• Journal of Korean society of Dental Hygiene
• /
• v.16 no.6
• /
• pp.835-847
• /
• 2016

Objectives: The purpose of the study was to investigate the influences of job performance of dental hygienists on emotional labor evaluation. Methods: A self-administered questionnaire was completed by 203 dental hygienists working at dental hospitals and clinics in Gyeongnam and Busan from May 2014 and March 2015. The study instruments comprised general characteristics of the subjects (9 items), job performance competency (44 items), and emotional labor evaluation (29 items) by Likert 5 point scale. Data were analyzed by SPSS 21.0 program and AMOS 18.0 program. Results: Those who had turnover intention showed higher scores in the dental treatment cooperation category and overall job performance than those who had not. Higher job performance was shown in those who had more work experience and higher salary. The scores of emotional labor evaluation were higher in the group of higher salary and team and department leaders. The job performance had a significant impact of the emotional labor evaluation. Conclusions: The job performance of dental hygienists had a significant influence on the emotional labor evaluation. Psychologic stress by work caused the dental hygienists to have depression and lower quality of life.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.1309-1312
• /
• 2009

Surface potential and growth processes of hexadecanethiol (HDT) self-assembled monolayers (SAMs) on Au(111) surfaces were examined by Kelvin probe method and scanning tunneling microscopy. It was found that surface potential strongly depends on surface structure of HDT SAMs. The surface potential shift for the striped phase of HDT SAMs chemisorbed on Au(111) surface was +0.45 eV, which was nearly the same as that of the flat-lying hexadecane layer physisorbed on Au(111) surface. This result indicates that the interfacial dipole layer induced by adsorption of alkyl chains is a main contributor to the surface potential change. In the densely-packed HDT monolayer, further change of the surface potential was observed, suggesting that the dipole moment of the alkanethiol molecules is an origin of the surface potential change. These results indicate that the work function of a metal electrode can be modified by controlling the molecular orientation of an adsorbed molecule.

• Korean Journal of Social Welfare
• /
• v.47
• /
• pp.148-177
• /
• 2001

Service learning usually has two aspects. One aspect is associated with applying class learning to related fields. The other aspect is associated with challenging and dynamic volunteering experiences. This study examined experiences of 70 social work students who took service learning courses at a university. After the courses, these students were asked regarding (1) evaluation and satisfaction of overall service learning experiences, (2) evaluation of service learning contents and the following activities, (3) the process of volunteering activities, and (4) the differences between service learning courses and other regular courses. Results were as follows: students generally regarded service learning experiences as positive; students reported understanding of social work practice and learning of professional skills; however, the service learning courses seemed to be very demanding in time and adjusting personal schedules; teamwork among students seemed to be good, especially in cooperation and emotional support; however, some students reported struggling experiences in allocating roles among team members; finally, the relationship between students and social workers at the agencies and the coordination of community resources seemed to be weak. In order for service learning courses to be more effective, this study presented some suggestions in the conclusion.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.05a
• /
• pp.31-35
• /
• 2001

Simulation --- The ideal tool for BPR. Work now and CASE tools are static modeling tools. Based on our own customers surveys, we have discovered that the use of process modeling tools thus far has focused on modeling the current(What-Is) state of a business. We have found that 90 percent of reengineering projects, the modeling tools of choice have been flowcharting tools. Static models offer help in understanding the overall nature of an existing process. However, static models can not really help you see the step by step motions towards completion of your goals. In static modeling, you see two pictures in time, usually taken at the current state and final state models of your reengineering project. Static models are usually not object oriented, therefore can not show facility or office layout and movement of entities and objects throughout the facility. However, this does not mean that static modeling does not have its application nor add value to the user as in a few success stories. Simulation helps the team analyze the complex aspects of the project. Many times a plan that looks good on paper might turn out entirely different when put into action. Therefore, simulation helps you look at how situations might work before actual implementation. In particular, computer simulation models help you view a reengineered condition before they are rolled-out. Items such as a lead time and resource allocation.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.3
• /
• pp.381-392
• /
• 2002

Purpose : The purpose of this study was to examine the degrees of turnover intention among Korean staff nurses(N=175) and to identify discriminating factors of their turnover intention. Method : The data were driven from a larger study and staff nurses who had worked more than 1 year as nurses were included in the analyses. The original data were collected from May 1999 to March 2000. Descriptive and discriminant analyses were utilized. Results : 87% of the participants reported turnover intention. Nurses were grouped into three group(GP)s depending on the frequencies of turnover intention: Never GP(N=23), Sometimes GP(N=107), Frequent GP(N=43). With three GPs, two functions were produced and only function 1 was significant that significantly discriminated Never and Frequent GPs. Additional discriminant analysis with only Never and Frequent GPs produced function classified 93% of the participants correctly into two GPs. Sub-dimensions of work satisfaction were significant discriminating factors. Nurses who are satisfied with doctor and nurse relationship, pay, and hospital administration tend to report no intention in turnover. Conclusion : Based on the findings of this study, possible managemental intervention for increasing interpersonal skills and assertiveness of nurses, inviting medical residents in ward team meeting, increasing incentives or baseline adjustment of annual income for registered nurses were suggested.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.47-52
• /
• 2016

