• 반도체디스플레이기술학회지
• /
• 제2권2호
• /
• pp.5-8
• /
• 2003

In this study, as Cu diffusion barrier, tantalum nitrides were successfully deposited on Si(100) substrate and $SiO_2$ by plasma assisted atomic layer deposition(PAALD) and thermal ALD, using pentakis (ethylmethlyamino) tantalum (PEMAT) and NH$_3$ as precursors. The TaN films were deposited at $250^{\circ}C$ by both method. The growth rates of TaN films were 0.8${\AA}$/cycle for PAALD and 0.75${\AA}$/cycle for thermal ALD. TaN films by PAALD showed good surface morphology and excellent step coverage for the trench with an aspect ratio of h/w -1.8:0.12 mm but TaN films by thermal ALD showed bad step coverage for the same trench. The density for PAALD TaN was 11g/cmand one for thermal ALD TaN was 8.3g/$cm^3$. TaN films had 3 atomic % carbon impurity and 4 atomic % oxygen impurity for PAALD and 12 atomic % carbon impurity and 9 atomic % oxygen impurity for thermal ALD. The barrier failure for Cu(200 nm)/TaN(10 nm)/$SiO_2$(85 nm)/ Si structure was shown at temperature above $700^{\circ}C$ by XRD, Cu etch pit analysis.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.874-879
• /
• 1995

고 포화자속밀도를 갖는 Fe미세결정 박막의 자기특성 및 미세구조에 미치는 첨가원소의 영향을 조사하였다. Mo 첨가 박막의 경우, $Fe_{2}Mo$, $Fe_{4}N$, $Fe_{3-2}N$상의 생성으로 연자기 특성이 발현되지 않았다. Ta첨가 박막의 경우, 미세한 TaN, TaC 상이 석출하여 $\alpha$-Fe 결정립을 효과적으로 미세화 시켰으며 Fe 질화물의 생성도 억제되었다. 이에 따라 우수한 연자기 특성이 발현되었으며 FeTaN계 박막은 4000, FeTaC 박막은 2700의 높은 투자율을 나타내었다.

• 한국재료학회지
• /
• 제7권6호
• /
• pp.498-504
• /
• 1997

Cu는 AI보다 비저항이 더 낮고, 일렉트로마이그레이션 내성이 더 강하기 때문에 AI을 대체하여 사용될 새로운 상부배선 재료로 널리 연구되고 있다. 그러나 Cu는 SiO$_{2}$층을 통해 Si기판 속으로 확산하는 것과 같은 열적불안정성을 갖고 있으므로 Cu 배선을 위해서는 barrier금속을 함께 사용해야 한다. 지금까지 알려진 가장 우수한 재료는 TaSi$_{x}$N$_{y}$이다. Tasi$_{x}$N$_{y}$는 90$0^{\circ}C$에서 불량이 발생하는 것으로 보고된 바 있으나, 그것의 barrier특성과 관련하여 확인하고 또 새로 조사되어야 할 내용들이 많이 있다. 본 연구에서는 반응성 스퍼터링 테크닉을 사용하여 (100)Si 웨이퍼상에 TaSi$_{x}$N$_{y}$막을 증착하고, Cu에 대한 barrier재료로서 반드시 갖추어야 할 열적 안정성을 면저항의측정, X선 회절 및 AES 깊이분석 등에 의하여 조사하였다. 스퍼터링 공정에서 N$_{2}$/Ar기체의 유량비가 15%일때 열적 안정성이 가장 우수한 TaSi$_{x}$N$_{y}$막이 얻어졌다. Ta와 TaN은 각각 $600^{\circ}C$와 $650^{\circ}C$에서 불량이 발생하는 반면, TaSi$_{x}$N$_{y}$는 90$0^{\circ}C$에서 불량이 발생하였다. TaSi$_{x}$N$_{y}$의 불량기구는 다음과 같다:Cu는 TaSi$_{x}$N$_{y}$막을 통과하여 TaSi$_{x}$N$_{y}$/Si계면으로 이동한 다음 Si기판내의 Si원자들과 반응한다. 그 결과 TaSi$_{x}$N$_{y}$Si가 생성된다.

• 대한화학회지
• /
• 제31권6호
• /
• pp.486-490
• /
• 1987

$CCl_4$속에서 티오아세트산아미드(TA)와 몇가지 아미드(N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMA) and N,N-dimethylpropionamide (DMP)) 사이의 수소결합이 TA의 N-C(S) 결합 주위의 부자유 회전에 미치는 영향을 nmr 분광학적인 방법으로 연구하였다. $CCl_4$분율이 증가할 때 TA의 $NH_2$기의 양성자 nmr 스펙트럼은 이중선으로 뚜렷하게 분리되었으며, 그 정도는 DMF < DMA < DMP순으로 증가하였다. 이런 현상을 TA와 아미드사이의 분자간 수소결합으로 설명하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.65-65
• /
• 1997

