• Advances in pediatric surgery
• /
• 제13권1호
• /
• pp.23-29
• /
• 2007

Tapering enteroplasty was first described by Thomas in 1969 as one method of intestinal anastomosis. The advantages of tapering enteroplasty in the intestinal atresia are: First, it makes end-to-end anastomosis possible between the atretic bowel ends with considerable differences in diameters. Second, it promotes the recover of the postoperative bowel function. Third, it prevents the possibility of the short bowel syndrome by eliminating the need of resecting the dilated bowel. A total of 22 patients with intestinal atresia who underwent tapering enteroplasty from January 1988 to December 2005 at our institute were reviewed. In 3 of 22 cases, tapering enteroplasty was the $2^{nd}$ operation after an initial end-to-oblique anastomosis. We reviewed the following items: age, sex, type and location of intestinal atresia, initial feeding and total enteral feeding start day, the length of hospital stay and complications. The average age of the patients was 7 days. Male to female ratio was 1 to 1.2 (10 cases: 12 cases). We performed the tapering enteroplasty on all types and locations of the intestinal atresia from the duodenum to the colon: type I (n=3), type II (n=4), type IIIA (n=7), type IIIB (n=5), type IIIB and IV (n=1), type IV (n=1) and type C (duodenum) and type IIIB and IV (jejunum). On the average, the oral feeds were started on the postoperative $8.8^{th}$ day, and full caloric intake via the enteric route was achieved on postoperative $13.3^{th}$ day. The average length of hospital stay was 19.6 days. There were 1 case (4.5 %) of anastomotic complication and 2 cases (9 %) of adhesive ileus among 22 patients. The tapering enteroplasty on all types of intestinal atresia is a usefull operative method when there are considerable diameter differences between the atretic bowel ends.

• 대한불안의학회지
• /
• 제1권1호
• /
• pp.37-42
• /
• 2005

Benzodiazepines are widely used for a variety of conditions in psychiatric field. In this article, the author reviewed the indications, the effects on anxiety and sleep disorders, the side effects, the drug-drug interactions, and the tapering strategies. Benzodiazepines were relatively safe and useful for the treatment of anxiety and sleep disorders. However, used clinically, benzodiazepines can induce many adverse effects (e. g. over-sedation, cognitive impairments, paradoxical effects, dependence and withdrawal symptoms, and so on). Currently available informations about their effects on the developing fetus is controversial. For this reason, pregnant women and nursing mother should be cautioned against the use of benzodiazepines. Drug-drug interactions have to be considered in combination treatments. For the tapering issues, gradual tapering was important to prevent the withdrawal symptoms. Especially, the tapering schedules have to be individualized for the each long-term benzodiapzepine users.

• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.770-773
• /
• 2021

본 논문에서는 tapering과 ferroelectric(HfO₂)구조가 적용된 3D NAND flash memory의 프로그램 이후 시간경과에 따른 retention특징을 분석했다. Nitride에 trap된 전자는 시간이 지남에 따라 lateral charge migration이 발생한다. 프로그램 이후 시간이 지남에 따라 trap된 전자가 tapering에 의해 두꺼워진 채널 쪽으로 lateral charge migration이 더 많이 발생하는 것을 확인했다. 또한 Oxide-Nitride-Ferroelectric (ONF) 구조는 polarization에 의해 lateral charge migration이 완화되기 때문에 기존 Oxide-Nitride-Oxide (ONO) 구조 보다 문턱전압(V_th)의 변화량이 줄어든다.

• 전기전자학회논문지
• /
• 제28권1호
• /
• pp.110-115
• /
• 2024

본 논문은 3D NAND Flash memory에서 tapering된 O/N/O(Oxide/Nitride/Oxide) 구조와 blocking oxide를 ferroelectric material로 대체한 O/N/F(Oxide/Nitride/Ferroelectric) 구조의 V_th(Threshold Voltage) 변화량을 분석했다. Tapering 각도가 0°일 때 O/N/F 구조는 O/N/O 구조보다 저항이 작고 WL(Word-Line) 상부와 WL 하부의 V_th 변화량이 감소한다. Tapering된 3D NAND Flash memory는 WL 상부에서 WL 하부로 내려갈수록 channel 면적이 감소하며 channel 저항이 증가한다. 따라서 tapering 각도가 증가할수록 WL 상부의 V_th가 감소하고 WL 하부의 V_th는 증가한다. Tapering된 O/N/F 구조는 channel 반지름 길이와 비례하는 V_fe로 인해 WL 상부의 V_th는 O/N/O 구조보다 더 감소한다. 또한 O/N/F 구조의 WL 하부는 O/N/O 구조보다 V_th가 증가하기 때문에 tapering 각도에 따른 V_th 변화량이 O/N/O 구조보다 더 증가한다.

• 대한치과보철학회지
• /
• 제30권2호
• /
• pp.273-285
• /
• 1992

The purpose of this study was to evaluate facial form, arch form and tooth form in young adults to determine if a correlation exists. 115 subjects who had healthy natural maxillary incisors and good occlusion consisted of 71 males and 44 females ranging from 20-30 years of age. Facial photographs and, intraoral photographs of upper anterior teeth and dental casts of upper jaws were taken to demonstrate facial form, dental arch form and tooth form. Form analysis is determined by comparing the ratio of the widths of the faces, dental archs and the teeth. The Chi-square test of independence between facial form, arch form and tooth form, was executed and the significance level determined. The results were as follows : 1. The distribution of facial forms was 66.1% square-tapering, 27.0% square, 5.2% ovoid, 2% tapering-square. 2. The distribution of tooth forms was 65.2% ovoid, 20.0% square-tapering, 11.3 % tapering-square, 3.5 % square. 3. The distribution of arch forms was 50.4 % square-tapering, 48.7 % tapering, 0.9 % reverse tapering-square. 4. There was no large differences in the distribution of facial forms, dental arch forms and tooth-forms between male and female. 5. No relationship existed between the tooth form and the facial form. 6. No relationship existed between the facial form and the dental arch form. 7. No relationship existed between the tooth form and the dental arch form. 8. This gave the impression that dental arch form and facial form could not be used as a true index in tooth selection.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.70-77
• /
• 2003

