• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E1
• /
• pp.9-18
• /
• 2006

Aerosol hygroscopic properties were measured by a tandem differential mobility analyzer (TDMA) system during the Aerosol Characterization Experiment (ACE)-Asia campaign from 31 March to 1 May 2001. Two high flow differential mobility analyzers (DMAs) were used to maximize the count rate on board the Center for Interdisciplinary Remotely Piloted Aircraft (CIRPAS) Twin Otter aircraft. Hygroscopic growth factor distributions of particles having initial dry nanoparticle diameters of 0.040, 0.059, 0.086, 0.126, 0.186, 0.273, 0.400, and $0.586{\mu}m$ were measured during 19 research flights. Data collected during 12 of those flights were used to investigate aerosol mixing state and the influence of aerosol source region on size-resolved hygroscopicity. The uniformity in size-resolved hygroscopicity was quantified to facilitate comparison between measurements made in different air masses. Hygroscopic growth factors are strongly dependent on source region and sizes. Mean hygroscopic growth factors were observed to be greatest when the air mass origin was from the south. The mean growth factors for continental sources decreased with initial size from 1.47 to 1.27 for $0.040{\mu}m\;and\;0.586{\mu}m$, but increased with initial size from 1.44 to 1.8 for $0.040{\mu}m\;and\;0.400{\mu}m$ dry diameters for marine sources.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.3-9
• /
• 2015

We investigate rate scheduling and power allocation problem for a delay constrained CDMA systems. Specifically, we determine an energy efficient scheduling policy, while each user maintains the short term (n time slots) average throughput. We consider a multirate CDMA system where multirate is achieved by multiple codes. Each code can be interpreted as a virtual user. The aim is to schedule the virtual users into each time slot, such that the sum of transmit energy in n time slots is minimized. We then show that the total energy minimization problem can be solved by a shortest path algorithm. We compare the performance of the optimum scheduling with that of TDMA-type scheduling.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.321-328
• /
• 2010

This paper presents a coordinator-based TDMA reader protocol that can avoid the reader collision in a passive RFID system. In the proposed protocol, the coordinator can not only minimize the number of empty slots by efficiently allocating slots to readers incoming in Poisson distribution, but reduce latency time through the limited frame size. The proposed protocol can be implemented in either mobile or fixed mode through the slot structure to be described in the context. The simulation results show it works as suggested and the frame size limitation as well as the statistical distribution of incoming readers has a great impact on the overall slots and the average latency time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2703-2708
• /
• 2014

The conventional bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in arbitrating the bus. The efficiency of bus usage can be determined by the selection of arbitration method. Fixed Priority, Round-Robin, TDMA and Lottery arbitration policies are studied in the conventional arbitration method where the bus transaction cycle, the wait cycle and the priority are primarily considered. In this paper, we propose the arbitration method that considers the wait cycle. Furthermore, we verify the bus transaction cycle and the wait cycle compared with the other arbitration methods through TLM(Transaction Level Model).

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.327-336
• /
• 2009

This paper analysis the STDMA protocol in aviation wireless data communications and carry out the performance analysis with simulation. The STDMA protocol that is currently being used in VDL Mode-4 has TDMA system characteristics, which provides time-division into several slots per one frame. The results of modeled STDMA protocol's data channel analysis show approximate 0.7 channel throughput at the transmission probabilities 0.045, 0.2, and 0.3 in the aspects of channel throughput. The delay time are 2.32434sec, 2.0293sec, and 2.12128sec respectively. These results shows the good stability in spite of variable transmission probabilities. Consequently, it is expected that STDMA protocol would be used properly for domestic communication demands and supervision system improvement by means of applying this to point-to-point communication and data/location broadcasting as a fundamental technology in CNS/ATM.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.139-147
• /
• 2020

In this paper, design measure were proposed for the construction of terminal systems for airborne platforms, which are key element in the Joint Tactical Data Link System (JTDLS) complete system. The Korean perfect tactical data link (JTDLS) is a communication system to establish an independent tactical data link network and needs to develop a MIDS-LVT (Link-16) communication terminal for datalink. Once a Ground/Navy JTDLS terminal system is established around airborne platform, it will be possible to break away from reliance on NATO-based tactical data link joint operations and establish independent Korean surveillance reconnaissance real-time data sharing and tactical data link operations concepts. in this paper, the essential development elements of airborne platform mounting and operable JTDLS terminals are presented, and the concept of system design is proposed to embody them. Further, improved system performance was analyzed by applying the concepts of complex relative navigation system and Advanced TDMA protocol for the deployment of airborne tactical datalink networks.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.6
• /
• pp.291-300
• /
• 2012

This paper deals with the design and implementation of wireless sensor network protocol for smart power outlet system capable of fire detection, power monitoring, standby power cutoff, and home automation. The proposed protocol integrates both the CSMA and the TDMA protocols for low power consumption and good scalability. A prototype smart power outlet system employing the proposed protocol and a simple home automation network including the power outlet system have been implemented for evaluating the feasibility of the proposed protocol The result shows that the proposed protocol allows the power outlet system to be scalable with high power efficiency.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.39-42
• /
• 1998

In this paper is design of signal discriminatior system for the third generation mobile telecommunication system (IMT-2000 : International mobile telecommunication service-2000) This system is basically using multiplexing method of CDMA, TDMA and FDMA that this system can be solved third generation systems problems-Frequency bandwidth, international roaming and development new architecture of mobile telecommunication systems. Designed signal discriminator system is perfectly separated three styles multiplexing method signals that more easily, nearly and economically implementation of third generation telecommunication systems. As we develop signal discriminator we will contribute to technical evolution of mobile telecommunication for third generation and stay ahead in the interior technical accumulation in addition to international intercourse as to mobile telecommunication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2433-2438
• /
• 2011

Bus system consists of several masters, slaves, arbiter and decoder in a bus. Master means the processor that performs data command like CPU, DMA, DSP and slave means the memory that responds the data command like SRAM, SDRAM and register. Furthermore, as multiple masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, bus system performance can be changed definitely. Fixed priority and round-robin are used in general arbitration method and TDMA and Lottery bus methods are proposed currently as the improved arbitration schemes. In this study, we proposed the score arbitration method and synthesized it using Hynix 0.18um technology, after design of RTL. Also we analyze the performance compared with general arbitration methods through simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1085-1094
• /
• 1999

In the global system for the mobile communication (GSM) system, the class of training sequences used in a TDMA frame is a preamble sequence with a period of 16 bits for the channel impulse response measurement and the start up equalization during the training period. If the transmitted preamble sequence and the binary sequence in the receiver properly satisfy a condition, this training sequences used for fastly adjusting the tap coefficients and impulse response can be measured by calculating the crosscorrelation function. In this paper, it is used that training sequences have zero values of the autocorrelation at all delays except zero and middle shifts. A comparison of convergence rate, a mathematical approach for fast start-up equalization and correctly channel impulse response measurement are proposed.