• 한국초전도ㆍ저온공학회논문지
• /
• 제23권2호
• /
• pp.1-5
• /
• 2021

We have investigated the electrical transport properties of polycrystalline tantalum nitride (TaN_x) films. Various compositions of tantalum (nitride) thin films have been deposited on SiO₂ substrates by reactive DC magnetron sputtering while changing the ratio of nitrogen partial pressure. The substrate temperature was maintained at 283 K during deposition. X-ray diffraction analyses indicated the presence of α-Ta and β-Ta phases in the Ta film deposited in pure argon atmosphere, while fcc-TaN_x phases appeared in the sputtering gas mixture of argon and nitrogen. The N/Ta atomic ratio in the film increased ranging from 0.36 to 1.07 for nitrogen partial pressure from 7 to 20.7%. The superconducting transition temperatures of the TaN_x thin films were measured to be greater than 3.86 K with a maximum of 5.34 K. The electrical resistivity of TaN_x thin film was in the range of 177-577 𝜇Ωcm and increased with an increase in nitrogen content. The upper critical filed at zero temperature for a TaN_0.87 thin film was estimated to exceed 11.3 T, while it showed the lowest T_c = 3.86 K among the measured superconducting TaN_x thin films. We try to explain the behavior of the increase of the residual resistivity and the upper critical field for TaN_x thin films with the nitrogen content by using the combined role of the intergrain Coulomb effect and disorder effect by grain boundaries.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.180-184
• /
• 2002

In this paper, the electrical properties of PVD Ta and $TaN_x$ gate electrodes on $SiO_2$ and their thermal stabilities are investigated. The results show that the work functions of $TaN_x$ gate electrode are modified by the amount of N, which is controlled by the flow rate of $N_2$during reactive sputtering process. The thermal stability of Ta and $TaN_x$ with RTO-grown $SiO_2$ gate dielectrics is examined by changes in equivalent oxide thickness (EOT), flat-band voltage ($V_{FB}$), and leakage current after post-metallization anneal at high temperature in $N_2$ambient. For a Ta gate electrode, the observed decrease in EOT and leakage current is due to the formation of a Ta-incorporated high-K layer during the high temperature annealing. Less change in EOT and leakage current is observed for $TaN_x$ gate electrode. It is also shown that the frequency dispersion and hysteresis of high frequency CV curves are improved significantly by a post-metallization anneal.

• 한국재료학회지
• /
• 제12권10호
• /
• pp.814-819
• /
• 2002

TiN and TaN films as electrode materials of reactive sputtered $Ta_2$$O_{5}$ were prepared by sputtering to compare their thermal stabilities with $Ta_2$$O_{5}$ The microstructural change of $Ta_2$$O_{5}$ films with annealing was also investigated. As- deposited $Ta_2$$O_{5}$ film on $SiO_2$ was amorphous and annealing of 80$0^{\circ}C$ for 30 min made it transform to $\beta$-Ta$_2$O$_{5}$ crystalline which contains amorphous particles with the size of a few nm. Crystallization temperature of Ta$_2$Ta_2$$O_{5}$ on TaN is higher than that on TiN electrode. The interface between TaN and Ta$_2$O$_{5}$ maintained stably even after vacuum annealing up to $800^{\circ}C$ for 1 hr, but TiN interacted with $Ta_2$$_O{5}$ and so interdiffusion between TiN and $Ta_2$$O_{5}$ occurred by vacuum annealing of 80$0^{\circ}C$ for 1 hr. It indicates that TaN is thermally more stable with $Ta_2$$O_{5}$ than TiN.N.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.537-540
• /
• 2001

This paper presents the characteristics of Ta-N thin-film for high precision resistors, which were deposited on Si substrate by DC reactive magnetron sputtering in an argon-nitrogen atmosphere(Ar-(4~16 %)$N_2$). Structural properties studied using X-ray diffraction(XRD) indicate the presence of TaN, $Ta_3N_5$ or a mixture of Ta-N phases in the films depending on the amount of nitrogen in the sputtering gas. The chemical composition are investigated by auger electro spectroscopy(AES). The optimized conditions of Ta-N thin-film resistors were deposited in 4 % $N_2$ gas flow ratio. Under optimum conditions, the Ta-N thin-film resistors are obtained a high resistivity, $\rho=305.7{\mu}{\Omega}cm$, a low temperature coefficient of resistance, TCR=-36 $ppm/^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.537-540
• /
• 2001

This paper presents the characteristics of Ta-N thin-(ibm for high precision resistors, which were deposited oni substrate by DC reactive magnetorn sputtering in an argon-nitrogen atmosphere(Ar-(4∼16%)N$_2$). Sturcutural properties sutided using X-ray diffraction (XRD) indicate the presence of TaN, Ta$_3$N$\sub$5/ or a mixture of Ta-N phases in the films depending on the amount of nitrogen in the sputtering gas. The chemical composition are investigated by auger electro spectroscopy(AES). The optimized conditions of Ta-N thin-film resistors were deposited in 4 % N$_2$ gas flow ratio. Under optimum conditions, the Ta-N thin-film resistors are obtained a high resistivity, $\rho$=305.7 ${\mu}$Ωcm, a low temperature coefficient of resistance, TCR=-36 ppm/$^{\circ}C$.