• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.179-182
• /
• 2010

본 연구에서는 MLS 차분법을 이용하여 동역학 문제를 해석하기 위한 explicit 동적해석 알고리즘을 제시한다. 격자망이 없는 장점을 부각시키기 위해 이동최소제곱법에 근거한 Taylor 전개로부터 미분근사를 얻고 차분식을 구성했다. 지배 미분방정식의 시간항을 CDM(Central difference Method) 차분하여 빠른 속도로 동적해석을 수행하였다. 수치결과를 통해 본 연구에서 제시한 알고리즘의 정확성과 안정성을 확인할 수 있었다.

• The Korean Journal of Applied Statistics
• /
• v.20 no.2
• /
• pp.281-290
• /
• 2007

Linear estimator, a weighted sum of the sample observation, is commonly adopted to estimate the finite population parameters such as population totals in survey sampling. The weight for a sampled unit is often constructed by multiplying the base weight, which is the inverse of the first-order inclusion probability, by an adjustment term that takes into account of the auxiliary information obtained throughout the population. The linear estimator using the weight adjustment is often more efficient than the one using only the bare weight, but its valiance estimation is more complicated. We discuss variance estimation for a general class of weight-adjusted estimator. By identifying that the weight-adjusted estimator can be viewed as a function of estimated nuisance parameters, where the nuisance parameters were used to incorporate the auxiliary information, we derive a linearization of the weight-adjusted estimator using a Taylor expansion. The method proposed here is quite general and can be applied to wide class of the weight-adjusted estimators. Some examples and results from a simulation study are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.8
• /
• pp.660-669
• /
• 2003

This paper describes a theory to calculate sound source field from the spatial transform of sound field and the measured cross-power spectrum of sound pressure over a hologram plane close to a sound source, Calculating method is proposed to solve sound pressures from cross-power spectrums over a hologram plane, For this, Taylor series for the nonlinear equations is expanded, and it is calculated using Newton-Raphon method, Also, a wave number filter is used to reduce errors that is occurred on the backward propagation, and is performed numerical simulation of the circular piston sound source with infinite baffle in water to verify the proposed theory.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.31-39
• /
• 1985

Using the tensor elastic Green functions an exact integral equation is formulated for two anisotropic precipitates embedded in an infinite anisotropic matrix; the matrix is subjected to an applied strain field or the precipitates undergo a stress-free transformation strain. This equation is reduced to an infinite system of algebraic equations by expanding the strains in Taylor series about the two points within each precipitate, and an approximation of the strain distributions within the two spherical precipitates is obtained by truncating the higher order terms. Since the present method requires no symmetry conditio between the two shperical precipitates, it is possible to obtain the strain distribution within the precipitates when the elastic constants and/or the sizes of the precipitates are different each other. The strains are expanded about arbitrary points, giving more accurate distributions of the strains than those presented elsewhere. The present method can be directly estended to the case of more than two spherical precipitates.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.122-128
• /
• 1989

In this paper we propose a new method for solving a set of nonlinear algebraic equations encountered in the DC and transient analyses of electronic circuits. This method will be called Quadratic Newton-Raphson Method (QNRM), since it is based on the Newton-Raphson Method (NRM) but effectively takes into accoujnt the second order derivative terms in the Taylor series expansion of the nonlinear algebraic equations. The second order terms are approximated by linear terms using a carefully estimated solution at each iteration. Preliminary simulation results show that the QNRM saves the overall computational time significantly in the DC and transient analysis, compared with the conventional NRM.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.27-37
• /
• 1993

An efficient method to solve the minimum weight design problem for frame structures subjected to stress and displacement constraints is presented. The different cross-sectional shapes are conside red in order to apply engineering design in which usually required custom fabrication. To increase the efficiency of the optimization process, the structural response quantities(nodal forces, displacements) are linearized with respect to cross-sectional properties or their reciprocal, based on first order Taylor series expansion, while cross-sectional dimensions are considered as design variables. Numerical examples are performed and compared with other methods to demonstrate the efficiency and reliability of approximation method for frame structural optimization with different cross-sectional shapes. It is shown that the number of finite element analysis is greatly reduced and it leads to a highly efficient method of optimization of frame structures.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.12
• /
• pp.20-26
• /
• 1999

In this paper, a multiple target angle tracking algorithm that can avoid data association problem and has a simple structure is proposed by obtaining the angular innovation of the targets from a signal subspace. The signal subspace is recursively estimated by a signal subspace tracking algorithm, such as PAST. A nonlinear matrix equation which satisfy the estimated signal subspace and the angular innovation is induced and expanded into a Taylor series for linear approximation. The angular innovation is obtained by solving the approximated linear matrix equation in the least square sense. The good performance of the proposed algorithm is demonstrated by various computer simulations.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.789-799
• /
• 2007

In this paper, we propose a stochastic finite element formulation which takes into account the randonmess in the material and geometrical parameters. The formulation is proposed for plate structures, and is based on the weighted integral approach. Contrary to the case of elastic modulus, plate thickness contributes to the stiffness as a third-order function. Furthermore, Poisson's ratio is even more complex since this parameter appears in the constitutive relations in the fraction form. Accordingly, we employ Taylor's expansion to derive decomposed stochastic field functions in ascending order. In order to verify the proposed formulation, the results obtained using the proposed scheme are compared with those in the literature and those of Monte Carlo analysis as well.

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.1
• /
• pp.19-27
• /
• 1998

We considered the bandwidth selection method which has asymptotic optimal convergence rate $n^{-1/2}$ in kernel regression function estimation. For the proposed bandwidth selection, we considered Mean Averaged Squared Error as a performance criterion and its Taylor expansion to the fourth order. Then we estimate the bandwidth which minimizes the estimated approximate value of MASE. Finally we show the relative convergence rate between optimal bandwidth and proposed bandwidth.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.299-302
• /
• 2000

본 연구에서는 원형실린더에 의한 음향파의 산란현상을 전산공력음향학 기법을 이용하여 계산하였다. 특히 전산공력음항학에서 정확도를 위해 요구되는 좌표의 직교성을 유지하기 위해서 그에 대한 적절한 관계식을 유도하였으며 정확성의 검증을 위해서 수치적인 해를 이론적인 해와 비교, 분석하였다. 공간차분법으로는 Taylor 전개를 통하여 차 정확도를 가진 차분법을 바탕으로 주파수 공간에서 최적화 된 DRP(Dispersion Relation Preserving) 기법을 사용하였으며, 시간차분법으로는 Adams-Bashford 방법을 기준으로 최적화된 4단계 외재적(explicit) 적분방법을 사용하였다 벽면 경계조건으로는 가상점 개념을 이용한 경계조건을 사용하였으며 원방 경계조건으로서는 선형화 된 Euler 방정식의 점근해(Asymptotic Solution)을 이용한 방사경계조건(Radiation Boundary Condition)을 사용하였다.