• 대한수학회보
• /
• 제45권4호
• /
• pp.663-670
• /
• 2008

In this paper, the aim is to solve the neutral delay differential equations in the following form using multiquadric approximation scheme, (1) $$\{_{\;y(t)\;=\;{\phi}(t),\;\;\;\;\;t\;{\leq}\;{t_1},}^{\;y'(t)\;=\;f(t,\;y(t),\;y(t\;-\;{\tau}(t,\;y(t))),\;y'(t\;-\;{\sigma}(t,\;y(t)))),\;{t_1}\;{\leq}\;t\;{\leq}\;{t_f},}$$ where f : $[t_1,\;t_f]\;{\times}\;R\;{\times}\;R\;{\times}\;R\;{\rightarrow}\;R$ is a smooth function, $\tau(t,\;y(t))$ and $\sigma(t,\;y(t))$ are continuous functions on $[t_1,\;t_f]{\times}R$ such that t-$\tau(t,\;y(t))$ < $t_f$ and t - $\sigma(t,\;y(t))$ < $t_f$. Also $\phi(t)$ represents the initial function or the initial data. Hence, we present the advantage of using the multiquadric approximation scheme. In the sequel, presented numerical solutions of some experiments, illustrate the high accuracy and the efficiency of the proposed method even where the data points are scattered.

• 대한수학회보
• /
• 제45권2호
• /
• pp.299-312
• /
• 2008

In this paper, we establish some oscillation criteria for nonautonomous second order neutral delay dynamic equations $(x(t){\pm}r(t)x({\tau}(t)))^{{\Delta}{\Delta}}+H(t,\;x(h_1(t)),\;x^{\Delta}(h_2(t)))=0$ on a time scale ${\mathbb{T}}$. Oscillatory behavior of such equations is not studied before. This is a first paper concerning these equations. The results are not only can be applied on neutral differential equations when ${\mathbb{T}}={\mathbb{R}}$, neutral delay difference equations when ${\mathbb{T}}={\mathbb{N}}$ and for neutral delay q-difference equations when ${\mathbb{T}}=q^{\mathbb{N}}$ for q>1, but also improved most previous results. Finally, we give some examples to illustrate our main results. These examples arc [lot discussed before and there is no previous theorems determine the oscillatory behavior of such equations.

• Parasites, Hosts and Diseases
• /
• 제32권2호
• /
• pp.111-116
• /
• 1994

우리나라 소에 유행하고 있는 Theileria sergenti의 예방을 위한 연구의 일환으로 긴sergeki merozoite 수용성 항원중에서 면역원성 물질로 보고한 바 있는 34. 29 및 18 kDa와 항원성 물질인 45 kDa에 대하여 Peptdie 구성 특성을 밝히기 위하여. 이들 물질에 대한 아미노산 서열을 결정하였다. 이를 생합성하여 Chou-Fasmanprediction법에 의해 항원 결정기를 확인하였던 바. 45 kDa. 34 kDa. 29 kDa 그리고 18 kDa의 Polypeptide는 6 4 2 그리고 0 개의 항원 결정기를 갖고 있었다. 그런데 45 kDa 물질은 항 T. serpenti혈청에 대하여 면역원성이 인정되않았던 물질이었다.

• 충청수학회지
• /
• 제13권1호
• /
• pp.45-51
• /
• 2000

We will investigate some properties of integro-delay-differential equations, $$x^{\prime}(t)=A(t)x(t-g_1(t,x_t))+{\int}_{t_0}^{t}B(t,s)x(s-g_2(s,x_s))ds,\;t_0{\geq}0,\\x(t_0)={\phi}$$,

• 한국강구조학회 논문집
• /
• 제8권3호통권28호
• /
• pp.35-45
• /
• 1996

The purpose of this paper is to investigate experimentally the strength and deformation of T-joints to improve the structural behavior of truss connection consisted in square hollow steel section. There are two-types to be changed in T-joint shape. One type is TP-series that a brace member is rotated to 45 degree, another type is TR-series that a chord member is rotated to 45 degree. The most important results obtained from the 2nd experiment on the T-joints is as follow; The yielding strength and initial stiffness of TP-series increase more than a current type(TS-series) in $0.6{\leq}{\beta}(d/D){\leq}0.7(0.85{\leq}{\beta}$'$(={\sqrt2}{\cdot}{\beta}){\leq}1.0)$.

