• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.143-155
• /
• 2018

The Natural Landscape Rating System was introduced in the amendment of the NATURAL ENVIRONMENT CONSERVATION ACT in 2006. For landscape preservation, the system aims to consider the effects of development projects or plans implemented in a natural landscape on skylines, scenic resources, and view corridors. Currently, a lack of consistency in standards for determining Landscape Control Points (LCP) to assess landscape impact lowers the accuracy and reliability of the assessment results. As the perception of and the impact on a landscape varies, depending on the location of the LCP, it is necessary to establish a reasonable set of criteria to select viewpoints and avoid unreliability in the assessment due to unclear criteria. The intent of this study is to propose an objective and reasonable set of criteria for LCP selection to effectively measure the impact on the landscape from development projects that anticipate a change in the landscape and, ultimately, to suggest basic analysis methods to assess the landscape impact of development projects and to monitor the landscape in the future. Among the development projects affecting natural landscapes, as reported in the statement of the environmental impact assessment, cases of construction of a single building or other small-scale development projects were studied. Four spot development projects were analyzed in depth for their landscape impacts, in order to make recommendations for the LCP selection procedure, which aims to widen the scope of selection according to the direction of viewpoints from the target site. The existing results of analysis based on LCP have limitations because they failed to cover the viewshed of the target buildings when there are topographical changes in the surroundings. As a solution to this problem, a new viewshed analysis method has been proposed, with a focus on the development site and target buildings, rather than viewpoints, as used in past analysis.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.1
• /
• pp.37-43
• /
• 2008

Purpose: To evaluate dosimetry results of three different techniques for whole breast irradiation after conservative surgery of large pendulous breast patient. Materials and Methods: Planning computed tomography (CT) scans for three techniques were performed on a GE Hi-speed advantage CT scanner in the supine (SP), supine with breast supporting Device (SD) and prone position on a custom prone mattress (PP). Computed tomography images were acquired at 5 mm thickness. The clinical target volumes (CTV), ipsilateral lung and heart were delineated to evaluate the dose statistic, and all techniques were planned with the tangential photon beams (Pinnacle$^3$, Philips Medical System, USA). The prescribed dose was 50 Gy delivered in 25 fractions. To evaluate the dose coverage for CTV, we analysed percent volume of CTV receiving minimum of 95%, 100%, 105%, and 110% of prescription dose ($V_{95}$, $V_{100}$, $V_{105}$, and $V_{110}$) and minimal dose covering 95% ($D_{95}$) of CTV. The dosimetric comparison for heart and ipsilateral lung was analysed using the minimal dose covering 5% of each organs ($D_5$) and the volume that received >18 Gy for the heart and >20 Gy for the ipsilateral lung. Results: Target volume coverage ($V_{95}$ and $V_{100}$) was not significantly different for all technique. The V105 was lower for PP (1.2% vs. 4.4% for SP, 11.1% for SD). Minimal dose covering 95% ($D_{95}$) of target was 47.5 Gy, 47.7 Gy and 48 Gy for SP, SD and PP. The volume of ipsilateral lung received >20 Gy was 21.7%, 11.6% and 4.9% for SP, SD and PP. The volume of heart received >18 Gy was 17.0%, 16.1% and 9.8% for SP, SD and PP. Conclusion: Prone positioning of patient for large pendulous breast irradiation enables improving dose uniformity with minimal heart and lung doses.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.380-386
• /
• 2001

A nuclear microprobe system with adjustable precision object slits and a magnetic quadrupole doublet was designed by the beam optics simulation using a first order matrix formalism, and installed in a $30^{\circ}$ beam line connected with KIGAM 1.7 MV Tandem VDG Accelerator. Demagnification factors for x and y axis are calculated to be 25 and 4.9, respectively, and a minimum beam spot side is expected to be about 5 $\mu\textrm{m}$ for 3 MeV proton beams with a current of about 1 nA. A multi-purpose octagonal target chamber has been built to facilitate MeV ion-beam analytical techniques of PIXE, RBS, ERDA, and ion beam micro-machining. It contains X-ray and particle detectors, a zoom microscope, a Faraday cup, a 4-axis sample manipulator and a high vacuum pumping system. The system performance of the nuclear microprobe is now being tested, and automatic manipulator control and data acquisition system will be installed for routine applications of micro ion-beam analytical techniques.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.233-238
• /
• 2008

Korea has a high volume of exhaust in environmental pollutants compared to her economic size, which results from the increase of the ratio in high energy consuming industries. There arises an issue that efficient energy saving is not achieved in the related projects of the construction, which is one of the high energy consuming industries. In addition, such projects of dismantling old and decrepit buildings are frequent in recent years. Given the situation, to obtain much better effects of energy saving, it is necessary to build basic databases and develop utilization plans on energy consumption volume, exhaust volume of pollutants, and environmental expenses that come from the dismantlement stages out of the life cycle of construction projects. Therefore, this study calculates the exhaust volume of environmental pollutants, converts it into environmental expenses by pollutants, and evaluates the environmental economics on the projects of dismantling buildings, utilizing LCI DB that is suggested by Ministry of Knowledge Economy and Ministry of Environment. For this purpose, related data research, the existing literature study, and on-the-spot field investigation were conducted. Based on the results of analysis on the collected data, the environmental economics of the target building was evaluated.

