• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.816-821
• /
• 2001

The generation of isolated grids by pulsed converters with characteristics close to the mains of the utility companies is a pretentious task. For generation of three-phase four-wire isolated grids are presented possible topologies and the demands on the system control are processed. For control of all conceivable load and error conditions, an extensive control technology is necessary. This must permit unsymmetrical operating conditions for an unlimited period but recognize errors simultaneously and therefore an overloading the consumer and the power semiconductors reliable may prevent. Measurement results on an experimental plant show the problems to be solved.

• 대한인간공학회지
• /
• 제21권3호
• /
• pp.47-58
• /
• 2002

The similarity of shape of shape of interface between human cognitive map and real product is the important factor to determine the human performance. Nevertheless, the degree of similarity between these has not been defined quantitatively in recent studies. Therefore, in this study, the cognitive map and the mental workload were measured by SMM(Sketch Map Method) and RNASA-TLX(Revision of NASA-Task Load Index). And the numerical expression of the accuracy point was suggested for the quantitative calculation of relative positional similarity between cognitive map and real product. In the experiment, nine subjects were participated and two kinds of vehicles were used. Mental workload was mental workload was measured immediately after the road test. The result of analysis on the relationship between accuracy and mental workload shows that the negative correlation exists on each vehicle, and the lower score of mental workloads id measured on the vehicle that has the higher score of accuracy between two vehicles.

• 감성과학
• /
• 제4권1호
• /
• pp.1-5
• /
• 2001

The evaluation of mental workload is measured by subjective ratings, physiological signals. It takes long time to analysis the measured signals and is very tedious and time-consumming work. Therefore, to evaluate the affect of workload effectively, real-time measurement system is required. In this paper, real-time mental workload measurement system using cardiac autonomic indiced which reflect well the mental workload was developed and evaluated. Analyzed indices were HR, IBI, Lorentz plot, CSI, CVI, and LF/HF ratio of heart rate variability. The system was applied to evaluate the affect of arithmetic task and showed good results. This system was consisted of ECG amplifier, A/D converter, and personal computer, and algorithm was implemented using LabVIEW.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.148-161
• /
• 1998

We investigate a design methodology for master arm which is employed in remote-site control. Though counter-balancing has been employed for the purpose of lessening the actuator loads, it results in the increase of dynamic load at the task position. Therefore, there exists a trade-off between counter-balancing and dynamic performance. The concept of a composite index is introduced to simultaneously consider those two effects in the design of master arms. Several alternative designs of master arms are suggested.

• 한국통신학회논문지
• /
• 제32권1B호
• /
• pp.17-21
• /
• 2007

본 논문에서는 멀티미디어 네트워크상에서 우선순위가 높은 서비스의 QoS를 보장하며 동시에 프로세서의 에너지 효율을 최대화하는 적응적 온라인 프로세서 관리기법을 제안하였다. 이 기법은 현재 네트워크의 트래픽 상황을 기반으로 하여 실시간으로 프로세서를 관리한다. 제안된 방법의 가장 큰 특징은 상호 상충하는 다양한 성능 메트릭들 사이에 적정한 균형을 이루어 안정적으로 시스템을 운영하는데 있다. 컴퓨터 시뮬레이션을 통하여 기존에 제안된 프로세서 관리기법에 비해 본 논문에서 제안된 방법이 다양한 트래픽 상황에서 우수한 성능을 가지는 것을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.307-309
• /
• 2002

This paper proposes an expert system, which is able to determine the problem-solving strategy for diversity events occurred on the distribution system. The events include events related to the fault, scheduled outage and optimal operating task such as feeder line fault, line scheduled outage, line overload, system load balancing, system loss minimization, main transformer fault, main transformer scheduled outage, main transformer overload, main transformer protection control. The expert system enhances the reliability of software designed by the integrated concept for the diversity events.

• ETRI Journal
• /
• 제39권2호
• /
• pp.202-212
• /
• 2017

With the advent of the Internet-of-Things paradigm, the amount of data production has grown exponentially and the user demand for responsive consumption of data has increased significantly. Herein, we present DART, a fast and lightweight stream processing framework for the IoT environment. Because the DART framework targets a geospatially distributed environment of heterogeneous devices, the framework provides (1) an end-user tool for device registration and application authoring, (2) automatic worker node monitoring and task allocations, and (3) runtime management of user applications with fault tolerance. To maximize performance, the DART framework adopts an actor model in which applications are segmented into microtasks and assigned to an actor following a single responsibility. To prove the feasibility of the proposed framework, we implemented the DART system. We also conducted experiments to show that the system can significantly reduce computing burdens and alleviate network load by utilizing the idle resources of intermediate edge devices.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.948-954
• /
• 2008

Now, but task for stringing trolley wire is worked manually by a measurement of dip, we need to development the automatic control system for a safety and effective tasks. In this paper, in works of stringing trolley wire by a mobile of robot, a method is proposed tension control for the stringing trolley wire. On the basics of a wire model with hard nonlinear, ac servo motor model for torque generating and stringing wire tension, the tension control scheme is design and implemented with a detected wire tension by a load cell. We experimentally show that the performance of the tension response are satisfactory to regulator tension. The proposed system is simulated and experimented, results is verified the utilities.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.1000-1003
• /
• 2014

There are 70 vertical and 70 horizontal correctors for Pohang Light Source. Until mid of 2000, power supplies for these correctors were based on 1990's technology, so the global orbit feedback system was not possible with poor 12 bit resolution. A new task force team was assembled to develop new power supplies with BESSY type DAC cards. After the project, two vertical correctors in each lattice were connected with new power supplies, and the global orbit feedback was available within the accuracy of 5 microns. However, this replacement was not enough to satisfy the beam stability requirement of 2 microns for PLS. We have launched another power supply design based on all digital technology. This attempt was completed within a year, and 80 units were assembled in house. Currently, the global orbit feedback system is running successfully with new digital power supplies and the compensation of chamber motion due to the thermal load by using digital displacement transducers attached on each BPMs.

• 한국기계가공학회지
• /
• 제19권4호
• /
• pp.24-29
• /
• 2020

Measuring the torque of the wheel loader of a driving device is a preemptive task to ensure its performance. In this study, wireless torque measurements were successfully conducted. Moreover, based on the experimental results and the adopted design method, the key factor of torque generation, which is the main load in driving devices, was analyzed. Other data not analyzed in this paper will be the basis for the logical design of wheel loader-based driving devices.