• 한국식품저장유통학회지
• /
• 제7권2호
• /
• pp.166-170
• /
• 2000

In order to improve cut-flower export packaging on the distribution process, newly developed T-type(trapezoid type) container was tested and evaluated on the viewpoints of the protection, workability, and economics. T-type container performed better in protection and workability comparing to 0201 and modified 0201 type containers. Especially, load efficiency of T-type container was 33 percent higher than others, indicating that total distribution costs from Korea to Japan can be saved up to 1.7million dollars per year. T-type container is also advantageous because of its superior display performance and environmentally friendly design. We recommend that T-type container is suitable for most of cut-flowers which are usually horizontally packed such as roses, chrysanthemums, and lilies.

• 한국환경복원기술학회지
• /
• 제15권3호
• /
• pp.67-74
• /
• 2012

This study was carried out to cultivate evergreen-leaved tree container seedlings having low cost of equipment and easy to control. Two species of V. odoratissimum var. awabuki and Q. glauca planting in respective underground container were showed survival rate above 90%. The Relative growth rates of height was good in non-treatment and root collar diameter was no significant difference between treatments. The T/R ratio was respectively 1.1, 1.0 in container type of F, G. and root's biomass products was more effective than others. A container type of F showed better Quailty index than others with 16.2 values. Q. glauca was higher T/R ratio in root development than shoot and the quality index was high in container type of E, D with 4.0. 3.5, respectively. On the basis of the results obtained in this study, we can concluded that the underground container type was suitable to F in V. odoratissimum var. awabuki and to D or E in Q. glauca.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.838-841
• /
• 2005

This study was carried out to analyze the effect of wind load on the structural stability of a 50ton articulation type container crane using wind tunnel test and provide a container crane designer with data which can be used in a wind resistance design of an articulation type container crane assuming that a wind load 75m/s wind velocity is applied in an articulation type container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of an articulation type container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients were investigated and uplift forces at each supporting point due to the wind load were analyzed.

• 한국항해항만학회지
• /
• 제31권3호
• /
• pp.197-204
• /
• 2007

1999년부터 2002년까지 4년간 부산항 환적 컨테이너의 연평균 증가율은 34%를 상회하는 고속 성장을 하였다. 하지만 2003년부터 2006년까지의 4년간 연평균 증가율은 7.7%로 급격히 감소하였으며, 더구나 2006년에는 0.6% 성장에 그쳐 그 동안 부산항 물동량 증가에 견인차 역할을 해오던 환적 컨테이너의 지속적인 성장이 관심사항으로 대두되었다. 이러한 현상은 부산항 환적 컨테이너의 45% 이상을 차지하고 있는 중국과 일본 항만의 환경 변화와 밀접한 관련이 있다. 즉, 북중국 주요 3개 항만에 대한 대형 선사들의 직 기항 증가와 상해의 심수항 개장은 부산항의 환적 컨테이너 유치에 심각한 타격을 가하고 있다. 일본 역시 항만 경쟁력을 높여 자국화물을 지키기 위해서 슈퍼 중추 항만 구상을 실현해 가고 있다. 본 연구는 부산항의 항로 교차형 및 중심 분산형의 환적 유형 및 처리 실태를 분석하고, 이를 토대로 환적 컨테이너를 지속적으로 유치할 수 있는 정책적 방향을 모색해보고자 한다. 즉, 대형 선사들이 부산항을 환적 거점항으로 이용할 수 있도록 전용 터미널을 제공하는 것 등이 바로 그것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.371-372
• /
• 2006

This study was carried out to analyze the effect of wind load on the structural stability of a container crane according to the change of the boom shape using wind tunnel test and provide a container crane designer with data which can be used in a wind resistance design of a container crane assuming that a wind load 75m/s wind velocity is applied in a container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of a container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients of a container crane according to the change of the boom shape were investigated.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.87-94
• /
• 2006

In this study we carried out to analyze the effect of wind load on the structural stability of a container crane according to the change of the boom shape using wind tunnel test and provided a container crane designer with data which can be used in a wind resistance design of a container crane assuming that a wind load at 75m/s wind velocity is applied on a container crane. Data acquisition conditions for this experiment were established in accordance with the similarity. The scale of a container crane dimension, wind velocity and time were chosen as 1/200, 1/13.3 and 1/15. And this experiment was implemented in an Eiffel type atmospheric boundary-layer wind tunnel with $11.52m^2$ cross-section area. Each directional drag and overturning moment coefficients were investigated and uplift forces at each supporting point due to the wind load were analyzed.

