States was rated with the highest technological competitiveness in all the environmental industry sectors, while Korea got the lowest technological competitiveness rating compared to the 4 developed countries. In particular, Korea got the lowest level of technological competitiveness in the sector of multi-media environmental management and development for a sustainable social system. Therefore, in order for the Korean environmental industry and technology to enter the global advanced market, it is necessary to strengthen the competitiveness through the development of the fourth environmental industry based on IoT(Internet of Things), cloud, big data, mobile, and AI(Artificial Intelligence), which are currently the country's domestic strengths.

• Korean Journal of Remote Sensing
• /
• v.30 no.3
• /
• pp.341-350
• /
• 2014

Landsat images can monitor the snow-covered Earth surface variations with the ground resolution of 30m and the multi-spectral bands in the visible, NIR, SWIR and TIR spectral regions for the last 30 years. The Southern Volcanic Zone (SVZ) of Chile consists of many volcanoes, and all of the volcanoes are covered with snow at the top of mountain. Snow cover area in southern province of the SVZ of Chile (37 to $46^{\circ}S$) have been influenced by significant frontal retreats as well as eruptive activities. In this study, we have investigated the changes of the snow-cover area and snow-line elevation at Mt. Villarrica and Mt. Llaima, Chile from three Landsat images acquired on Feb. 1990, 2005 and 2011. The snow-cover areas are 13.42, 26.75 and $21.60km^2$ at Mt. Villarrica in 1990, 2005 and 2011, respectively, and 3.82, 25.12 and $8.89km^2$ at Mt. Llaima in 1990, 2005 and 2011, respectively. The snow-line elevations are 1871, 1738 and 1826m at Mt. Villarrica in 1990, 2005 and 2011, respectively, and 2007, 1822 and 1818m at Mt. Llaima in 1990, 2005 and 2011, respectively. The results indicate that both of the snow-cover and snow-line changes are strongly related with the volcanic activity change. The results demonstrate that the snow-cover area and snow-line elevation changes can be used as an indicator of the volcanic activity at Mt. Villarrica and Mt. Llaima, Chile.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.1
• /
• pp.10-17
• /
• 2018

To prepare the integrated safety management system 'e-navigation', research is being conducted on the route exchange for sharing intended routes between ship and ship, and between ship and land. But they don't have enough specific grounds for the effects of route exchange and the necessity of its introduction and focus on technical aspects like the implementation of route exchange. This study tried to quantitatively analyze the effects of route exchange on sailing safety with the use of ship handling simulation, integrate simulation performers' subjective evaluations, and investigate the effects of route exchange. The ship-to-ship route exchange resulted in the initial collision avoidance action time was 3.43 minutes faster, the collision avoidance direction change rate was 60 %, the proximity to target A was 31 %, and Mean Rudder Angle Index decreased by 57 %. In addition, 95 % of the survey respondents had an effect on the decision making of collision avoidance, 85 % had a positive impact on safety navigation, 90 % had an accident prevention effect, 70 % reduced the psychological burden of officers, and 70 % should be introduced in practice.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.73-85
• /
• 2003

With more and more people paying attention to substantial democracy, participatory democracy is presented as a practical strategy and an index of Korean democracy. In this social and political atmosphere, participation in environmental planning and design is essential. Nonetheless, the true meaning of “participation” is not used properly because many people do not understand it correctly, The concept of social and political participation is “the action or attempt of ordinary members of society for affecting on the result of decision making.” Based on this concept, participation is accomplished through conventional means and as a form of mobilization in environmental planning and desist Most of the theories on public participation in landscape architecture are technical theories. Therefore, this paper proposes that planning and design of landscape architecture be understood as a communicative action that aims to enable stakeholders to reach a consensus through communication. This study offers the framework of theory to understand and practice planning and design of landscape architecture as a communicative action, after reviewing communicative action theory and communicative planning theory. Results suggest that communicative action theory should be accepted in landscape architecture to overcome the shortcomings of instrumental rationality -- the same way planning theory accepted this theory --and to join the culture of experts focusing on the artistic truth and the culture of life of the world. In addition, accepting communicative action theory enables the acquisition of the instrumental effect and social learning effect and the making of social capital. This study also suggested prerequisite for using the method. There should be change in the social institution and in individual action. In addition the method is composed of three steps: creating the atmosphere for communication; communicating, and; reaching a consensus among stakeholders. Finally, raising the possibility of applying the theory presented in this study requires the accumulation of know-how through trial and error.