Miller timing is one of the promising ways which can improve the fuel consumption of internal combustion engines. Indeed, Miller timing employing an early intake valve close is widely applied to large diesel and gas engines to enhance performance and reduce NOx emissions. In this study, performance evaluation is carried out by 1-D cycle simulation in order to estimate the effect of Miller CAM timing before BDC for a 32 L turbocharged diesel engine. To optimize Miller CAM timing, a single stage turbocharger is matched with an early intake valve close since boost pressure is a significant parameter that can control compression work in a turbocharged engine. The engine simulation result shows that there is enough potential to improve fuel consumption rate and also reduce NOx emissions at the same time.Abstract here.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2603-2609
• /
• 2010

Currently at port, various trials about the improvement of operating method for raising operation efficiency of transferring equipment are made, but if the delay is occurred to quay crane due to individual team method in YT operation, the problem which even arranged YT should stop the work. Therefore, this study installed wireless location determining device within yard and measured the location of YT with real-time. Also, in order to raise the location determination effect, we converted operating method into pooling operation method and arranged YT. Through this study, we can trace the movement of YT with real-time and the work control method which anlayzes and evaluates congestion of yard objectively is prepared.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.60-67
• /
• 2023

Various lifting slings are used in domestic industrial sites depending on the purpose, form, and environment. Each sling has its characteristics, and safe lifting work is possible when its performance meets the regulations. Therefore, this study analyzed domestic and foreign regulations and guidelines related to chain slings. It identified significant problems by analyzing the chain-sling-related disaster cases. The current status of chain slings used by various industries and the ways to improve chain sling safety were studied. The major chain sling issues were: 1) employing improper components to chains, 2) having different safety coefficients between the regulation and industrial standards, and 3) using chains unsuitable for lifting purposes. Based on these issues, the following measures were proposed to improve chain sling work safety: 1) revise the safety coefficient requirements under the Regulations on Occupational Safety and Health Standards, 2) disseminate specialized sling courses, and 3) strengthen on-site chain slings-related training. In the future, this study is expected to minimize chain use mistakes by unifying the safety coefficient related to chain slings and recognizing the importance of correctly selecting components employed in the chain.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.312-318
• /
• 2022

Robot-based layout automation has been recently promoted for the purpose of improving productivity and quality. Marking robots have various functional demands to secure marking precision and environmental adaptability. In particular, in order to automate marking work of building structure, correction of the marking line through position recognition of rebars placed is required. Because the rebars must maintain a constant cover thickness from the formwork surface, if the rebars are out of planned position, the rebar or marking line need to be corrected to secure the cover thickness. Thus, the marking robot for structural work needs to have the function for determining the position correction of the rebar or the marking line. In order to judge the correction of marking line, it is required to measure the distance between the planned marking line and the rebar placed. Therefore, this study proposes an algorithm that can measure the distance between the planned line and the rebar, and correct marking line for the automatic operation of the marking robot. The results of this study will be utilized as a core function for unmanned operation of the marking robot and contribute to securing precise marking by reflecting construction errors.

• Korean journal of communication and information
• /
• v.57
• /
• pp.33-48
• /
• 2012

Over the last decades, the issue of work or labor has played a critical role in prevailing discourses to represent the changed economic reality. Aesthetic labor, cultural work, network labor, team-work and alike, have played a dazzling role to represent the emerging economic order, employing the word of labor. Certainly, it is not less than a part of a wide range of shifts in order to make capital work with more effect by making up a workable and governable subject. In this article, I try to examine shifts around the media work which has contributed to expand the new discourse of 'labor.' I will say that it is quite crucial for accounting for the reality of media work to shed light on moves to represent media work, and, among others, one to transform the subjectivity involved in it among others. Furthermore, it would be necessary to take a close look at the subjectivity of media work and its modification to deal with and eliminate the precariousness of media work. Saying about media work without paying any attention to heterogenous and various practices to compose a media work, one is forced to regard media work as the matter of economic and legal interests. In addition, it would bring about that the cultural political concerns of media work will be detached from critical sight of the media cultural studies. Referring to major studies around media work in critical media studies, cultural studies and political economy of communication, this article will briefly look into the arrangement of contentions around subjectivity of media work in South Korea. And it will try to suggest what cultural-political strategy we need to investigate, fighting against the hegemonic power to generate and regulate media work and its workers in precarious conditions. It does not intend to search the media work and its complicated realities in detail in South Korea. I wish that it would make a preliminary step to propose and elaborate the critical analysis of media work and its form of subjectivities.