• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.114-123
• /
• 2005

A nonlinear speed control of a PMSM using a sequential parameter auto-tuning algorithm for servo equipments is presented. The nonlinear control scheme gives an undesirable output performance under the mismatch of the system parameters and load conditions. Recently, to improve the performance, an adaptive linearization scheme, a sliding mode control and an observer-based technique have been reported. Although a good performance can be obtained, the performance is not satisfactory any more under specific conditions such as a large inertia variation, a fast speed transient or an increased sampling time. The simultaneous estimation of principal parameters giving a direct influence on speed dynamics is generally not simple. To overcome this problem, a a sequential parameter auto-tuning algorithm at start-up is proposed, where dominant parameters are estimated in a prescribed regular sequence based on the method that one parameter is estimated during each interval. The proposed scheme is implemented on a PMSM using DSP TMS320C31 and the effectiveness is verified through simulations and experiments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.81-90
• /
• 2002

This paper presents an Implementation of digital high-performance position sensorless control system of Reluctance Synchronous Motor(RSM) drives with Direct Torque Control(DTC). The system consists of stator flux observer, speed and torque estimator, two digital hysteresis controllers, an optimal switching look-up table, Insulated Gate Bipolar Transistor(IGBT) voltage source inverter, and TMS320C31 DSP board. The stator flux observer Is based on the combined voltage and current model with stator flux feedback adaptive control of which inputs are current and voltage sensed on motor terminal for wide speed range. In order to prove the suggested sensorless control algorithm for industrial field application, we have some simulation and actual experiment at low and high speed range. The developed high-performance speed control by fully digital system are shown a good response characteristic of control results and high performance features using 1.0[kW] RSM having 2.57 reluctance ratio of $L_d/L_q$.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.462-463
• /
• 1996

This study describes the dissipation factor measuring techniques of insulating oil on the operating, transformer by using digital signal processing. After applying voltage to the sensor which is installed in a transformer, acquiring source voltage and current of sensor and using cross-correlation techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and analog filter and software such as fast cross-correlation techniques, rectangular window, and digital filtering techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by computer simulation, and compared the simplified measuring devices with Schering Bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.31-40
• /
• 2019

This paper proposes an adaptive PCIe system for TI C66x DSPs. Conventionally, the PCIe system provided by the C66x is a system dependent on the structure in which the primary core writes an application to the DSP memory through the PCIe interface, then activate the secondary core. Due to the dependency between the cores, when developing a project using a PCIe interface, the remaining cores have to be programmed with a concern of the primary core used as the PCIe interface. Therefore, in order to de-couple the connections among the cores, an adaptive PCIe system is proposed, in the paper, in which the cores operate independently compared to the conventional system. Since the core used as the PCIe interface only runs PCIe related operations in the new system, the remaining cores can be fully utilized without concerning the connections with the core for PCIe interface. In order to verify the feasibility of the proposed adaptive PCIe system, the implementations of LTE-A down link, and IEEE 802.11ac are carried out using the evaluation board which includes a TMS320C6670 chip. Altogether, these results support that we demonstrated that the digital signal processing systems with the PCIe Interface can be developed more rapidly by applying the proposed system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.1
• /
• pp.48-53
• /
• 2000

In this paper, we develop a TMS320C31 (60MHz) digital signal processor (DSP) board to synthesize gradient waveforms for Spiral Scan Imaging (SSI), which is one of the ultra fast magnetic resonance imaging (MRI) methods widely used. In SSI, accurate gradient waveforms are very essential to high quality magnetic resonance images. For this purpose, sampling rate for synthesizing the gradient waveforms is set twice as high as the data sampling rate. With the developed DSP boards accurate gradient waveforms are obtained. Ultra fast spiral scan imaging with the developed with the developed DSP board is currently under development.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.6
• /
• pp.49-56
• /
• 1995

In this study, self-tuning adaptive control using state observer is developed. Self-tuning adaptive controller that estimates the parameters of the system in real time and generates the optimal control signals has robust characteristic about varying load and external disturbances. In addition, state observer without sensors is applied, thus the control can be performed more quickly and exactly. Since chopper is used commonly in practical drives, the characteristics of the chopper are included in state observer algorithm, which, in turn, makes the system exact estimation. Since series type DC motor has nonlinear models, linearizing approach are investigated. to realize the proposed algorithm it requires fast calculation in real time. TMS320C31, digital signal processor, is applied to realized the adaptive control algorithms.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.685-691
• /
• 1993

This paper introduces a PC-based image data processing unit that is composed of preprocessor board and main processor board; The preprocessor contains Inmos A110 processor and efficient H/W architecture for fast mask/logic operations at the speed of video signal rate. It is controlled by the main processor which communicates with the host PC. The main processor board contains TI TMS320C31 digital signal processor, and can access the frame memory of the processor for extra S/W tasks. We test 3*3, 5*5 masks and logic operations on 386/486/DSP and compare the result with that of the proposed unit. The result shows ours are extremely faster than conventional CPU based approach, that is, over several hundred times faster than even DSP.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.64-68
• /
• 1997

In this paper, a controller for the linear motor with high speed and stiffness is implemented using SERCOS interface which is a real time communication protocol between the numerical controller(NC) and the motor driver. The proposed controller is mainly composed of current, speed, and position controller, which are designed using the 32-bit DSP(TMS320C31), a high-integrated logic device (EPM7128), and Intelligent Power Module(IPM) to enhance reliability and compactness of the system. The experimental results show the effective performance of the proposed controller for he linear motor with high speed and stiffness.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.174-176
• /
• 2000

In this paper, a high speed distance relay, using a digital signal processor(DSP) is presented. The idea of the protective algorithm is based on the least square method using minimum data window to minimize the relay operating time. A new disign concept for a low-pass filter is proposed. This analog low pass filter has minimum transient response time. The main processor of the relay is TMS320C31. According to a series of real time tests, the proposed protective relay shows reliable and fast operating characteristics.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.167-169
• /
• 2001

In this paper, a controller design for high speed and stiffness linear motor is implemented. The designed controller is mainly composed of speed and current controller, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented by using 32-bit DSP(TMS320C31), a high-integrated logic device(EPM7128), and IPM(Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for high speed and stiffness linear motor.