• Parasites, Hosts and Diseases
• /
• 제31권3호
• /
• pp.215-222
• /
• 1993

Toxoplasmngon gondii의 세포내 배양에 적합한 숙주 세포 주를 찾기 위하여 정상 세포 2종류(MDCK-canine kidney cells; Vero-monkey kidney cells) 및 암세포 6종류(A 549, PC 14-human lung cancer cells; SNU 1, SNU 16, MKN 45-human stomach cancer cells; HL-60-human promyelocytic leukemia cells)를 대상으로 하여 각 세포 주의 T.gondii 감염에 대한 감수성을 형태학적 관찰 및 3H-uracil 흡수 시험을 통하여 비교하였다. T.gondii 대한 감수성은 A 549 및 PC 14 세포가 가장 높았고, Vero, HL-60, MDCK 및 SNU 1 세포가 그 다음, SNU 16 및 MKN 45 세포는 가장 감수성이 낮았다. 또한 각 세포 주에 있어서 T.gondii 감염 후 충체증식 정도를 정량화하여 12시간, 36시간 및 60시간에 각각 측정한 바 충체 수를 적게($2{\times}10^5/ml$) 투여했을 때는 A 549, PC 14, Vero, MDCK 세포들에서 감염 60시간까지 충체의 분열 증식이 계속 증가하였고, 충체 수를 많이($50{\times}10^5/ml$) 주입하였을 때는 대부분의 세포들에서 감염 12시간에 최고의 증식을 보이다가 이후 증식이 감소하였다. 이상의 결과로 보아 기son사거 분리 계대 및 충주(strain) 확립을 위해서는 A 549 및 PC 14 세포가 가장 적합할 것으로 판단되며, 충체 주입 수 및 배양 시간별로 충체의 증식 정도가 다름을 알 수 있었다.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.112-121
• /
• 1988

A study on friction welding of carbon steel bar (SM45C) to chrome molybedenum steel bar(SCM4) is examined experimentally through tensile test, hardness test, microstructure test and fatigue test. so, this paper deals with optimizing the welding concitions and analyzing various mechanical properties about friction welds of SM45C to SCM4 steel bars. The results obtained are summarized as follows; 1) For friction welded joints of SM45C to SCM4 steel bars, the total upset(U)increases linearly with an increase of heating time ($t_{1}$) till 6s. 2) The determined optimum welding conditions are heating time ($t_{1}$)2s, upsetting time($t_{2}$), 3s, heating pressure($p_{1}$), 4kgf/$mm^{2}$(39.2MPa), upsetting pressure($p_{2}$, 8kgf/mm$^{2}$(78.4MPa) and rotating speed(N), 2, 000rpm when the total upset(U) is 3.4mm, resulting in a computed relationship between the joint tensile strength .sigma.$_{t}$ (kgf/mm$^{2}$and the total upset U(mm); .sigma.$_{t}$ =$0.21U^{3}$ - $3.38U^{2}$ +17.03U + 66.00 3) As the elongation is increased more and more, the fracture position becomes away from weld interface and the fractures are similar to those of SM45C. Fracture is taken place on SM45C side. 4) The weld interface of two dissimilar materials is mixed strongly, and the heat affected zone is about 2.0mm at SM45C while about 2.7 mm at SCM4 side. Therefore, the welded zone and heat affected zone are very narrow, comparing with those of the joints welded by the other welding methods. 5) The fatigue strengths at N=10$^{6}$ cycles of SM45C, SCM4 and friction welded joints are 23kgf/$mm^{2}$, 33kgf/$mm^{2}$(220.5 MPa), and 22.5kgf/$mm^{2}$(220.5MPa) respectively, and fracture at friction welded joint takes place at the side of SM45C. 6) The hardness of the friction weld interface is 3 times higher than that of base metal. 7) Fatigue strength of friction welded joint is higher than that of base metal. 8) Notch sensitivity factor of friction welded joint is lower than that of base metal.

