• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.308-313
• /
• 2003

Thermal mass flow meters (TMFMs) are most widely used for measuring mass flow rates in the semiconductor industry. A TMFM should have a short response time in order to measure the time-varying flow rate rapidly and accurately. Therefore it is important to study transient heat transfer phenomena in the sensor tube of a TMFM that is the most critical part in the TMFM. In the present work, a simple numerical model for transient heat transfer phenomena of the sensor tube of a TMFM is presented. Numerical solutions for the tube and fluid temperatures in a transient state are obtained using the proposed model and compared with experimental results to validate the proposed model. Based on numerical solutions, heat transfer mechanism in a transient state in the sensor tube is explained. Finally, a correlation for predicting the response time of a sensor tube is presented. The correlation is verified by experimental results.

• Geomechanics and Engineering
• /
• 제37권2호
• /
• pp.179-187
• /
• 2024

In this paper, a unified time-dependent constitutive model of Darcy flow and non-Darcy flow is proposed. The influencing factors of flow velocity are discussed, which demonstrates that permeability coefficient is the most significant factor. Based on this, the dynamic evolution characteristics of water inrush during tunneling through fault fracture zone is analyzed under the constant permeability coefficient condition (CPCC). It indicates that the curves of flow velocity and hydrostatic pressure can be divided into typical three stages: approximate high-velocity zone inside the fault fracture zone, velocity-rising zone near the tunnel excavation face and attenuation-low velocity zone in the tunnel. Furthermore, given the variation of permeability coefficient of the fault fracture zone with depth and time, the dynamic evolution of water flow in the fault fracture zone under the variable permeability coefficient condition (VPCC) is also studied. The results show that the time-related factor (α) affects the dynamic evolution distribution of flow velocity with time, the depth-related factor (A) is the key factor to the dynamic evolution of hydrostatic pressure.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.118-122
• /
• 1999

Thermal mass flow meter was developed using principle of convective heat transfer. The advantage of thermal mass flow meter is measuring mass flow directly, therefore, it is not required to use densitometer or temperature/pressure and DP gages. The final accuracy of this thermal mass flow meter is $\pm1.0{\%}$ or better, reproducibility is $\pm0.2{\%}$, and the response time is 600 ms. The thermal mass flow meter was developed from a single point to multi-points (maximum is 9 points), and the number of points is determined according to desired accuracy and size of piping/duct. Since this thermal mass flow meter adopted microprocessor based design, it is intrinsically accurate, self-error detectable, and has self-diagnosis function. The applications of this thermal mass flow meter are for measurement and control of HVAC air flow, other gas flow, and liquid flow.

• Management Science and Financial Engineering
• /
• 제15권1호
• /
• pp.71-79
• /
• 2009

This paper considers the two kinds of integer multicommodity flow problems, a feasibility problem and a maximization problem, on two types of directed cycles, a unidirectional and a bidirectional cycle. Both multicommodity flow problems on an undirected cycle have been dealt with by many researchers and it is known that each problems can be solved by a polynomial time algorithm. However, we don't find any result on the directed cycles. Here we show that we can also solve both problems for a unidirectional and a bidirectional cycle in polynomial time.

• 한국환경과학회지
• /
• 제24권4호
• /
• pp.481-494
• /
• 2015

Groundwater level hydrographs from observation wells in Jeju island clearly illustrate distinctive features of recharge showing the time-delaying and dispersive process, mainly affected by the thickness and hydrogeologic properties of the unsaturated zone. Most groundwater flow models have limitations on delineating temporal variation of recharge, although it is a major component of the groundwater flow system. Recently, a convolution model was suggested as a mathematical technique to generate time series of recharge that incorporated the time-delaying and dispersive process. A groundwater flow model was developed to simulate transient groundwater level fluctuations in Pyoseon area of Jeju island. The model used the convolution technique to simulate temporal variations of groundwater levels. By making a series of trial-and-error adjustments, transient model calibration was conducted for various input parameters of both the groundwater flow model and the convolution model. The calibrated model could simulate water level fluctuations closely coinciding with measurements from 8 observation wells in the model area. Consequently, it is expected that, in transient groundwater flow models, the convolution technique can be effectively used to generate a time series of recharge.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.232-237
• /
• 1998

