• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.352-362
• /
• 2016

The purpose of this study was to examine the level of stress, healthcare accreditation related job stress, adaptation, and turnover intentions, as well as to identify influencing factors of turnover intentions for operating room nurses. This study employed a descriptive correlational design. The data were collected from 163 operating room nurses using a structural questionnaire. Stress was different by age (F=5.629, p=.004), marital status (t=-2.907, p=.004), and children (t=-2.623, p=.010). Healthcare accreditation related job stress was different by age (F=11.924, p<.001), marital status (t=-4.747, p<.001), children (t=-4.434, p<.001), work experience in the OR (F=6.000, p=.003), and work reasons in the OR (t=-2.543, p=.012). Turnover intention was different by age (F=21.472, p<.001), education level (F=4.997, p<.008), religion (t=3.235, p=.001), work experience in the OR (F=13.599, p<.001), position (t=3.222, p=.002), work reasons in the OR (t=-3.001, p=.003), and a shift pattern of duties (t=-2.797, p=.006). Turnover intention was significantly correlated with stress, healthcare accreditation related job stress, and adaptation. Factors affecting turnover intention were healthcare accreditation related job stress, adaptation, and age. These factors accounted for 36.2% of turnover intention. These results suggest that relief of stress and healthcare accreditation related job stress and interventions for improving stress management.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.8 s.251
• /
• pp.873-879
• /
• 2006

To investigate applicability of the reference stress approach as simplified inelastic stress analysis to estimate local creep rupture, detailed finite element stress analyses of a T-piece pipe with different inner pressure and system loading levels are performed. The reference stresses are obtained from the finite element (FE) limit analysis based on elastic-perfectly-plastic materials, from which the local reference stress for creep rupture is determined from R5. The resulting inelastic stresses are compared with elastic stresses resulting from linear elastic FE calculations. Furthermore they are also compared with the stresses from full elastic-creep FE analyses. It shows that the stresses estimated from the reference stress approach compare well with those from full elastic-creep FE analysis, which are significantly lower than the elastic stress results. Considering time and efforts for full inelastic creep analysis of structures, the reference stress approach is shown to be a powerful tool for creep rupture estimates and also to reduce conservatism of elastic stress analysis significantly.

• Journal of Oriental Neuropsychiatry
• /
• v.33 no.1
• /
• pp.33-48
• /
• 2022

Objectives: Academic stress poses a significant risk for the mental health of medical students, and a feasible group intervention program for managing academic stress is required. The purpose of this study was to examine the clinical effectiveness of emotional freedom techniques (EFT) on the mental health of Korean medical students. Methods: The class of first-year medical school students (n=36) participated in an after-school EFT group intervention program comprising six sessions (15 minutes/session, three weeks) to analyze its clinical effectiveness as a single-group test-retest clinical study. The changes in the Perceived Stress Scale (PSS), Test Anxiety Inventory (TAI), Positive and Negative Affect Schedule (PANAS), and State-Trait Anxiety Inventory (STAI) scores were examined using a paired t-test and Cohen's D at post-EFT and two-week follow-up. Results: There were significant curtailments at post-EFT and follow-up measures in TAI-Total (t=2.704 and t=3.289), TAI-Worry (t=2.297 and t=2.454), TAI-Emotionality (t=2.763 and t=3.654), PSS-Negative Perspective (t=2.659 and t=3.877), and PANAS-Negative Affect (t=2.885 and t=3.259) subscales, however not in PSS-Positive Perspective (t=-1.279 and t=-1.101) and PANAS-Positive Affect (t=0.194 and t=-0.122) subscales. The trait anxiety (t=2.227) was significantly mitigated in the post-EFT measure and the state anxiety (t=2.30) in the follow-up measure. Conclusions: The EFT group intervention alleviated test stress, negative affect, and anxiety in the Korean medical students. This study contributes to an understanding of academic stress and EFT intervention in the competitive environment of medical education.

• Journal of Korean Academy of Nursing
• /
• v.35 no.6
• /
• pp.1183-1189
• /
• 2005

Objectives : This descriptive study was conducted to examine the degree of stress, coping styles, communication with the mother and depression between headache-suffering children and headache-free children and to explore predicted factors for headache occurrence in children. Method : The subjects of this study consisted of 196 headache-free children and 107 headache-suffering children. They were 4th-6th graders of an elementary school in T city. The instruments in this study were David's stressor of children, Lazarus & Folkman's Stress Coping Style, PACI(Parent-Adolescent Communication Inventory) by Barnes & Olsen and Kovac's CDI (Children's depression inventory). Data were collected from May 2 to July 16, 2004. Results : Total stress(t=-3.76, p=.035), school stress(t=-3.02, p=.001), mass media stress(t=-1.39, p=.029) and depression(t=7.62, p=.001) in headache-suffering children were significantly higher than those of headache-free children. Problem-oriented coping skills (t=1.23, p=.023), and the score of communication with the mother(t=2.32, p=.012) in headache-suffering children were lower than those of headache-free children. Logistic regression analysis (stepwise) showed that the most powerful predictor was stressors in school, followed by depression, stressors in mass media and communication with the mother. Conclusions: This study revealed that important factors such as the degree of school stress, depression, the degree of mass media stress, communication with the mother and problem-oriented coping skills should be controlled for reducing of headaches in children.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.144-155
• /
• 2000

