• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.123-133
• /
• 2023

Active queue management (AQM) is a leading congestion control system, which can keep smaller queuing delay, less packet loss with better network utilization and throughput by intentionally dropping the packets at the intermediate hubs in TCP/IP (transmission control protocol/Internet protocol) networks. To accelerate the responsiveness of AQM framework, proportional-integral-differential (PID) controllers are utilized. In spite of its simplicity, it can effectively take care of a range of complex problems; however it is a lot complicated to track down optimal PID parameters with conventional procedures. A few new strategies have been grown as of late to adjust the PID controller parameters. Therefore, in this paper, we have developed a Squirrel search based PID controller to dynamically find its controller gain parameters for AQM. The controller gain parameters are decided based on minimizing the integrated-absolute error (IAE) in order to ensure less packet loss, high link utilization and a stable queue length in favor of TCP networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.611-614
• /
• 2007

This paper suggests a TCP/IP-based remote data monitoring system, which combines PDA (Personal Digital Assistant) and WLAN (Wireless Local Area Network) technologies. Wireless PDA devices are used for remote monitoring of wireless communication by continuously collecting remote device data transmitted from servers such as temperature, humidity and device status, and displaying them on mobile devices. Therefore, remote data monitoring systems that integrate wireless and wired services provide data collection adaptive to administrators and efficient identification of device status.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.759-761
• /
• 2016

ICMP(Internet Control Message Protocol) supports the processing of error in the communication network based TCP/IP. If a problem is occurred in a data transmission process, router or receiving host sends ICMP message containing the error cause to sending host. However, in this process an attacker sends a fake ICMP message to the host so that the communication between the hosts can be abnormally terminated. In this paper, we performed a study to prevent several attacks related to ICMP. To this, we have designed outbound traffic controller so that attack packet is not transmitted to network in operating system of host.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.2
• /
• pp.67-75
• /
• 2005

In this paper, we design and implement real time IP security packet analyzer on IPv4 and IPv6 network. This packet analyzer sniffs and analyzes the packets generated by the protocols that are used by IPsec, IKE, IPv4 and IPv6 such as AH, ESP, ISAKMP, IP, ICMP and so on. The purpose of this analyzer is to check current security status of the network automatically. In this paper we provide implementation details and the examples of security evaluation by using our security packet analyzer system.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.438-443
• /
• 2020

To transfer files between nodes on network based on Ethernet, file transfer protocol (FTP) on TCP/IP and trivial file transfer protocol (TFTP) on UDP/IP are mostly used. Due to the lack of resources (processor, memory and so on) in the embedded system where we generally use for simple works with small firmware like ones; many of the systems implement only UDP/IP for their network stacks. Thus, TFTP is greatly to be preferred. For examples, environmental sensor devices for sensor networks, Boot Loader for general embedded device and preboot execution environment (PXE) boot for PC provide the TFTP. The logic of TFTP is simple for file transmission but, there is Stop-And-Wait problem during the process which occurs long blocking time. In this paper, we propose an algorithm which called QuTFTP(Quick UDP Trivial File Transfer Protocol) to reduce the length of the blocking time and to be compatible with the legacy TFTP.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.3
• /
• pp.138-143
• /
• 2003

With information communications and network environments merged wire/wireless networks are generalized. In this viewpoint, WAP is used by communication protocol for the data communication in the field of wireless environment. WTLS developed for the secure communications optimize TLS adapted wireless environment in the TCP/IP internet protocol. But WTLS denote WAP security problem, end-to-end problem, and power consumption, etc. Therefore in this paper we proposed WTLS cryptographic algorithm eliminated WTLS disadvantages. Proposed algorithm solved power consumption, calculated complexity, and security problems because it is not unique but hybrid form.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.261-268
• /
• 2000

본 논문에서는 무정전 전원공급장치의 제어와 LAN 환경에서의 원격관리를 위한 통신·제어보드의 개발에 대해서 기술하였다. 개발된 통신·제어보드는 범용 마이크로컨트롤러와 이더넷 컨트롤러로 구성되었고 무정전 전원공급 장치를 제어하는 기능과 원격의 관리자와 데이터 통신 기능을 갖는다. 원격관리 방식은 TCP/IP 환경의 표준 네트워크 관리프로토콜인 SNMP(Simple Network Management Protocol)를 사용하였다. 또한 원격에서 무정전 전원공급장치의 상태를 모니터링하고 관리할 SNMP 관리 프로그램을 제작하였다. 제안된 시스템은 기존의 무정전 전원 공급장치의 원격관리 시스템에 비해 효율적이며 안정한 동작을 한다. 본 시스템의 안정성과 신뢰성을 실험을 통하여 입증하였다.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.130-134
• /
• 2012

This paper introduces a home network service system using a low-cost wireless router on OpenWrt which can be remotely controled by Android devices. The proposed system consists of an embedded system development platform for home network service control based on OpemWrt embedded Linux, an embedded system development platform, a remote control on Android, and a home linghting device made by an interface board with LEDs. The prototype system is made of a wireless router of Buffalo, WZR-HP-G450H, Arduino Uno interface board with LEDs, and an Android development kit of HBE-SM5-S421. The operation was performed by TCP/IP programming for Android remote control, socket programming between Android development kit and wireless router, and UART communication programming between the interface board and wireless router. The implementation result shows that a low cost home network systme could be implemented with a wireless router.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.169-176
• /
• 2006

Since home network system is usually set up based on the built-in system inside home at the time of construction, it has a difficulty in being compatible with new devices after construction. In this paper, we propose DBS(Dynamic Binding System) that can make links effectively among the devices located in inside and outside of home networks. Implementation of the DBS is based on the ZigBee's binding in WPAN(Wireless Personal Area Network). For this research, we constructed the system consisting of home server that contains proxy server and location server, devices inside home in which tinyOS is embedded, and mobile device that is an emulator. The communication inside home is done by IEEE 802.15.4 protocol and the communication between servers and mobile devices outside home is done by TCP/IP protocol. Regardless of device's address format, the DBS facilitates a link among the devices located inside and outside of home networks. And, introducing a new device into home network can be recognized easily by exchanging messages between devices.

• Smart Media Journal
• /
• v.12 no.2
• /
• pp.91-102
• /
• 2023

The Energy Management System (EMS) communicates with power plants and substations, monitors the substations and plant operational status of the transmission and substation system for stability, continuity, real-time, and economy of power supply, and controls power plants and substations. Currently, the power exchange EMS communicates with power plants and substations based on the serial communication-based Distributed Network Protocol (DNP) 3.0 protocol. However, problems such as the difficulty of supply and demand of serial communication equipment and the lack of installation space for serial ports and modems are raised due to the continuous increase in new facilities to perform communication, including renewable power generation facilities. Therefore, this paper presents a TCP/IP-based communication method instead of the existing serial communication method of the power exchange EMS, and presents a security risk analysis that may occur due to changes in the communication method and a countermeasure to the security risk.