• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.226-231
• /
• 2001

The purpose of this paper is to propose the experimental method of thermal properties of Phase Change Materials (PCMs) by using T-history method. As far, in order to measure the heat of fusion and specific heat of PCMs, conventional thermal analysis methods such as DSC and DTA have been used. Because these methods test very small samples, thermal properties of samples are usually different from those of materials consisting of several components. For these reasons, T-history method, the simple measurement method of the heat of fusion and specific heat of PCMs have been performed. In this paper, we investigated the thermal properties of low temperature PCMs(below $0^{\circ}C$) under the charging process by using T-history method. The results are compared to those of DSC method. The T-history method will be useful for selection of the best PCM from lots of candidates and development of new PCMs.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.489-494
• /
• 2013

In analysis of power transformer loss using calculation of magnetic field, Finite element method is commonly used. When using this method, calculation of magnetic field needs the very large number of elements and the performance of common work station is not sufficient to calculate the magnetic fields. In addition, the definition of boundary conditions may arise. However, When using Integral equation method, only ferromagnetic materials need to be modeled, since the domain is infinite. All the space in which the primary and secondary sources exist is regarded as free(${\mu}={\mu}_0$).

• Korean Journal of Radiology
• /
• v.22 no.8
• /
• pp.1352-1368
• /
• 2021

Objective: For an accurate dynamic contrast-enhanced (DCE) MRI analysis, exact baseline T1 mapping is critical. The purpose of this study was to compare the pharmacokinetic parameters of DCE MRI using synthetic MRI with those using fixed baseline T1 values. Materials and Methods: This retrospective study included 102 patients who underwent both DCE and synthetic brain MRI. Two methods were set for the baseline T1: one using the fixed value and the other using the T1 map from synthetic MRI. The volume transfer constant (K^trans), volume of the vascular plasma space (v_p), and the volume of the extravascular extracellular space (v_e) were compared between the two methods. The interclass correlation coefficients and the Bland-Altman method were used to assess the reliability. Results: In normal-appearing frontal white matter (WM), the mean values of K^trans, v_e, and v_p were significantly higher in the fixed value method than in the T1 map method. In the normal-appearing occipital WM, the mean values of v_e and v_p were significantly higher in the fixed value method. In the putamen and head of the caudate nucleus, the mean values of K^trans, v_e, and v_p were significantly lower in the fixed value method. In addition, the T1 map method showed comparable interobserver agreements with the fixed baseline T1 value method. Conclusion: The T1 map method using synthetic MRI may be useful for reflecting individual differences and reliable measurements in clinical applications of DCE MRI.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.2
• /
• pp.127-134
• /
• 2009

T-splines are recently proposed geometric modeling tools. A T-spline surface is a NURBS surface with T-junctions and is defined by a control grid called T-mesh. Local refinement can be performed very easily for T-splines while it is limited for B-splines or NURBS. Using T-splines, patches with unmatched boundaries can be combined easily without special technique. In this study, the analysis methodology using T-splines is proposed. In this methodology, T-splines are used both for description of geometries and for approximation of solution spaces. Two-dimensional linear elastic and dynamic problems will be solved by employing the proposed T-spline finite element method, and the effectiveness of the current analysis methodology will be verified.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.11
• /
• pp.941-947
• /
• 2002

Two methods of constructing T-S fuzzy model which is equivalent to a given nonlinear system are presented. The first method is to obtain an equivalent T-S fuzzy model by using the sum of linearly independent scalar functions with constant real matrix coefficients. The sum of products of linearly independent scalar functions is used in the second method. The former method is to formulate the procedures of T-S fuzzy modeling dealt in many examples of previous publications; the latter is a new method. By comparing the number of linearly independent functions used in the two methods, we can easily find out which method makes fewer rules than the other. The nonlinear dynamics of an inverted Pendulum on a cart is used as an equivalent T-5 fuzzy modeling example.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.1
• /
• pp.25-35
• /
• 2013

Automatically deriving only individual don't-care minterms that can effectively reduce a Boolean logic expressions are being investigated. Don't-care conditions play an important role in optimizing logic design. The type of unknown don't-care minterms that can always reduce the number of product terms in Boolean expression are referred as single hypothetical don't-care (S-HDC) minterms. This paper describes the Quasi Quine-McCluskey method that systematically derives S-HDC minterms. For the most part, this method is similar to the original Quine-McCluskey method in deriving the prime implicants. However, the Quasi Quine-McCluskey method further derives S-HDC minterms by applying so-called a combinatorial comparison operation. Upon completion of the procedure, the designer can review generated S-HDC minterms to test its appropriateness for a particular application.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.64-69
• /
• 2023

We devise a collaboration construction method based on the SPRT (Sequential Probability Ratio Test) for malware detection in IoT. In our method, high-end IoT nodes having capable of detecting malware and generating malware signatures harness the SPRT to give a reward of malware signatures to low-end IoT nodes providing useful data for malware detection in IoT. We evaluate our proposed method through simulation. Our simulation results indicate that the number of malware signatures provided for collaboration is varied in accordance with the threshold for fraction of useful data.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.208-217
• /
• 2003

In order to construct the extrusion die surface of T -shaped sections, an automatic surface construction method based on NURBS surface and area mapping method is proposed in the present work. In the present study, a center point for area mapping is determined by introducing the mapping concept based on constant area proportionality between original billet and final product. The characteristic points of inlet profile are determined using the traditional area mapping method and the root finding numerical method. The inlet and outlet profiles are precisely described with NURBS curves using the characteristic points of entry and exit sections. For the construction of NURBS surface, an interpolation method for the pre-determined two section curves has been developed to be used in the generation of interior control points and weights. To show the validity of the proposed method, automatic die surface generation is carried out for the T-shaped section and T-shaped section with rounded corners.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.57-63
• /
• 2018

IoT devices are used in many areas to perform various roles and functions in a cloud environment. However, a method of access control that can stably control the IoT device has not been proposed yet. In this paper, we propose a hierarchical multi-level property access control scheme that can perform stable access of IoT devices used in a cluster environment. In order to facilitate the access of the IoT device, the proposed method not only provides the ID key (security token) unique to the IoT device by providing the IoT Hub, but also allows the IoT Hub to authenticate the X.509 certificate and the private key, So that the private key of the IoT device can not be seen outside the IoT device. As a result of the performance evaluation, the proposed method improved the authentication accuracy by 10.5% on average and the processing time by 14.3%. The overhead of IoT Hub according to the number of IoT attributes was 9.1% lower than the conventional method.

• Journal of the Korean Statistical Society
• /
• v.34 no.3
• /
• pp.245-261
• /
• 2005

The marginal distribution of X is considered when (X, Y) has a truncated bivariate t-distribution. This paper mainly focuses on the marginal nontruncated distribution of X where Y is truncated below at its mean and its observations are not available. Several properties and applications of this distribution, including relationship with Azzalini's skew-normal distribution, are obtained. To circumvent inferential problem arises from adopting the frequentist's approach, a Bayesian method utilizing a data augmentation method is suggested. Illustrative examples demonstrate the performance of the method.