초록 The validity, of a single parameter such as stress intensity, factor K or J-integral in traditional fracture mechanics depends strongly on the geometry, and loading condition. Therefore the second parameter like T-stress measuring the stress constraint is additionally needed to characterize the general crack-tip fields. While many, research works have been done to verify, the J-T description of elastic-plastic crack-tip stress fields in plane strain specimens, limited works (especially. for bimaterials) have been performed to describe the structural surface crack-front stress fields with the two parameters. On this background, via detailed three dimensional finite element analyses for surface-cracked plates and straight pipes of homogeneous materials and bimaterials under various loadings, we investigate the extended validity or limitation of the two parameter approach. We here first develop a full 3D mesh generating program for semi-elliptical surface cracks, and calculate elastic T-stress from the obtained finite element stress field. Comparing the J-T predictions to the elastic-plastic stresses from 3D finite element analyses. we then confirm the extended validity of fracture mechanics methodology based on the J-T two parameters in characterizing the surface crack-front fields of welded plates and pipes under various loadings.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.3
• /
• pp.165-169
• /
• 2007

Prediction of fatigue duration is attainable from the analysis of the growth rate of the fatigue crack, and the property of the fatigue crack growth is determined by the calculation of the stress intensity factor. And the evaluation of the stress intensity factor, K comes from the stress analysis of the vicinity of crack tip of the continuum. This study describes a simple method to decide the stress intensity factor for the small crack at the sharp edge notches. The proposed method is based on the similarities between elastic stress fields of the notch tip described by two parameters, the stress concentration factor K, the radius of arc of the notch. And it is applicable to the analysis of the semi-elliptical penetration cracks and the edge notches.

• Structural Engineering and Mechanics
• /
• v.36 no.5
• /
• pp.575-598
• /
• 2010

The shape and size of the plastic zone around the crack tip are analyzed under pure mode I, pure mode II and mixed mode (I+II) loading for small scale yielding and for both plane stress and plane strain conditions. A new analytical formulation is presented to determine the radius of the plastic zone in a non-dimensional form. In particular, the effect of T-stress on the plastic zone around the crack tip is studied. The results of this investigation indicate that the stress field with a T-stress always yields a larger plastic zone than the field without a T-stress. It is found that under predominantly mode I loading, the effect of a negative T-stress on the size of the plastic zone is more dramatic than a positive T-stress. However, when mode II portion of loading is dominating the effect of both positive and negative T-stresses on the size of the plastic zone is almost equal. For validating the analytical results, several finite element analyses were performed. It is shown that the results obtained by the proposed analytical formulation are in very good agreements with those obtained from the finite element analyses.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.27-40
• /
• 1993

High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ ｛n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )｝.exp[｛ $Q_{c}$ $^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)｝/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.

• Journal of Applied Reliability
• /
• v.11 no.4
• /
• pp.319-330
• /
• 2011

We consider the stress-strength model in which a unit of strength $T_2$ is subjected to environmental stress $T_1$. An important measure considered in stress-strength model is the reliability parameter R=P($T_2$ > $T_1$). The greater the value of R is, the more reliable is the unit to perform its specified task. In this article, we consider the situations in which $T_1$ and $T_2$ are both independent and dependent, and have certain bivariate distributions as their joint distributions. To study the effect of dependency on R, we investigate several bivariate distributions of $T_1$ and $T_2$ and compare the values of R for these distributions. Numerical comparisons are presented depending on the parameter values as well.

• The Korean Journal of Emergency Medical Services
• /
• v.12 no.3
• /
• pp.5-15
• /
• 2008

Purpose : This study is a descriptive research to provide basic factors of posttraumatic stress in Firefighters. This study was carried out to develop the effective program for the fire fighters to cope with the posttraumatic stress following the disasters. Methods : The questionnaires were collected among fire fighters who serviced in K and I community from April 1 to June 30 in 2008. Total 304 questionnaires were analyzed by SPSS WIN program for descriptive statistics, Pearson's correlation coefficient and t-test. Results : 1. 48.0% of 300 fire fighters were at the age of 31-40, and 42.3% were under 30. 2. Work burden had a significant difference of 2.30 in low-risk group, 2.60 in high-risk group(t-value=-3.85, p=0.00). However, life event had no significant difference 0.79 event in low-risk group, 1.41 event in high-risk group(t-value=-2.27, p=0.24). 3. Concerning posttraumatic stress factors, there was positive correlation between mobilization impact level r=0.38(P<0.01), work burden r=0.38(p<0.01), and life event r=0.27(p<0.01). 4. According to the Symptom Check List-Revised(SCL-90-R), somatization had a significant differences(t-value=5.46, p=0.00), obsessive-compulsive(t-value=7.16, p=0.00), interpersonal sensitivity(t-value=6.15, p=0.00), depression(t-value=6.62, p=0.00), anxiety (t-value=7.33, p=0.00), hostility(t-value=5.94, p=0.00), phobia anxiety(t-value=6.85, p=0.00), paranoid ideation(t-value=5.55, p=0.00), psychotism(t-value=6.52, p=0.00) in low-risk and high-risk group. Conclusion : As a consequence, mobilization impact, work burden, and life event were the influential factors on posttraumatic stress. Also, high-risk group revealed significantly higher score on all 9 scales. The information obtained from surveys made recommendation to develop the intervention of stress management to control mobilization impact and posttraumatic stress.