• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.15-20
• /
• 2000

In this paper. Thermally Stimulated Current spectra have been measured in the Polypy - romellitimide (polyimide). As a result of the investigation. three peaks have been observed: $A(50^{\circ}C)$, $B(120^{\circ}C)$, $C(200^{\circ}C)$. Among three peaks, C peak has been observed in detail. The C peak is shown to be created due to the polarization of ionic space charge from the experimental results which were measured as a function of forming time, forming temperature. forming voltage and collecting voltage. As a result, we have measured the TSC in ion ($Na^+$) implanted - Polyimide, also found the peak at $215^{\circ}C$. Therefore, TSC characteristics in the C peak is probably caused by residual impurity. And The activation energy caculated by means of initial rising method 1.8eV, hopping distance. $90{\AA}$. and the mobility. $2.88{\times}10^{-11}cm^2/v.s$

• E2M - 전기 전자와 첨단 소재
• /
• 제7권1호
• /
• pp.32-41
• /
• 1994

In this study, the TSC spectroscopy has been applied to investigate the influence of structural change due to a process of curing reaction on the electrical properties of epoxy composites cured with acid-anhydride. Five TSC peaks appeared in -160-250[.deg.C]: in the low temperature region below glass transition temperature(T$\_$g/), three relaxation mode peaks due to action of side chains, substitution group or terminal groups have been observed, a peak associated with T$\_$g/, appeared in 110[.deg. C] and p peak due to ionic space charges located in 150[.deg.C]. Each peak was separated into elementary peaks by the partial polarization procedure, and the distribution of activation energy and relaxation time were analized to clearify the origin of each peak. Also, overaboundantly added hardener separated a .betha. peak near 10[.deg. C] into two peaks of .betha.$\_$1/(10.deg. C) and .betha.$\_$2/(20.deg. C) according to increasement of forming field, and the separated hardener was oxidated thermally with increasing surrounding temperatures. The expansion of the free volume need in molecular motion and the reduction of the structural packing density through thermal oxidation process increased TSC between .alpha. peak and .betha. peak and decreased T$\_$g/.

• E2M - 전기 전자와 첨단 소재
• /
• 제4권1호
• /
• pp.53-64
• /
• 1991

절연체중에 있는 하전입자의 거동은 절연재료의 특성에 많은 영향을 준다. 본 연구에서는 호핑모델에 의한 수치해석법을 TSC특성과 쌍극자분극에 대한 TSC특성은 차이가 있었다. 실험과 대응시켜 가동이온에 관한 물성정수의 평가를 하였다. 호핑모델에 의해서 불포화 TSC와 I-V특성의 수치계산을 하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제4권1호
• /
• pp.12-18
• /
• 1991

각종 monomer를 공중합시킨 고분자 필름의 X선 유기 TSC(thermally-stimulated current)를 측정하고 polyethylene(PE)의 절연성능 개선의 관점에서 공중합 monomer의 영향에 대하여 검토하였다. PE의 X선 유기 TSC 피이크는 결정화도가 높을 수록 고온측으로 이동하였다. X선 유기 TSC에서 피이크는 공중합에 의하여 Br 및 F원자가 0.2~0.4eV의 전자 trap이 도입된 것으로 생각된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.212-215
• /
• 1995

The thermally stimulated currents (TSC) are measured to know the behaviour of charging particles of epoxy composites at the temperatures range -160~200[$^{\circ}C$] and to prove the various aspects due to hardening time in this study. It is composites at the narrower the magnititude of peak is and hardening time is a degradation from this.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.135-138
• /
• 1995

This paper presents a method to calculate the escape frequency factor and its verification from TSC(Thermally Stimulated Current) equation and cures. To apply calculation method of ν using asymptotic estimation, it utilized two sets of TSC data with 1K interval. This method enables one to get the exact value of ν and activation energy at the same time by using computer programming. So, it regards their calculation method as a useful process to obtain the value of physical behavior.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.421-422
• /
• 2012

본 연구에서는 코로나 대전된 고분자의 열자격전류(Thermally Stimulated Current; 이하 TSC) 데이터를 기반으로 코로나 대전 과정을 유한요소법(Finite Element Method; 이하 FEM)을 이용하여 시뮬레이션하였다. $DC -5{\sim}-8[kV]$의 고전압을 고분자에 인가하여 형성시킨 일렉트렛트를 온도 범위 $-100{\sim}+200[^{\circ}C]$에서 얻은 TSC 데이터의 대전 과정을 조사하기 위하여 FEM으로 시뮬레이션을 수행하여 공간에서 코로나 대전 과정을 추정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1990년도 추계학술대회 논문집
• /
• pp.91-94
• /
• 1990

The behavior of charged particle in dielectrics have a many effects on characteristics of the insulating materials. In this paper, numerical analysis method by hopping model was investigated application of TSC. As the results, there was a difference between characteristics of TSC by dipole polarization. Physical constant of movable ion corresponding to the experimental results was evaluated and also. Numerical calculations of unsaturated TSC and I-V characteristics were carried out by was of hopping model.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.260-263
• /
• 1996

The thermally stimulated currents(TSC) are measured to know the behaviour of charging particles of epoxy composites at the temperature range of -160∼200[$^{\circ}C$] and to prove the variation according to curing time in this study. It is confirmed that the peak amplitude is inversely proportional to the curing time, and TSC are reduced is and T$\sub$m/ is moved to high temperature side according to the curing time because carboxyl radical is formed by thermal oxidation and motility becomes lack.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권2호
• /
• pp.211-216
• /
• 2002

A steel plate-concrete composite slab with pyramidal shear connectors, named TSC composite slab, is expected to have sufficient bending strength and flexural rigidity for loads during and after construction. Fatigue problems play an important role in designing composite slab as bridge decks under traffic conditions. In this paper, a series of fatigue tests was carried out on TSC beam specimens under various loading conditions, in order to evaluate the fatigue strength of TSC composite slabs. The results are as follows : (1) the fatigue failure of TSC composite beams results from the tensile fracture of bottom steel plate and shear connector, and (2) fatigue strength of the steel plate for two million cycles can be estimated to be $1144kgf/cm^2$ from the S-N curves.