• Journal of Gifted/Talented Education
• /
• v.26 no.2
• /
• pp.319-346
• /
• 2016

In this study, by examining the characteristics of boys and girls which would appear in the performance process of Goldberg machine activities, it would be attempted to provide the implications for the development and teaching methods of gifted and talented programs. The object of study was organized into separate 2 groups of boys and girls by each, composed of a total of 16 people among 5th graders of the gifted class in elementary school, located in Gyeonggi province. The final assignment was to make the Goldberg machine in order to have the beads get to the target spot latest, in which the analysis was implemented qualitatively by participating in and observing the performance process of students. After dividing the Goldberg machine activities into the steps of planning, production, outcome, assessment and reflection, their analysis results are as follows: First, in the planning stage, the girls explained minutely the process of Goldberg machine in writing, whereas the boys represented it visually simply. Second, in the production stage, the boys showed the task commitment by trying to realize the machine as designed initially, but the girls showed their appearance to represent it simply and easily. Third, in the sophistication and efficiency of the machine production, the boys were superior to the girls, and in the creativity and diversity of the use of materials, the girls were more excellent. Fourth, in the assessment and reflection, the boys evaluated it individually, and the girls showed their appearance to evaluate it by reflecting others'thinking. Hence, when developing and teaching the gifted and talented programs, it would be required that the teaching and learning contents be recomposed by considering the gender, or that the various class strategies be sought. Further, the broader and more systematic studies, on the performance process of gifted students based on the gender, should be carried out.

• The Journal of the Korea Contents Association
• /
• v.17 no.4
• /
• pp.1-11
• /
• 2017

Interest in all kinds of renewable energies has been highly increased while the micro-small-hydro power(MSHP) development has shown relatively slowly growth because of the negative public recognition about dam site development. It is, however, announced that the micro-SHP shows higher energy conversion efficiency compared to other renewable energies and does not emit any carbon dioxide. Thus, it is concerned about the development and application of micro-SHP as an alternative energy. In this study, the application for Android was exploited with Eclipse to visualize readily the potential realizable amount of hydropower by micro-SHP. With this application, we can select the region from the map, obtain the design discharge of the selected site was calculated with HEC-HMS, presented by U.S. Army of Corp. and perform the simply economic analysis in sequence. Yeongwol in Gangwon-do Province, Korea was chosen as the target area since historically abundant precipitation was found and it is possible to obtain fundamental data from WAMIS. Results from this study could be expanded the whole region of Korea. Also, the initial investment cost would be reduced if the location for micro-SHP would be determined properly, because this application can help us easily select and examine the potential micro-SHP sites without on-the-spot visit.

• Journal of the Korean Regional Science Association
• /
• v.36 no.2
• /
• pp.37-49
• /
• 2020

Currently, the average aging rate has reached 14.8% in our country, despite the residents are aging or over the average aging rate has reached 31.8% with a population of less than 100,000. Various convenience facilities are concentrated in the town center, causing inconvenience to use. The main purpose of this study is to analyze the accessability of living convenience facilities in this area. This study builds on the population aging of the research target area and distribution of living facilities for the elderly based on MDIS data of the regional survey of the National Agriculture, Forestry and Fishing Survey of the National Statistical Office, and QGIS was used to visualize the status of the elderly, distribution of convenience facilities for the elderly, hot spot maps, and distance analysis, and also technical statistical analysis was conducted. As a result of the analysis, it was confirmed that the distribution and distance of living convenience facilities for the elderly in the area where the elderly lived a lot was located in a location that caused severe inconvenience to the use of the elderly. This suggests the necessity of the change facilities type and spatial reorganization by raising the need for space policy changes on the spatial distribution of elderly convenience facilities, reflecting the serious aging of small towns such as the study area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.310-315
• /
• 2017

