• 한국자동차공학회논문집
• /
• 제2권1호
• /
• pp.73-83
• /
• 1994

Press formabilities of aluminum sheets for automobile body were investigated. Plane strain stretching test (called RIST-PSST), cupping test and U bending test were performed to assess the press formability of aluminum sheets respectively. The results showed that aluminum sheets are generally inferior to cold-rolled steel sheet of deep drawing quality (CSP3N) in press formability. The limiting punch height (LPH) and limiting plane strain (FLCo) of aluminum sheets are 50%-70% level compared to that of CSP3N. Moreover, the limiting drawing ratios(LDR) of aluminum sheets are ranged between 1.95 and 2.1. The poor press formability of aluminum sheets is responsible for low values of total elongation and plastic anisotropy parameter in tensile characteristic. The shape fixability of aluminum sheets evaluated in U bending test is very poor due to its low elastic modulus compared to CSP3N.

• 대한전자공학회논문지SD
• /
• 제41권11호
• /
• pp.69-77
• /
• 2004

본 논문에서는 ground bounce 영향과 지연고장 검출을 함께 고려한 효율적인 보드레벨 연결선 테스트 생성 알고리즘을 제안한다. 제안된 알고리즘은 IEEE 1149.1의 연결선 테스트, ground bounce 영향에 의한 바운더리 스캔의 오동작 방지, 그리고 연결선의 지연고장 검출 능력을 포함한다. 본 논문에서 제안하는 기법은 기존의 기법에 비해 연결선의 지연고장 검출능력을 새롭게 추가하였지만, 연결선 테스트에 필요한 총 테스트 패턴 수는 기존의 기법과 비교해서 큰 차이를 보이지 않음을 실험결과에서 확인할 수 있다.

• 한국가정과교육학회지
• /
• 제7권1호
• /
• pp.1-10
• /
• 1995

This study was intended to provide an improved method for testing textiles in high school. Four kinds of test subjects were selected and applied to the classes. Problems of the methods in the textbooks were corrected as follows: 1)Burning test: The number of specimen is reduced to 3 kinds of fibers(cotton, wool, and polyester) and recommends are given to make result by comparing with the burning characteris-tics of paper and hair. 2) Absorbency test: Test Method is changed to drop test. The result is recorded by measuring time required for the water drops absorbed to the specimen. 3) Wrinkle recovery test: A glass is provided instead of metal weight. The method of measuring angle which is made by the specimen is shown in figure. 4) Effects of Detergent: 0.2% of detergent solution is provided before class. The amount of oil and carbon black is specified. Students have generally agreed that the improved methods were better than those in the text-books after they made the above 4 recommendable experiments(p<.001)

• Communications for Statistical Applications and Methods
• /
• 제8권1호
• /
• pp.159-171
• /
• 2001

Shapiro and Wilk (1972) developed a test for exponentiality with origin and scale unknown. The procedure consists of comparing the generalized least squares estimate of scale with the estimate of scale given by the sample variance. However the test statistic is inconsistent ; that is, the power of the test will not approach 1 as the sample size increases. Hence we give a test based on the ratio of two asymptotically efficient estimates of scale. We also have conducted a power study to compare the test procedures, using Monte Carlo samples from a wide range of alternatives. It is found that the suggested statistics have higher power for the alternatives with the coefficient of variation greater that or equal to 1.

• 한국임상수의학회지
• /
• 제1권1호
• /
• pp.41-47
• /
• 1984

The author carried out bovine mastitis test by California Mastitis test(CMT) for the milk from dairy cows in the surburbs of Taejeon. In order to select prefer commercial therapeutic antibacterial agents for mastitis treatment, Staphylococcus aureus were isolated from the CMT positive milk and the strains were tested for the tolerance test to the agents. The results obtained were summarized as follows : 1. The tolerance test appeared graduate tolerance in cases with continuously repeat of therapeutic agents. 2. The antibacterial agents revealed strong tolerance were D-and E-ointments. 3. The antibacterial agents revealed suspect tolerance were A-and F-ointments and ampicillin, penicillin, kanamycin and streptomycin. 4. The antibacterial agents revealed non or rare tolerance were B-and G-ointments and chloramphenicol, erythromycin and oxytetracycline. 5, It is concluded that the use of 3-day-interval in turn with antibacterial agents selected by tolerance test may be beneficial.

