• 산업기술연구
• /
• 제20권A호
• /
• pp.211-218
• /
• 2000

It is desirable but difficult to predict springback quantitatively and accurately for successful tool and process design in sheet stamping operations. The result of springback analysis by the finite element method (FEM) is sensitively influenced by numerical factors such as blank element size, number of integration points, punch velocity, contact algorithm, etc. In the present work, a parametric study by Taguchi method is performed in order to evaluate the influence of numerical factors on the result of springback analysis quantitatively and to obtain the combination of numerical factors which gives the best approximation to experimental data. Since springback is determined by the residual stress after forming process, it is important to evaluate stress distribution accurately. The oscillation in the time history curve of stress obtained by the dynamic-explicit finite element method says that the stress solution at termination time is in very unstable state. Therefore, a variability study is also carried out in this study in order to assess the stability of implicit springback analysis starting from the stress solution by explicit forming simulation. The U-draw bending process, one of the NUMISHEET '93 benchmark problems, is adopted as an application model because it is most popular one for evaluating the springback characteristic.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1410-1415
• /
• 2000

This paper introduces the experimental analysis of the resonator in the rolling piston type compressor for air conditioner. The resonator located between cylinder and bearing is a major factor in the noise reduction of the rotary compressor. Several shapes for the resonator which can be built in the space limitations are derived. Then optimal resonator type for the noise reduction is determined by noise tests. 6 design parameters of the type are found and optimal level for each design factor is deduced from Taguchi method.

• Journal of the Korean Data and Information Science Society
• /
• 제27권5호
• /
• pp.1263-1272
• /
• 2016

다구찌가 제안한 파라미터설계에서 사용되는 교차배열은 제어인자뿐만 아니라 잡음인자를 동시에 고려한 획기적인 방법으로 많은 장점이 있다. 반면 단점으로는 지나치게 많은 실험수를 필요로 하는 점이다. 실험수를 줄이기 위한 방안으로 통합배열 방법론이 제시되었다. 또 다른 단점으로 다구찌는 최적조건을 찾는데 있어서 신호대 잡음비를 사용하였는데 신호대 잡음비를 사용함에 따라 여러 가지 문제가 발생하였다. 본 논문에서는 파라미터설계에서의 단점을 개선하고자 신호대 잡음비에 의존하지 않으면서도 실험수를 줄이기 위한 대체방안을 제안하고자 한다. 아울러 파라미터설계에서 사용되는 교차배열과 실험수를 줄인 통합배열 두 가지 사례를 들어 비교 연구하고자 한다.

• 한국세라믹학회지
• /
• 제55권6호
• /
• pp.562-569
• /
• 2018

We propose an economic and facile method for the preparation of silica nanoparticles through a two-step process utilizing chlorosilane residues. Mixed chlorosilane residue was alcoholized with absolute ethanol as a first step to form tetraethoxysilane (TEOS). The TEOS was then utilized as a silicon source to synthesize silica nanoparticles in a sol-gel method. The alcoholysis process was designed and optimized utilizing the Taguchi experimental design method and the yield of TEOS was as high as 82.2% under optimal synthetic conditions. Similarly, the Taguchi method was also utilized to study the effects of synthesis factors on the particle size of silica nanoparticles. The results of statistical analysis indicate that the concentration of ammonia has a greater influence on particle size compared to the mass fractions of TEOS and polyethylene glycol (4.6% and 9.7%). The purity of the silica particles synthesized in our experiments is high, but the specific surface area and pore volume are small.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.237-240
• /
• 2004

Sulfur Hexafluoride, SF6 is widely used for leak detection and as a gaseous dielectric in transformers, condensers and circuit breakers. SF6 gas is also effective as a cleanser in the semiconductor industry. This paper presents a numerical study of the sealing force of disk type seal in SF6 gas safety valve. The sealing force on the disk seal is analyzed by the FEM method based on the Taguch's experimental design technique. Disk seals in SF6 gas safety valve are designed with 9 design models based on 3 different contact length, compressive ratio and gas pressure. The calculated results of Cauchy stress and strain showed that the sealing characteristics of Teflon PTFE is more effective compared to that of FKM(Viton), which is related to the stiffness of the materials. And also, the contact length of the disk seal is important design parameter for sealing the SF6 gas leakage in the safety valve.