Although studies evaluating the effects of the blasting vibration on the adjacent structures from various angles have continued, cases of securing the safety of the adjacent buildings and researching the proper blasting method for the field condition by analyzing the vibration waveform of the measuring field while performing the open pit blasting are poor. Therefore, it is necessary to present a remedy for blasting pattern selection through test blasting that is appropriate for field conditions, and is economical and efficient. In this study, open pit blasting work was conducted based on the separation distance applied according to the standard blasting method by test blasting and the vibration regulation standard in the road expansion construction site to measure the blasting vibration value, and the vibration prediction equation by blasting methods was examined using a regression analysis computer program to calculate K, N, and R of the confidence level 95%. By setting the blasting allowed vibration standard of the test blasting target area to 0.3cm/sec, and the charring weight and blasting method by the separation distances according to the blasting vibration estimation equation of the open pit blasting guideline and the blasting vibration estimation equation of the test blasting were compared/analyzed, it was possible to identify the factors that increased the working expenses. In addition, the measurement and analysis of the adjacent structures during open pit blasting and the blasting vibration were performed after selecting the most adjacent structure to the open pit blasting spot to analyze the problems on the test blasting procedure and analysis method in the open pit blasting design/construction guidelines, which appeared in the process of completing open pit blasting construction, and a remedy is presented.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.418-421
• /
• 2002

Fundamental study on quasi-monochromatic parallel radiography using a polycapillary plate and a plane-focus x-ray tube is described. The x-ray generator consists of a negative high-voltage power supply, a filament (hot cathode) power supply, and an x-ray tube. The negative high-voltage is applied to the cathode electrode, and the transmission type target (anode) is connected to the ground potential. The maximum voltage and current of the power supply were -100 kV (peak value) and 3.0 mA, respectively. In this experiment, the tube voltage was regulated from 20 to 25 kV, and the tube current was regulated by the filament temperature and ranged from 1.0 to 3.0 mA. The exposure time is controlled in order to obtain optimum film density, and the focal spot diameter was about 10 mm. The polycapillary plate is J5022-21 made by Hamamatsu Photonics Inc., and the outside and effective diameters are 87 and 77 mm, respectively. The thickness and the hole diameter of the polycapillary are 1.0 mm and 25 ${\mu}$m, respectively. The x-rays from the tube are formed into parallel beam by the polycapillary, and the radiogram is taken using an industrial x-ray film of Fuji IX 100 without using a screen. In the measurement of image resolution, we employed three brass spacers of 2, 30, and 60 mm in height. By the test chart, the resolution fell according to increases in the spacer height without using a polycapillary. In contrast, the resolution slightly fell with corresponding increases in the height by the polycapillary. In angiography, fine blood vessels of about 100 ${\mu}$m are clearly visible.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.3
• /
• pp.347-355
• /
• 2006

A study was conducted to predict the rumen microbial protein production based on urinary excretion of purine derivatives in buffaloes fed a diet of wheat straw and concentrate (40:60) at four fixed levels of feed intake. (95, 80, 60 and 40% of preliminary voluntary feed intake) following experimental protocol of IAEA (Phase I). The buffaloes were allocated according to a $4{\times}4$ latin square design. The urinary allantoin, uric acid, total PD excretion (mmol/d) in treatments L-95, L-80, L-60 and L-40 was 20.13, 16.00, 12.96 and 9.17; 1.88, 2.12, 2.11 and 2.15; 22.01, 18.12, 15.07 and 11.32, respectively and were significantly (p<0.05) different among treatments except for uric acid. The rate of PD excretion (mmol/d) was positively correlated with the digestible organic matter intake. Variations were observed in PD and creatinine concentration in spot samples collected at 6-hour interval. However, daily PD:Creatinine ratio (PDC index) appears to be a reasonably good predictor of microbial-N supply. The contribution of basal purine excretion to total excretion of purine derivatives (PD) was determined in pre-fasting period followed by a fasting period of 6 d (Phase II). Daily PD and creatinine excretion (mmol/kg $W^{0.75}$) during fasting averaged 0.117 and 0.456 respectively for buffaloes. The excretion rates of PD decreased significantly (p<0.01) during fasting compare to pre-fasting period, the urinary creatinine excretion remained almost similar. Except for creatinine, plasma concentration of target parameters significantly (p<0.01) declined during fasting. Likewise, glomerular filtration rate (GFR) and renal clearance of allantoin and uric acid also decreased. Based on the PD excretion rates during fasting and at different levels of feed intake obtained in this study, a relationship between daily urinary PD excretion (Y-mmol) and microbial purine absorption (X-mmol) was developed for buffaloes as Y = 0.74X+0.117 kg $W^{0.75}$. The microbial N supply (g/kg DOMI) remained statistically similar irrespective of dietary treatment. The results showed that excretion of urinary purine derivatives is positively correlated with the levels of feed intake in Murrah buffaloes and thus, estimation of urinary purine derivatives and PDC index could be used to determine microbial nitrogen supply when there is large variation in level of feed intake.