• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.3
• /
• pp.124-128
• /
• 2011

Electrospun webs have been widely investigated for applying to drug delivery system (DDS) because of their high specific surface area and high porosity. In this study, the composite webs of PLA (poly(lactic acid)) and $TiO_2$ were fabricated by melt-electro-spinning method for applying to drug delivery system. The morphologies of PLA/$TiO_2$, webs were observed using scanning electron microscope (SEM) and field emission transmission electron microscope (FE-TEM). The crystal structures of PLA/$TiO_2$ composite webs were confirmed by X-ray diffractometer (XRD).

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.5
• /
• pp.207-212
• /
• 2014

An ultrathin sheet-like carbon nanostructure provides an important model of a two-dimensional graphite structure with strong anisotropy in physical properties. As an easy and cheap route for mass production, RF thermal plasma synthesis of freestanding carbon nanosheet from $CH_4$ (Methane) and $C_3H_8$ (Propane) is presented. Using vapor synthesis process with RF inductively thermal plasma, carbon nanosheets were obtained without catalysts and substrates. The synthesized carbon nanosheets were characterized using transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET) analysis. The carbon nanosheets synthesized using methane and propane generally showed 5~6 and 15~16 layers with a wrinkled morphology and size of approximately 100 nm.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.670-676
• /
• 2004

The synthesis of highly concentrated silver nano sol assisted by polymeric dispersant (polyelectrolytes) for inkjet method was studied. The silver nano sol was prepared with AgNO$_3$, polyelectrolytes (HS5468cf ; polyacrylic ammonium salt), and reducing agent. The polyelectrolytes play an important role in formation of complex composed of Ag$\^$+/ion and carboxyl group (COO$\^$-/), result in preparation of highly dispersed silver nano particles. The optimization of added amount of polyelectrolytes, and concentration of silver nano sol was studied. The silver nanoparticles were evaluated by XRD, particle size/zeta potential analyzer and FE-TEM. The silver nanoparticles with the range of 10 nm in diameter were produced. The concentration of batch-synthesized silver nano sol was possible up to 40 wt%.

• Journal of the Korean Electrochemical Society
• /
• v.14 no.2
• /
• pp.77-82
• /
• 2011

The surface of $Li[Ni_{0.35}Co_{0.3}Mn_{0.35}]O_2$ cathode was modified by $[Li,La]TiO_3$ coating using pH controlled coating solution. At low pH values (acidic solution), cathode powders, which is oxides, have a positive surface charge, whereas, they have a negative surface charge at high pH values. As a result, their charge could affect the formation of the coating layer on the surface of cathode powder. To determine the optimal pH value, the surface coating of the pristine powder was carried out at various pH values of the coating solution. The surface morphology of coated samples was characterization by SEM and TEM analyses. Impedance analysis and cyclic voltammogram presented that internal resistance of the cell was dependent upon the pH of coating solution.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.5
• /
• pp.229-233
• /
• 2002

Nano-sized ZnO particles were successfully synthesized at low temperatures by a polymerized complex method via an organochemical route. The polymeric precursors could be prepared using Zn nitrate hexahydrate and a mixed solution of citric acid and ethylene glycol as a chelating agent and a reaction medium. The polymeric precursors were calcined at temperatures from 300 to $700^{\circ}C$ for 3 h, and evaluated for degree of crystallization process, thermal decomposition, surface morphology and crystallite size. The thermal decomposition and crystallization process were analyzed by TG-DTA, FI-IR and XRD. The morphology and crystallite size of the calcined particles were evaluated by scanning electron microscopy (SEM), transmittance electron microscopy (TEM) and Scherrer's equation. Crystallization of the ZnO particles was detected at $300^{\circ}C$ and entirely completed above $400^{\circ}C$. Particles calcined between 400 and $700^{\circ}C$ showed a uniform size distribution with a round shape. The average particle sizes calcined at $400^{\circ}C$ for 3 hour were 30~40nm showing an ordinary tendency to increase with the temperatures.

• Journal of Dairy Science and Biotechnology
• /
• v.36 no.3
• /
• pp.164-170
• /
• 2018

The objectives of this study were to manufacture casein phosphopeptide (CPP)/chitosan oligosaccharide (CSO) nanocomplexes and to investigate the impacts of manufacturing variables, such as CPP concentration and pH, on their morphological and physicochemical characteristics. Transmission electron microscopy (TEM) and particle size analysis were used to assess the morphological and physicochemical properties of the CPP/CSO nano-complexes, respectively. Based on the images obtained by TEM, the spherical shapes of the CPP/CSO nanocomplexes ranged from 50 to 150 nm. As the concentration of CPP was increased and the pH was decreased, the average particle size of the nanocomplexes significantly (p<0.05) increased. The CPP/CSO nanocomplexes had a highly uniform distribution with a polydispersity index value of less than 0.3. In addition, they had a negative surface charge with a zeta-potential value between -17 and -26 mV. The CPP/CSO nanocomplexes showed good stability during the freeze-drying process. In conclusion, CPP/CSO nanocomplexes were successfully manufactured, and the CPP concentration and pH were found to be key factors that affected their morphological and physicochemical properties.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.1
• /
• pp.31-39
• /
• 1999