• 대한물리의학회지
• /
• 제8권3호
• /
• pp.289-294
• /
• 2013

PURPOSE: The purpose of this study was to examine differences in erect spinae activities at different height of table during ultrasound therapy in order to propose a optimum work environment. METHODS: Twenty five healthy adult males and females volunteered to participate in this study. EMG signals of both erector spinae(T10, T12, L2, L4) were recorded throught the surface electromyography system at different height of table(45cm, 56.2cm, 67.5cm) during ultrasound therapy work. RESULTS: The higher table heights was, the lower %RVC of the T10, T12, L2, L4 erect spinae at both sides. The left and right T10, T12 and the left L4 showed significant differences. The lower the spinal level was, the higher %RVC of both erect spinae at 45cm, 56.2cm, 67.5cm. The left erect spinae at 56.2cm, right erect spinae at 45cm, 67.5cm showed significant differences. CONCLUSION: The muscle activities of both erect spinae decreased at higher table height and increased lower spinal level. We identified lower table height are risk factor of spine work related musculoskeletal disorders.

• 대한수학회보
• /
• 제45권4호
• /
• pp.717-728
• /
• 2008

Let H be a real Hilbert space and S = {T(s) : $0\;{\leq}\;s\;<\;{\infty}$} be a nonexpansive semigroup on H such that $F(S)\;{\neq}\;{\emptyset}$ For a contraction f with coefficient 0 < $\alpha$ < 1, a strongly positive bounded linear operator A with coefficient $\bar{\gamma}$ > 0. Let 0 < $\gamma$ < $\frac{\bar{\gamma}}{\alpha}$. It is proved that the sequences {$x_t$} and {$x_n$} generated by the iterative method $$x_t\;=\;t{\gamma}f(x_t)\;+\;(I\;-\;tA){\frac{1}{{\lambda}_t}}\;{\int_0}^{{\lambda}_t}\;T(s){x_t}ds,$$ and $$x_{n+1}\;=\;{\alpha}_n{\gamma}f(x_n)\;+\;(I\;-\;{\alpha}_nA)\frac{1}{t_n}\;{\int_0}^{t_n}\;T(s){x_n}ds,$$ where {t}, {${\alpha}_n$} $\subset$ (0, 1) and {${\lambda}_t$}, {$t_n$} are positive real divergent sequences, converges strongly to a common fixed point $\tilde{x}\;{\in}\;F(S)$ which solves the variational inequality $\langle({\gamma}f\;-\;A)\tilde{x},\;x\;-\;\tilde{x}{\rangle}\;{\leq}\;0$ for $x\;{\in}\;F(S)$.

• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.69-76
• /
• 2003

본 논문에서 새로운 냉간성형 각형강관 T형 접합부의 최대내력과 변형제한치에 대한 연구이다. 새로운 접합부는 지관을 트러스 평면에 대하여 $45^{\circ}$회전시켜서 주관에 용접하는 형상이고, 지관 $45^{\circ}$회전형 T형 접합부 실험결과 중에서 주관 웨브 파괴가 지배하는 접합부만을 대상으로 설정하였다. $16.7{\leq}2{\gamma}(B/T){\leq}33.3$이고 $0.63{\leq}{\beta}(b_1/B){\leq}0.7$ 범위의 지관 $45^{\circ}$회전형 T형 접합부에 대하여, 최대내력을 정의를 위한 변형제한치는 주관폭의 3% 변형량(3%B) 으로 제안하였다. $0.63{\leq}{\beta}{\leq}0.7$ 범위의 기본형에 대한 기존의 항복선모델을 검토하고, 지관 $45^{\circ}$회전형에 대한 내력식을 제안하였다. 제안내력식은 기둥좌굴이론에 근거하고 있고, 냉간성형시 발생한 곡률부분을 고려하였다. 최종적으로 최적화된 주관단면 선택을 위한, 항복응력도와 $2{\gamma}$의 최적조건을 제안하였다.