• 한국수학교육학회지시리즈D:수학교육연구
• /
• 제15권1호
• /
• pp.69-79
• /
• 2011

Based on the work of Haylock (cf [Haylock, D. W. (1987). A framework for assessing mathematical creativity in schoolchildren. Educ. Stud. Math. 18(1),59-74]) a mathematical creativity test containing items of two categories overcoming fixation and divergent thinking has been developed for Bengali medium school students with sample size 262. The items measuring divergent thinking are found highly internally consistent and there is a significant correlation between overcoming fixation and divergent thinking. Study of the factorial validity of the test by Thursstone's centroid method gives satisfactory result. Validity coefficient of the test with teachers' rating, alpha reliability and test-retest reliability of the test are also found satisfactory.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.35.2-35.2
• /
• 2011

A wind turbine power performance test is very important to wind turbine manufacturers because a wind farm developer or planner must want to define power performance characteristics and reliability of new wind turbines. Based on the IEC 61400-12-1, A wind turbine test site has to be nicely installed at flat terrain for testing. We are developing the wind power system which is IEC wind class IIa model with rated power of 3MW. KEPCO's Gochang power testing center was considered as candidates to build the test site without site calibration. This paper aims to verify the validity of the test site by using implement site assessment result that was based on IEC 61400-12-1.

• 한국안전학회지
• /
• 제33권4호
• /
• pp.15-20
• /
• 2018

In this study, we have performed the Cone Calorimeter test and Smoke density test in accordance with ISO 5660-1 and ASTM E662 respectively to check the smoke production characteristics of rubber flooring materials for railway vehicle. Early in the ASTM E662 test, more smoke was produced in the flame mode test than non-flame mode test, but later more smoke was produced in non-flame mode test. The correlation($R^2$) between TSR(Total Smoke Release) by ISO 5660-1 and Ds(Specific Optical Density) by ASTM E662 Flame mode was 0.782. The $R^2$ between TSR by ISO 5660-1 and Ds by ASTM E662 Non-flame was 0.930.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.15-20
• /
• 2001

This paper presents the experimental study of the static stiffness for the BT shank(7/24 long taper) and the HSK tool shank(1/10 short taper) in the main spindle taper of machine tool. The static stif71ess test was performed under different experimental conditions. It is turned out that the effective axial drawing force is larger than 6kN in the 7/24 test tool shank and BkN in the 1/10 test tool shank. As a test result, considering that the actual drawing force of the machining center is about 1300k2f and axal drawing force 12kN is equivalent amount as a 1220kgf, it is turned out that 1/10 test tool shank superior to 7/24 test tool shank in the static stiffness.

• 항공우주기술
• /
• 제4권2호
• /
• pp.50-59
• /
• 2005

본 연구에서는 개발된 테일팬 1차 시제품의 성능시험에 대한 것이다. 한국항공우주연구원에서는 헬리콥터용 반 토오크 시스템으로 테일팬 시스템을 개발하였으며, 제작된 1차 시제품의 성능시험을 위해 테일팬 성능시험장치를 제작하였다. 테일팬 성능시험을 위해 먼저 시험장치에 대한 제작 검증용 시험을 수행하였고, 다음으로 팬블레이드와 시험장치의 고유진동수를 확인하였다. 성능 시험용 시험장치 운용회전수를 결정하기 위한 운용시험을 수행하였다. 테일기어박스(TGB)에 가속도계를 부착하여 단계적으로 회전수와 부착물들을 변화시켜가며 고유진동수와 진동 레벨을 확인하였다. 운용시험 결과로부터 테일팬 성능시험용 시험장치 운용회전수를 결정하였고, 무풍조건과 비행 조건에 따른 성능시험을 수행하였다. 측정된 데이터는 무차원화하여 분석하였고, 이 결과로 개발 시제품이 성능 요구조건을 만족시킴을 확인할 수 있었다.