• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.10
• /
• pp.923-927
• /
• 2000

This paper presents a relationship between DOP for TOA and TDOA is defined using the error covariance matrix of TDOA. It is analytically shown that the error ellipsoid of TOA is as same as that of TDOA in magnitude and in orientation, which means that DOP for TOA is identical to the DOP for TDOA. By computer simulation, the positioning performance of two methods is compared, and we verify our assertion.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.729-737
• /
• 2012

In case that multiple jammers are transmitting the signals which are the same type a general algorithm based on TDOA method cannot estimate the positions of multiple jammers because there are many TDOA measurements including true and false values. This paper, therefore, designs a new algorithm based on TDOA method to localize multiple jammers. In this algorithm, TDOA measurements are obtained by rotating the reference sensor, and then the positions of multiple jammers can be estimated by detecting congregated point among the multiple estimated positions from TDOA measurements. Through computer simulations, it is verified that this algorithm localizes the multiple jammers well. The performance of the algorithm are also analysed by changing the distance between sensors and jammer, and sampling frequency.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.59-61
• /
• 2012

TDOA 기법은 위치추정 기법의 하나로 간단한 구조와 높은 정확도를 가지는 장점으로 인해 실내측위, 군사, 의료 분야 등에 자주 사용된다. 본 논문에서는 MPM(Matrix Pencil Method)를 이용한 고분해능 TDOA 추정 기법을 제안한다. 제안된 기법은 기존의 교차상관을 이용한 TDOA 기법에 비교하여 높은 정확도를 가지며 CW(Continuous Wave)와 같은 협대역 신호에 적용이 가능하다. 또한 잘 알려진 고분해능 기법 중 하나인 MUSIC(Multiple Signal Classification)에서 공분산 행렬을 사용하는 것과 달리 수집된 데이터를 바로 행렬로 만들어 사용하므로 복잡성이 낮은 특징이 있다. 제안된 기법의 성능을 검증하기 위해 소프트웨어 시뮬레이션 통해 SNR에 따른 오차와 연산량 측면에서 MUSIC 기법과 비교하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1934-1942
• /
• 2015

An estimation problem in the environment which GPS signals do not reach, should be solved by employing an indoor location estimation scheme. Location estimation schemes for indoor environments generally include the AOA, TOA, RSS, Fingerprint, and TDOA. For a ship environment where there exist many spaces enclosed by iron plates, the TDOA scheme is appropriate because location estimation is usually performed at a closed range. In this paper, we address the problem of estimating the location of a terminal under the ship environment. The problem of location estimation by using the TDOA is presented in detail, and then an algorithm for applying the estimation to the ship environment is proposed. Finally, the proposed algorithm of location estimation in a ship by the TDOA scheme is verified through simulations from three viewpoints.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.833-838
• /
• 2012

TDOA which is one of the position estimation methods is used on indoor positioning, jammer localization, rescue of life, etc. due to high accuracy and simple structure. This paper proposes the super-resolution TDOA estimator using MPM(Matrix Pencil Method). The proposed estimator has more accuracy and is applicable to narrowband signal compared with the conventional cross-correlation. Furthermore, its complexity is low because obtained data directly is used for construction of matrix unlike the MUSIC(Multiple Signal Classification) which is one of the well-known super-resolution estimator using covariance matrix. To validate the performance of proposed estimator, errors of estimation and computational burden is compared to MUSIC through software simulation.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.962-969
• /
• 2011

This paper proposes the DOA estimation method based on TDOA/AOA for jammer localization method in GBAS environment. The proposed method can effectively estimate DOA of jamming signal as the range for DOA estimation is reduced remarkably by using DOP and 1st approximate solution using TDOA measurements only. Through the proposed method, more precise DOA can be obtained and the performance of jammer localization is increased simultaneously. Also, the effectiveness of proposed method will be confirmed through the simulated results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.9
• /
• pp.746-756
• /
• 2013

The emitter geolocation method using the time difference of arrival (TDOA) and the frequency difference of arrival (FDOA) has more accurate performance comparing to the single TDOA or FDOA based method. The estimation performance varies with the sensor paring strategies, the deployment and velocities of the sensors. Therefore, to establish effective strategy on the electronic warfare system, it is required to analyze the relation between the estimation accuracy and the operational condition of sensors. However, in the conventional non-iterative method, the restriction of the deployment of sensors and the reference sensor exists. Therefore, we derive the emitter geolocation method based on a Gauss-Newton method which is available to apply to any various sensor pairs and the deployment and velocities of the sensors. In addition, simulation results are included to compare the performance of geolocation method according to the used measurements: the combined TDOA/FDOA, TDOA, and FDOA. Also, we present that the combined TDOA/FDOA method outperforms over single TDOA or FDOA on the estimation accuracy with the CEP plane.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.97-104
• /
• 2018

In the conventional direction finding, the antenna is installed at a high position on the ground to detect the position of the target with the environment of the LOS(Line of Sight) as much as the signal receiving environment. However, in order to configure such environment, high cost and installation time were required. In this paper, we use TDOA(Time Difference of Arrival) technique to utilize drones in direction finding, so that four drones can be used for directions finding simulation. Simulations based on drone and TDOA direction finding were constructed using additional signal processing Taylor series and Exact Interactive Algorithm. In the simulation, the receiving power is defined by using the 800MHz path-loss model using the GPS information of the ground direction detection, and the position estimation performance is analyzed when the TDOA technique, the Taylor series, and the Exact Interactive Alogrithm are applied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2B
• /
• pp.99-106
• /
• 2009

The tracking information of objects or persons plays the important role for being advanced of the technology in the logistics management or processing. In this paper, we propose the TDOA-based localization method for port logistics environment for obtaining accurate location of a tag which is attached to some objects or persons. The proposed method consists of these modules for precision : An adaptive selection module of base reader, 2.5D locating method and position-restriction method using a map. This paper includes the performance evaluation of those methods. We could see the improved performance in the simulation. And we also implemented the system and achieved the accuracy of DRMS and CEP within 4 meters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.5
• /
• pp.88-96
• /
• 2014

In modern electronic warfare systems, the necessity of a more accurate estimation method based on non-AOA (arrival of angle) measurement, such as TDOA and FDOA, have been increased. The previous researches using single TDOA have been carried out in terms of not only the development of emitter location algorithms but also the enhancement of measurement accuracy. Recently, however, the combined TDOA/FDOA method is of considerable interest because it is able to estimate the velocity vector of a moving emitter and acquire a pair of TDOA and FDOA measurements from a single sensor pair. In this circumstance, it is needed to derive the required FDOA measurement accuracy in order that the TDOA/FDOA combined localization system outperforms the previous single TDOA localization systems. Therefore, we analyze the contribution of FDOA measurement accuracy to emitter location, then propose the criterion based on CRLB (Cramer-Rao lower bound). Simulations are included to examine the validity of the proposed criterion by using the Gauss-Newton algorithm.