• 한국자원식물학회지
• /
• 제33권1호
• /
• pp.24-32
• /
• 2020

본 연구는 국내 특산식물이며 신 관상식물로 기대되는 산꼬리풀[Veronica rotunda var. subintegra (Nakai) T.Yamaz.]의 효과적인 재배법을 구명하고자 수행되었다. 플러그 육묘는 파종용기와 파종량을 달리하였다. 재배는 묘의 소질, 식재용기, 토양종류 및 차광정도를 달리하여 처리하였다. 묘의 소질은 162, 200 및 288구 트레이를 이용하여 육묘한 묘를 사용였으며, 파종량은 1, 2, 4 및 6립을 파종하여 생산된 묘를 사용하였다. 본 연구에서 산꼬리풀의 육묘 시 트레이 종류는 162구가 적절하였으며, 셀 당 1립씩 파종할 경우 각 개체의 생육이 증가하였으나 4립 파종 시에는 전체 식물의 생육에 유리하였다. 묘의 소질에 따른 실험은 162구 트레이에서 생산된 묘와 4립씩 파종하여 생산된 묘에서 각기 우수한 생육을 보였다. 산꼬리풀 재배 시 식재용기의 용적량이 커질수록 지상부 및 지하부의 생육이 증가하는 경향이었으며, 용기의 재질에 따른 유의적인 차이는 나타나지 않았다. 토양조건별 생육은 원예상토에서 가장 왕성하였으며, 혼용토에서는 피트모스에 비해 마사토의 함량이 높은 조건에서 양호한 생육을 나타냈다.

• 한국농공학회논문집
• /
• 제46권4호
• /
• pp.39-46
• /
• 2004

This experiment was carried out to study on the effect of surface coating on thermal insulation of farm structures to improve thermal resistance and reflective effect of solar radiation. Nine different types of experimental specimen were compared in the temperature variations of inside and outside; A, B, C, D. E and F types are box container and G, H and I types are drum container. The size of these containers is $1,500{\times}2,000{\times}2,500$ mm and ${\varphi}$ $280{\times}330$ mm, respectively. Specimen of 3-type box(A, B, C) is galvanized steel sheet of thickness 0.45 mm. D, E and F types are sandwich panel of the thickness 50 mm inserted with urethane, glass wool and polystyrene form, respectively. G, H and I types are paint pot using in general. The surface of A. D, E, F and I types didn't any treatment, B, C and G types were treated with thermal insulation coating on the outside surface(B, G) or the inside and outside surface(C). And H type was treated with water paint coating on the only outside surface. In general, the experimental results showed the following tendencies; In case of A, B and C types. it was found that the thermal insulation effect of types coated with thermal insulation coating was improved remarkably than that of no treatment. And the thermal insulation effect between steel sheet and sandwich panel type was nearly similar There was not a significant difference of thermal insulation effect between thermal insulation coating and water paint coating. In time of drum container filled with rough rice, The difference of heat transfer tendency and temperature variation among surface treatments was nearly similar that of box types of galvanized steel sheet. And there was time lag about 6 hours between the temperature of middle part of rice and that of inside or outside surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1517-1520
• /
• 2003

In this paper, we design a wedge type rail-clamp which can protect container crane from wind with constant clamping force regardless of the operating period. When we design wedge type rail clamp, it is important to determine the weight for locker to descent smoothly with an initial clamping force of rail and pad. Therefor, this paper suggest a process to decide a wright within proper range which could be obtained using FEA of wedge type rail clamp.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.210-211
• /
• 2009

In this study, we propose characteristics improvement methods according to via hole plating method for FBAR Duplexer with US PCS($T_x$:1850MHz~1910MHz, $R_x$:1930MHz~1990MHz) bandwidth which is used for wireless systems. Also, we designed and fabricated 3.8*3.8*1.8mm size microminiature FBAR Duplexer based on this proposal. First of all, in this study, we fabricated pentagon shape resonators by different size to make filter combination, and their quality factor(Q) are 687 with 6.6% of $k_{eff}^2$. Using this resonators, designed 3*2Type $T_x$ filter and 3*4Type $R_x$ filter. The transmission line, which works as phase shifter, is designed with $210{\mu}m$ in width and 18mm in length Stripline type. Inductor, which is used for matching component, is designed with width of $75{\mu}m$, a technically achievable minimum width. And adopted plating method of filling via hole with conductive epoxy for improved grounding and thermal conductivity. Using these configuration with all of the matching component values, we found Duplexer characteristics of -1.57dB ~ -1.73dB in insertion loss, -56dB in attenuation at 1850MHz~1910MHz of $T_x$ band. Also, found -2.71 dB ~ -3.23dB in insertion loss, -58dB in attenuation at 1930MHz~1990MHz of $R_x$ band.