• 품질경영학회지
• /
• 제21권1호
• /
• pp.96-107
• /
• 1993

In parameter design Taguchi analyzed a statistic which he called signal-to-noise(SN) ratio by using the experimental design technique. However he gave no justification for using SN ratios in the optimization procedure of parameter design. In this paper we discuss the validity of such SN ratios as proper statistics to be analyzed in parameter design. Moreover, using the real empirical data we examine the appropriateness of SN ratios, and we explain how transformation technique can be applied in parameter design as an alternative method of analysis.

• 공업화학
• /
• 제29권2호
• /
• pp.215-224
• /
• 2018

염산 5, 10, 15 wt% 용액(1.5, 3.0, 4.5 M; 석유정 산성화에 사용되는 범위)에 대하여 여러 가지 조건에서 자기장이 미치는 영향을 연구하였다. 자화된 염산의 pH 변화를 정상적인 염산과 비교하였다. Taguchi 실험 설계법을 사용하여 자장강도, 농도, 유속, 온도 및 시간의 영향을 모델링하였다. 실험 결과 자화에 따라 염산의 $H^+$ 농도가 42%까지 감소하였다. 자장 강도(기여도 28%), 염산의 농도(기여도 42%), 유속이 커지면 자기장 적용의 효과가 증가하였다. 염산에 대한 자기장의 영향은 용액의 유속과 가열에 의하여 영향받지 않았으며 시간에 따른 자기장 메모리가 유지되는 것으로 나타났다. 최대 $H^+$ 농도 변화에 대한 최적의 조합은 10% 염산 용액 및 4,300 Gauss일 때로 얻어졌다. 자화 과정 중 염산의 반응 속도가 감소하므로 자화된 염산은 탄화수소(원유 및 천연가스)정의 매질 산성화에 대한 대체 지연제로 비용면에서 경제적이고 신뢰성 있는 방법이 될 것으로 제안한다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.84-89
• /
• 2003

The finite element method (FEM) is typically used in the process of motor design. However, the FEM requires computation time, Therefore, decreasing the number of FEM simulations may also decrease the simulation cost. Several optimal design methods overcoming this problem have been recently studied. This paper investigates the optimal design of the magnet pole of a BLDC motor through reducing simulation cost. The optimization minimizes the magnet volume and limits the average and cogging torques to certain values. In this paper, the response surface methodology and Taguchi's table for reducing the number of FEM simulations are used to approximate two constraints. The optimization result shows that the presented strategy is satisfactorily performed.

• Macromolecular Research
• /
• 제16권8호
• /
• pp.734-740
• /
• 2008

A new crosslinked, poly(acrylic acid)-based, dehydrating agent was synthesized through solution polymerization. The Taguchi method, a robust experimental design, was adopted to optimize the synthetic conditions based on the moisture and water absorbing capacities of the dehydrating agent. The method applied for the experiment was a standard L27 ($3^8$) orthogonal array with eight parameters and three levels. By analyzing the variance of the test results, the most effective parameters to control the moisture absorbing capacity (MAC) and its rate were the kind of alkaline base (LiOH, NaOH, or KOH) used as a neutralizing agent of the acrylic acid monomer and the degree of neutralization: The maximum MAC of 40% was achieved at only 2 hat $32^{\circ}C$ and 50% RH when KOH was used as a base and the degree of neutralization was 90%, respectively. However, the water absorbing capacity (WAC) of the resulting dehydrating agent was very low at 158 g/g, indicating that WAC is unaffected by MAC and its rate in this system. The surface morphologies of the agents were examined using scanning electron microscopy (SEM).

• 대한기계학회논문집A
• /
• 제36권1호
• /
• pp.109-116
• /
• 2012

현재 천공장비 및 천공방법에 대한 많은 연구가 진행되고 있지만 DTH hammer의 타격성능을 규명하고 최적화에 대한 연구는 전무하다. 또한 DTH drilling의 시험 장비를 구축하기 위해서는 막대한 비용과 많은 시간이 요구되기 때문에 성능규명에 있어 시험적으로 접근하기가 매우 곤란한 실정이다. 따라서 본 논문에서는 DTH hammer의 구동원리를 파악 후 공압 해석을 이용하여 구동 특성 및 성능을 규명하였다. 또한 실험계획법을 이용하여 DTH hammer의 성능에 영향력이 있는 설계인자를 도출하고 이를 다구찌 기법에 적용해 DTH hammer의 타격성능인 타격수와 타격에너지의 최적화에 대한 연구를 수행하였다.