This paper describes a new method for estimating time-to-collision which exhibits high tolerance to noise contained in camera images. Time to collision (TTC) is one of the most important parameters available from a camera attached to a mobile machine. TTC indirectly stands far the translation speed of the camera and is usually calculated either from successive images or optical flow by using intimate relationship between TTC and flow divergence. In most cases, however, it is not easy to get accurate optical flow, which makes it difficult to calculate TTC. In this study it is proved that if the target has a smooth surface, the average of divergence over any point-symmetric region on the image is equal to the divergence of the center of the region. It means that required divergence can be calculated by integrating optical flow vectors over a symmetric region. It is expected that in the process of the integration, accidental noise is canceled if they are independent of optical flow and the motion of the camera. Experimental results show that TTC can be estimated regardless of the surface condition. It is also shown that influence of noise is eliminated as the area of integration increases.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제26권2호
• /
• pp.108-120
• /
• 2022

We considered qualitative behaviour of the generalization of Einstein's model of Brownian motion when the key parameter of the time interval of free jump degenerates. Fluids will be characterised by number of particles per unit volume (density of fluid) at point of observation. Degeneration of the phenomenon manifests in two scenarios: a) flow of the fluid, which is highly dispersing like a non-dense gas and b) flow of fluid far away from the source of flow, when the velocity of the flow is incomparably smaller than the gradient of the density. First, we will show that both types of flows can be modeled using the Einstein paradigm. We will investigate the question: What features will particle flow exhibit if the time interval of the free jump is inverse proportional to the density and its gradient ? We will show that in this scenario, the flow exhibits localization property, namely: if at some moment of time t₀ in the region, the gradient of the density or density itself is equal to zero, then for some T during time interval [t₀, t₀ + T] there is no flow in the region. This directly links to Barenblatt's finite speed of propagation property for the degenerate equation. The method of the proof is very different from Barenblatt's method and based on the application of Ladyzhenskaya - De Giorgi iterative scheme and Vespri - Tedeev technique. From PDE point of view it assumed that solution exists in appropriate Sobolev type of space.

• 한국ITS학회 논문지
• /
• 제21권2호
• /
• pp.17-32
• /
• 2022

본 연구에서는 개별 차량의 차두 시간(time headway) 정보를 활용하여 고속도로 환경에서의 단일 링크에 대한 교통류 모형(flow-density diagram)을 추정하는 방법에 대해 탐구한다. 차두 시간 기반 교통류 모형(empirical flow-density diagram) 연구를 위해 차량용 비전 센서가 탑재된 실험 차량에서 9개월동안 수집된 데이터의 전처리 및 GIS 기반 맵 매칭을 수행한다. 기존의 교통류 모델식을 활용한 차두 시간 기반 교통류 모형(empirical flow-density diagram)의 검증을 위해, 차량 검지기 기반의 VDS(Vehicle Detection System) 데이터(loop detection traffic data) 기반 교통류 모형과 결과 비교 및 분석을 수행한다. 차두 시간 기반 교통류 모형의 추정 오차 원인을 분석하기 위해 각 교통류 모형의 차두 시간 및 차두 거리의 확률분포와 단위시간 교통량과 차량 밀도의 표준편차를 활용하였다. 분석 결과 링크 내 제한된 샘플 차량 대수 및 수집 데이터에 대한 주행환경 편향성이 추정 오차의 주된 요인이며. 이에 따른 추정 오차 개선을 위한 방법에 대해 제안한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.181-182
• /
• 2003

A preconditioned numerical method for gas-liquid to-phase flow is applied to solve cavitating flow. The present method employs a density based finite-difference method of dual time-stepping integration procedure and Roe's flux difference splitting approximation with MUSCL-TVD scheme. A homogeneous equilibrium cavitation model is used. The method permits simple treatment of the whole gas-liquid two-phase flow field including wave propagation, large density changes and incompressible flow characteristics at low Mach number. By this method, two-dimensional internal flows through a venturi tuve and decelerating cascades are computed and discussed.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1638-1644
• /
• 2005

This paper suggests fur the study on a fluid velocity measuring system using ultrasonic transducer. In general, the time difference method to measure the distance between transducers has been known. In this paper, the practical technology for manufacturing ultrasonic flow meter system is studied using the time difference method. The ultrasonic transducer was designed and manufactured. The transmission and receiving algorithm for ultrasonic signal was studied. The ultrasonic flow measuring system was experimented in laboratory using a water reservoir for verifying the distance measuring accuracy. Finally, it was tested in flow calibration laboratory for the velocity measuring performance. The system, designed in this study, showed 0.3 mm resolution in distance measurement. For precise flow measurement, a high speed triggering algorithm is required for ultrasonic signal receiving.