In the present study, oxidation behavior of 304 and 316 stainless steels was investigated. After solution treatment, specimens were polished up to $1{\mu}m$ $Al_2O_3$ grade and then subjected to oxidation treatment in dry air. The range of temperature was used for oxidation treatment at $300^{\circ}C{\sim}500^{\circ}C$ and TEM was used for analyzing the components and structure of oxide film. Also, these results were compared with the results of ESCA and TG. According to the results of TEM analysis, it was found that Cr oxide film was formed on top of the surface after room temperature oxidation but amorphous Fe oxide was formed on top of the surface and polycrystalline $(Cr,Fe)_2O_3$ was formed below the amorphous Fe oxide layer after $500^{\circ}C$ oxidation treatment. The oxidized specimens at $500^{\circ}C$ showed that 316 stainless steel resists more strongly to grain and grain boundary oxidation than 304 stainless steel. These results suggested that Mo component resolved in 316 stainless steel matrix suppressed the formation of Cr carbide which may results in local Cr deplete area.

• Korean Journal of Animal Reproduction
• /
• v.22 no.4
• /
• pp.331-339
• /
• 1998

The purpose of this study was to investigate the applicability of periodic acid thiocarbohy-drazide silver proteinate, physical development (PA-TCH-SP, -PD) stain to the seminiferous tubules for the ultrastructural studies of Sertoli cell column and Sertoli cell processes. In the Sertoli cell cloumn and Sertoli cell processes, high concentration of the reactive granules were observed under transmission electronmicroscope (TEM) after PA-TCH-SP-PD stain. Also some reactive granules were seen in the spermatogonium cytoplasm, clearly. These reactive granules specifically stained with PA-TCH-SP, -PD make the Sertoli cell column, Sertoli cell processes and spermatogonium cytoplasm easy to distinguish from nucleus of the germ cells, spermatocyte, spermatid and residual body which did not contain the reactive granules. This result indicates that the PA-TCH-SP, -PD stain is superior to other traditional electronic double stain methods for the ultrastructural studies of Sertoli cell.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.254-263
• /
• 1998

A worker employed in a serpentine mine was found developed mesothelioma as the first case of Korea in 1997. Asbestos was known as a causative agent for mesothelioma. Thus, asbestos contamination in mines could be a big health threat to those workers who were unknowingly exposed. However, there was no report that any minerals found in Korea contained asbestos. This study was carried out to find the presence of any asbestiform fibers in minerals which could be obtained in Korean mines. We examined fifteen minerals from 44 mines which were suspected contaminated with asbestiform fibers. Asbestiform analysis was done with high resolution transmission electron microscope(TEM), with energy dispersive X-ray spectroscope(EDX) and X-ray diffraction(XRD) analyses. Among asbestiform fibers, chrysotile was found in chrysotile, serpentine, talc and pyrophylite specimens from 11 mines. Tremolite was found in tremolite and talc specimens from three mines. Mordenite was found in zeolite specimens from two mines. Wallastonite and sepiolite were found in wallastonite and sepiolite specimens respectively. Crocidolite, antigorite and actinolite were found from talc specimens. But no asbestiform fiber contaminants were found in doromite, vermiculite, limestone, marble, gypsum, kaolin, and clary specimens. Thus, these asbestiform fibers such as such as chrysotile, tremolite, mordenite, crocidolite, antigorite and actinolite could be the responsible agents for the health hazards such as mesothelioma and other cancers.

• Journal of Welding and Joining
• /
• v.33 no.2
• /
• pp.8-13
• /
• 2015

This study was carried out to evaluate mechanical properties of the jointed Al6061/HT590 alloys by friction stir welding (FSW). FSW was conducted under the conditions with tool rotating speed of 500 RPM and traveling speed of 300 mm/min., where Ar gas was introduced to prevent the materials from corrosion during the welding process. Electron back-scattering diffraction (EBSD) was used to characterize microstructures such as grain size, misorientation angle and crystal orientation. Evolution of intermetallic compounds in Al6061 during the process were examined in terms of morphology, size and aspect ratio at three distinct zones Al base material, heat affected zone and stir zone, where transmission electron microscope (TEM) was used. It was revealed that FSW gave rise to refinement of grains as well as growth of intermetallic compounds in Al6061. The morphological changes of intermetallic compounds exerted an influence on mechanical properties, resulting in occurrence of fracture in the part of the base material instead of the jointed parts (heat affected zone and stir zone). This study systematically evaluated the microstructural evolutions during the FSW for joining Al6061 with HT590 and their effect on mechanical properties.