Browse > Article
http://dx.doi.org/10.5781/JWJ.2015.33.2.8

Evaluation of mechanical properties on friction stir lap jointed Al6061/HT590 alloys  

Kim, Eun-Hye (Non-Ferrous and Components R&BD Gangwon Regional Division, Korea Institute of Industrial Technology)
Lee, Kwang-Jin (Convergence Components & Agricultural Machinery Application Group, Jeonbuk Regional Division, Korea Institute of Industrial Technology)
Song, Kuk-Hyun (Non-Ferrous and Components R&BD Gangwon Regional Division, Korea Institute of Industrial Technology)
Publication Information
Journal of Welding and Joining / v.33, no.2, 2015 , pp. 8-13 More about this Journal
Abstract
This study was carried out to evaluate mechanical properties of the jointed Al6061/HT590 alloys by friction stir welding (FSW). FSW was conducted under the conditions with tool rotating speed of 500 RPM and traveling speed of 300 mm/min., where Ar gas was introduced to prevent the materials from corrosion during the welding process. Electron back-scattering diffraction (EBSD) was used to characterize microstructures such as grain size, misorientation angle and crystal orientation. Evolution of intermetallic compounds in Al6061 during the process were examined in terms of morphology, size and aspect ratio at three distinct zones Al base material, heat affected zone and stir zone, where transmission electron microscope (TEM) was used. It was revealed that FSW gave rise to refinement of grains as well as growth of intermetallic compounds in Al6061. The morphological changes of intermetallic compounds exerted an influence on mechanical properties, resulting in occurrence of fracture in the part of the base material instead of the jointed parts (heat affected zone and stir zone). This study systematically evaluated the microstructural evolutions during the FSW for joining Al6061 with HT590 and their effect on mechanical properties.
Keywords
Friction stir lap joint; Al6061/HT590; Microstructure; Electron back-scattering diffraction (EBSD); Transmission electron microscope (TEM); Mechanical properties;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 H.S. Bang, H.J. Kim, M.S. Go, and W.S. Chang, A Study on the Mechanical Characteristic in Al 6061 Alloys welded by Friction Stir Welding, Journal of KWJS, 20 (2002), 105-108, 6 (in Korean)
2 P. M. G. P. Moreira, M. A. V. de Figueiredo, and P. M. S. T. de Castro, "Fatigue behaviour of FSW and MIG weldments for two aluminium alloys, Theoretical and Applied Fracture Mechanics, 48(2007), 169-177, 10   DOI   ScienceOn
3 C. J. Dawes, Introduction to friction stir welding and its development, Welding and Metal Fabrication, 63(1995)
4 Y.B. Ko, J.H. Lee and K.C. Park, Microstructures of Friction Stir Lap Welded in A5052-H112 Alloy, Journal of KWJS, 27(2009), 17-24, 12 (in Korean)
5 C. M. Chen and R. Kovacevic, Joining of Al 6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding, International Journal of Machine Tools and Manufacture, 44(2004), 1205-1214, 9   DOI   ScienceOn
6 T. Watanabe, H. Takayama, and A. Yanagisawa, Joining of aluminum alloy to steel by friction stir welding, Journal of Materials Processing Technology, 178 (2006), 342-349, 9   DOI   ScienceOn
7 Y.S. Sato, S.H.C. Park, M. Michiuchi and H. Kokawa, "Constitutional Liquation during dissimilar friction stir welding of Al and Mg Alloys," Scripta Materm 50 (2004)
8 R. S. Mishra and M. W. Mahoney, "Friction stir welding and processing," ASM Int, (2007)
9 R.S. Mishra and Z.Y. Ma, "Friction stir welding and processing," Mater. Sci. Eng. R, 50(2005)
10 Y.S. Sato, M. Urata, H. Kokawa, K. Ikeda, "Hall-petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys," Mater. Sci. Eng. A, l. 354(1) (2003)
11 W.B. Lee, Y.M. Yeon, and S.B. Jung, "echanical Properties Related to Microstructural Variation of 6061 Al Alloy Joints by Friction Stir Welding," ATERIALS TRANSACTIONS, 45(2004), 1700-1705   DOI   ScienceOn