• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.78-84
• /
• 2011

In this paper, the switching frequency and THD for the reduction instead of traditional single phase inverter using a new type of central arm of the single phase inverter is proposed. The proposed single phase inverter topology, the existing one to add a arm by two-way central switch 3-level output voltage can be raised and, central arm, especially one or two of the switches by using a switch to the diode current switching algorithm was simplified. During the dead time because of this, depending on the direction of the current level does not appear in any other existing level compared to the inverter output voltage level of the THD has the advantage that less can be. The simulation and experimental results verified the validity of the proposed topology.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.490-493
• /
• 2005

In order to reduce the harmonics in invertor output of the DVR system, typically LC filter is employed. In designing the LC filter, it is required to consider the gild impedance and the characteristic of the harmonics. In this paper, problems in the conventional way of designing the LC filter is analyzed and new LC fitter design technique is proposed. In the proposed technique, parameters of the LC filter are calculated considering grid impedance, THD, DC link voltage and phase lag. The validity and feasibility of the proposed method is verified through the simulations experiments. The DVR system with the proposed LC filter is being built and tested.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.358-359
• /
• 2013

LED는 우수한 특성으로 인하여 차세대 조명으로 각광받고 있지만, 높은 비용에 따른 시장 활성화가 더딘 상태로서 저가격화 노력이 꾸준히 이루어지고 있다. 현재는 LED조명을 구동하기 위한 정전류 Driver, AC-DC컨버터를 배제시킬 수 있도록 AC 입력으로 LED를 구동하는 기술이 선보이고 있지만, AC성분 특성상 낮은 효율과 역률, 높은 THD의 문제점을 가지고 있다. 본 논문에서는 직렬 콘덴서를 통해 AC 입력전압으로 LED를 구동하는 방식에서 입출력변동에 따른 정전류 제어와 높은 THD를 개선하기 위한 스위칭 기법을 제안하였고, 이러한 회로의 용량성 역률을 보상하기 위하여 유도성 부하인 방전램프(고압나트륨램프)와 결합을 통한 역률을 보상하는 하이브리드 조명회로를 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1605-1607
• /
• 2000

In this paper, the design of class AB BiCMOS log-domain filter for low-voltage and low-power was proposed. This filter is consist of a log-domain integrator using folded junctions with capacitor connected to emitter and it's class AB structure. A comparison between the proposed class AB BiCMOS log-domain filter and classical class A BiCMOS log-domain filter is drawn on the basis of SNR, THD and the frequency response. This comparison shows proposed filter are more than good SNR, THD and frequency characteristics than more class A log-domain filter for low voltage and low power.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.181-182
• /
• 2007

Wireless home theater and speaker system was designed. That has 20W output per channel, 0.1% THD (Total Harmonic Distortion) and automatic algorithm avoiding noise. The 3D stereophonic sound was realized through the wireless 5.1channel speaker system designed. That could be secured 0.4% improvement effect of THD compared with wire speaker systems. Specially in transfer sound with wireless, Frequency Hopping Spread Spectrum was superior than Direct Sequence Spread Spectrum in household electric appliances and wireless internet environment that radiated noise similar with ISM Band using 2.4GHz.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.1
• /
• pp.77-83
• /
• 2012

In this paper, an optimal solution to the harmonic reduction problem in a cascaded multilevel inverter with non-equal DC sources using a genetic algorithm (GA) is presented. Switching angles are generated for different values of modulation index by the proposed algorithm, considering minimum voltage total harmonic distortion (THD) whereas selected harmonics are controlled within the allowable limits at all desired modulation indices including the point of discontinuity. Results are stored as a look-up table to be used to control the inverter for a certain operating point. The computed angles are used in a simulated circuit in Matlab\Simulink to validate the results.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.35-41
• /
• 2007

This paper presents the results of investigating harmonic levels on medium voltage motors at loading conditions in air separation plant. The essential results of the measurements of the medium voltage motor harmonics are summarized in the values for the total harmonic distortion (THD). Motors loading case is used to assess the current and voltage harmonic distortions. Proper system analysis is important when adding a new motor starting and controlling the equipment. With the result of the paper it is possible to suggest the most appropriate starting and control method. Two medium voltage motors of air separation unit measurement results and simulations are summarized. Both current and voltage harmonic distortions are fitted by using a linear and exponential regression model. The prediction of THD values can be used for this kind of process for future planning by utilities.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1154-1157
• /
• 2004

This paper presents design of a class D Amplifier using multi-level switching and Zero-Voltage-Switching(ZVS) technique. The amplifier circuit features zero voltage switching at all switches of the circuit and multi-level switching operation so that the higher efficiency and lower THD could be achieved. A 50-W prototype D class amplifier built and tested it. As a result, the maximum efficiency of $96\%$ and the THD of under $60\%$ were obtained.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.8
• /
• pp.373-378
• /
• 2001

This paper introduces a new online index to quantify the harmonic distortion. The proposed index based on VI product can represent the harmonic distortion of both voltage and current, and it includes the effect of interharmonic distortion. Also, the new index is suitable to online harmonic distortion evaluation since it only requires the r.m.s. (root mean square) value and fundamental frequency value of the signals. Case studies are presented to show the availability of the proposed index using the comparison with the THD (Total Harmonic Distortion).

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.173-181
• /
• 2016

In this paper, a new technique for harmonic optimization in cascaded H-bridge 7-level inverters is proposed. The suggested strategy is based on minimizing an objective function which simultaneously optimizes the converter utilization and Total Harmonic Distortion (THD). The Switch Utilization Ratio (SUR) is formulized for both the phase and line-line voltages of a 7-level inverter and is considered in the final objective functions. Based upon the SUR formula, utilization ratio enhancement will reduce the value of feeding DC links, which improves the efficiency and lifetime of the circuit components due to lower voltage stresses and losses. In order to achieve more effective solution in different modulation indices, it is assumed that the DC sources can be altered. Experimental validation is presented based on a three-phase 7-level inverter prototype.