• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.343-343
• /
• 2015

고종횡비의 실리콘 관통전극(TSV)은 반도체 3차원 적층을 실현하기 위한 핵심적인 기술이다. TSV의 충전은 주로 전해도금을 이용하는데 무결함 충전을 위해서 도금액에 몇 가지 첨가제(억제제, 가속제, 평탄제)가 포함된다. 본 연구에서는 첨가제 유무 따른 비아 충전 양상 및 무결함 충전에 대한 연구를 진행하였다. 비아 충전 공정을 위해서 직경 10 um, 깊이 50 um의 TSV가 패터닝된 웨이퍼를 준비하였으며 도금 후 단면을 관찰하여 도금의 양상을 비교하였다. 도금액에 첨가제가 포함되지 않는 조건, 억제제와 가속제만 포함된 조건, 세 가지 첨가제가 모두 포함된 조건으로 비아 충전을 실행하였으며 최종적으로 무결함 충전이 되는 첨가제 조건을 찾을 수 있었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.55 no.3
• /
• pp.338-344
• /
• 2022

This study evaluated the external form of Rhodeus notatus TSV (transparent-scaled variant) type identified in Korea for the first time and compared it with that of the normal type. The TSV units newly found on Rhodeus notatus are iii10 of dorsal fin and anal fin iii10, which are similar to that in the normal type, considering the observing coefficient of each part's fins. The external form is, transparent enough to see the red gill filament in the operculum, the spiral digestive organ is observed opaquely, and numerous melanophores are stained at the upper part of abdomen. The coloration and scales are different between TSV type and normal type; however, there is no difference in the external form and meristic character.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.4
• /
• pp.49-53
• /
• 2011

High-speed Cu filling into a through-silicon-via (TSV) and simplification of bumping process by electroplating for three dimensional stacking of Si dice were investigated. The TSV was prepared on a Si wafer by deep reactive ion etching, and $SiO_2$, Ti and Au layers were coated as functional layers on the via wall. In order to increase the filling rate of Cu into the via, a periodic-pulse-reverse wave current was applied to the Si chip during electroplating. In the bumping process, Sn-3.5Ag bumping was performed on the Cu plugs without lithography process. After electroplating, the cross sections of the vias and appearance of the bumps were observed by using a field emission scanning electron microscope. As a result, voids in the Cu-plugs were produced by via blocking around via opening and at the middle of the via when the vias were plated for 60 min at -9.66 $mA/cm^2$ and -7.71 $mA/cm^2$, respectively. The Cu plug with a void or a defect led to the production of imperfect Sn-Ag bump which was formed on the Cu-plug.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.697-698
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.18-22
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.23-31
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.32-40
• /
• 2009

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.41-46
• /
• 2009

• Journal of Welding and Joining
• /
• v.30 no.3
• /
• pp.21-25
• /
• 2012

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.5
• /
• pp.563-571
• /
• 2012

In 3D integration package using TSV technology, bonding is the core technology for stacking and interconnecting the chips or wafers. During bonding process, however, warpage and high stress are introduced, and will lead to the misalignment problem between two chips being bonded and failure of the chips. In this paper, a finite element approach is used to predict the warpages and stresses during the bonding process. In particular, in-plane deformation which directly affects the bonding misalignment is closely analyzed. Three types of bonding technology, which are Sn-Ag solder bonding, Cu-Cu direct bonding and SiO2 direct bonding, are compared. Numerical analysis indicates that warpage and stress are accumulated and become larger for each bonding step. In-plane deformation is much larger than out-of-plane deformation during bonding process. Cu-Cu bonding shows the largest warpage, while SiO2 direct bonding shows the smallest warpage. For stress, Sn-Ag solder bonding shows the largest stress, while Cu-Cu bonding shows the smallest. The stress is mainly concentrated at the interface between the via hole and silicon chip or via hole and bonding area. Misalignment induced during Cu-Cu and Sn-Ag solder bonding is equal to or larger than the size of via diameter, therefore should be reduced by lowering bonding temperature and proper selection of package materials.