The centerless through-feed grinding is performed by passing the workpiece between the grinding wheel and the regulating wheel. So, the amount of removed material around the leading end, of the workpiece is always more than that around the trailing end until the leading end leaves the grinding wheel. Because of this, there are differences in diameters along the workpiece axis during grinding, and workpiece axis is not parallel to the grinding wheel axis and the contact lines between the workpiece and wheels. Thus the ground workpiece shows tapering error inherently. To eliminate this error, the workpiece axis must be kept to be parallel to the grinding wheel axis. And, the direction of the workpiece axis can be controlled by the work-rest blade. Therefore, the effects of work-rest blade inclination angle on the through-feed centerless ground part are investigated in this study. As a result, it is found that there is a positive inclination angle of the work-rest blade for minimizing the tapering error of a ground workpiece.

• Advances in pediatric surgery
• /
• 제1권1호
• /
• pp.27-32
• /
• 1995

Jejunal and ileal atresias are the most common cause of congenital intestinal obstruction and accounts for about 1/3 of all cases of intestinal obstruction in newborns. Despite the relative frequency of this anomaly, its survival rate was less than 10% up to 1950, more recently the survival rate has risen rapidly to 90% with the introduction of modern surgical techniques and the use of total parenteral nutrition. In 1969 Thomas described a tapering jejunoplasty to manage the discrepancy in the size of the proximal dilated lumen & contracted distal lumen, and to preserve absorptive surface when the dilated jejunum involved a long length, and Grosfeld et al.(1979) facilitated this method by using GIA staplers. Author have also used GIA stapler to resect the antimesenteric portion of the dilated proximal bowel in 8 cases of jejunoileal atresias with good results. The following results were obtained ; 1. There we 3 jejunal atresias & 5 ileal atresias, and male to female sex ratio was 5 : 3. 2. The type of atresia was as follows ; type IIIa was 3 cases, type IIIb was 4 cases, type IIIb+IV was 1 case. 3. In non-complication cases(5 cases), the mean hospital day was 16 days, and oral feeding was feasible from 6.2 days after operation. 4. The complications(anastomotic leakage, pneumonia) were frequently occurred in type IIIb cases and in low birth weight cases(75%). 5. Mortality rate was 25% including DAMA(discharge against medical advice) discharge case.

• 한국위성정보통신학회논문지
• /
• 제12권4호
• /
• pp.95-99
• /
• 2017

식 구간에서 인공위성이 필요로 하는 모든 전력을 공급하는 배터리의 수명은 인공위성의 수명과 직결된다. 배터리의 수명은 배터리 충전 방식에 의해 영향을 받으므로, 배터리 충전을 제어하는 전력제어유닛은 배터리 수명을 고려하여 설계되어야 한다. 배터리 충전은 낮 구간에서 태양전지로부터 생성된 전력을 전력제어유닛의 충전 전류 제어를 통해 이루어진다. 계절마다 다른 식 구간의 빈도를 고려하고 배터리 과충전 방지를 위하여 배터리 충전관련 변수들은 계절에 따라 각각 다르게 설계되어야 한다. 또한 충전 시 과전류 충전과 과전압 충전을 방지하기 위해 배터리 충/방전 상태, 충전전류 양, 배터리 전압, 배터리 용량, 배터리 온도, 배터리 셀 전압 등을 모니터링 하여 충전 전류를 제어한다. 인공위성에서는 각 조건을 반영하여 충전 전류를 제어하는 tapering 방식을 사용한다. 본 논문에서는 tapering 충전 방식을 적용한 인공위성 전력제어유닛의 배터리 충전 알고리즘을 설계한다. 설계된 알고리즘을 위성에 업로드 할 수 있는 코드로 변환하고 구축된 위성환경에서의 시험을 통해 동작을 검증한다.

• 전기학회논문지
• /
• 제58권6호
• /
• pp.1166-1173
• /
• 2009

In this paper, we studied on the power amplifier which has the output of the optimal to 100MHz-2GHz band. Optimal output power match was fabricated using the two types; one is the linear tapering and the other is the impedance transformer. In the case of output power match using linear tapering, output power was 35.35dBm at 2GHz and 31.41dBm at 100MHz. The other case of output match using impedance transformer, output power was 34.8dBm at 2GHz and 33.25dBm at 100MHz. Comparison of the results in the two cases, impedance transformer type present the improved results by l.84dB of output power.

• 한국음향학회지
• /
• 제14권1호
• /
• pp.115-122
• /
• 1995

균일한 소자 (안테나 또는 감지기) 간격으로 계수치를 체감하는 것보다 균일한 계수치로 소자의 간격을 체감하는 것이 실용적이며, 직사각형 어레이에서는, 삼각형 격자 구조가 직사각형 격자구조 보다 소자 수를 줄이는데 더 경제적이다. 접지판 위에 설치된 삼각형 격자 구조를 가진 직사각형 위상어레이의 성능을 향상시키기 위하여 소자간격 체감 방법을 제안하였다. 소자간격 체감이 주빔(main beam)의 폭과 측면로브(sidelobe)의 높이에 미치는 영향을 논의하였다. 제안된 방법을 사용한 결과 측면로브의 성능이 향상되었으나 주빔폭은 약간 넓어지는 것이 밝혀졌다.