• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.3-9
• /
• 1991

Validity and limitation of conventional methods for analyzing the characteristics of nonuniform transmission lines are discussed here. It is found that uniqueness of cal- culated input impedance of an exponential transmission line by employing conventional methods is not assured in general but only under secific conditions. And the calculated input impedance of an angled two-plane transmission line based on the conventional planar TEM mode devices from its rigorous solution.

• Applied Microscopy
• /
• v.48 no.1
• /
• pp.1-5
• /
• 2018

Cryo-transmission electron microscopy (cryo-TEM) allows us to perform structural analysis of a analyses of large protein complexes, which are difficult to analyze using X-ray crystallography or nuclear magnetic resonance. The most common examples of proteins used are ribosomes and proteasomes. In this paper, we briefly describe the advantage of cryo-TEM and the process of two-dimensional classification by considering a human proteasome as an example.

• Electrical & Electronic Materials
• /
• v.8 no.4
• /
• pp.464-471
• /
• 1995

메그네트론 스퍼터링으로 제작한 고밀도 다층박막($Co_75{{Pt_12}{Cr_13}}$합금) 디스크를 투과전자현미경을 이용해 단면 및 평면의 미세조직의 조사 혹은 미소부위 성분분석을 할 경우, 선행되어야하는 시편준비 경로와 각 단계별 구체적방법 및 그 효과를 연구하였다. Ion밀링시간이 증가함에 따라 시료가 얇게 되는과정에서 스퍼터링된 물질이 관찰될 시편부위의 다른 표면에 증착되므로써 미세조직의 선명도를 해칠 수 있고, 이로인한 해석상의 오류가능성이 시사되었다. 또한, 자기박막 디스크와 같이 다층으로 구성된 단면분석용 시료에서는 서로 맞붙인 실리콘 단결정 접착면을 따라 밀링속도가 선택적으로 커서 우선축이 생김으로써 양질의 시편을 얻기 어려운 문제점이 제기되었다. 이같은 문제를 포함한 전자현미경 시료준비과정에서 생길 수 있는 문제를 해결할 수 있는 실마리와 이를 이용해 수행한 전자현미경 분석결과 및 효과적인 시편준비방법이 본 논문에서 언급되었다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.1
• /
• pp.44-51
• /
• 2005

Material degradation is a multibillion-dollar problem which affects all the industries amongst others. The last decades have seen the development of newer and more effective techniques such as Focused-ion beam(FIB), Transmission electron microscopy(TEM), Secondary-ion mass spectroscopy(SIMS), auger electron spectroscopy(AES), X-ray Photoelectron spectroscopy(XPS) , Electrochemical impedance spectroscopy(EIS), Photo- stimulated luminescence spectroscopy(PSLS), etc. to study various forms of material degradation. These techniques are now used routinely to obtain information on the chemical state, depth profiling, composition, stress state, etc. to understand the degradation behavior. This paper describes the use of these techniques specifically applied to materials degradation and failure analysis.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.8
• /
• pp.1121-1126
• /
• 2006

Methanol oxidation effect on carbon supported Pt was investigated as a function of Pt content in a sample which is closely correlated with Pt particle sizes. After prolonged methanol oxidation the Pt particle size did not change within the experimental error ranges. The $^{13}C$ chemical shift and linewidth of CO adsorbed on Pt show non-linear behavior simply due to the Pt particle size difference. The Pt size variation difference between this work and the previous reports of the particle growths is explained by the experimental temperature difference.

• Carbon letters
• /
• v.14 no.3
• /
• pp.175-179
• /
• 2013

Isolated single wall carbon nanotubes (SWCNTs) were synthesized by chemical vapor deposition (CVD) using a liquid precursor (xylene) as a carbon source. Transmission electron microscopy (TEM) and atomic force microscopy confirmed the isolated structure of the SWCNTs. Micro-Raman measurements showed a tangential G-band peak ($1590cm^{-1}$) and radial breathing mode (RBM) peaks ($150-240cm^{-1}$). The tube diameters determined from the RBM frequencies are in good agreement with those obtained from TEM. The chirality of the isolated SWCNTs could be determined based on the energy of the laser and their diameter. A further preliminary study on the nitrogen doping of isolated SWCNTs was carried out by the simple use of acetonitrile dissolved in the precusor.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.3-9
• /
• 1993

A new method is developed for analysis of the electromagnetic coupling to an angled two-strip transmission line. It consists of solving the cylindrical transmission line equations an- alytically, and then adjusting the involved parameters to support the cylindrical TEM mode along its equivalent model of the angled two-plate transmission line. Its analytic solution agrees with the numerical value obtained by using the circuit-concept approach.

• Textile Coloration and Finishing
• /
• v.23 no.2
• /
• pp.83-89
• /
• 2011

Poly(vinyl alcohol) (PVA), PVA/Montmorillonite (MMT), PVA/Silver (Ag), and PVA/MMT/Ag nanocomposite nanowebs were prepared by electrospinning technique in aqueous solution. In order to investigate the effect of inorganic materials on the morphology and thermal properties of PVA based nanocomposite nanowebs, experiments were performed with 5 wt.% of MMT and Ag. Field emission type scanning electron microscopy, transmission electron microscopy (TEM), reflection type X-ray diffraction (XRD), and thermal gravimetric analyzer were utilized to characterize nanocomposite nanowebs. TEM and XRD results show MMT and Ag were well dispersed in PVA nanowebs. Those inorganic nanoparticles enhanced thermal property of the nanocomposite nanowebs.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.54-57
• /
• 2007

A cyclotetraphosphazene derivative having eight chains was synthesized from octachlorocyclotetraphosphazene, which was employed along with cholesterol for the preparation of vesicles. The resulting vesicles were characterized by TEM and encapsulation efficiency. The stability of the vesicles was enhanced in the presence of dihexadecylphosphate.

• Carbon letters
• /
• v.6 no.2
• /
• pp.79-85
• /
• 2005

The work reported in this paper relates to preparation and characterization of carbon nanomaterials by CVD method on different substrates by decomposition of certain hydrocarbons at 550-$800^{\circ}C$ using a horizontal quartz tube reactor. Monometallic and bimetallic catalyst system of iron and nickel were used for the preparation of different carbon nanomaterials. The influence of various parameters such as substrate/catalyst preparation parameters, the nature of substrate, catalyst concentration, reaction time and temperature on the growth, yield and alignment of carbon nanotubes has been studied. The characterization of carbon nanomaterials has been carried out using SEM, TEM and TGA. The carbon nanomaterials developed were vertically aligned on a large area of flat quartz substrate.