• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.84-84
• /
• 2020

새만금은 농업용지 확보 등 다양한 용도의 토지이용을 목적으로 방조제 공사를 수행하였으며, 새만금 종합개발계획(Master Plan, OPC, 2011)에 의하여 호내의 준설을 계획하고 있다. 그러나 방조제 준공 후 새만금 호내의 수질오염 문제가 지속적으로 발생되어 왔다. 수질오염의 문제를 해결하기위해서 강변저류지 설치, 하수종말 처리장 등 다양한 구조적 대책이 수립되고 시행되었지만, 수질개선 효과는 상대적으로 미비하였다(Kim et al, 2016; KRCC, 2016). 본 연구에서는 새만금 호내의 수질개선을 위하여, 다양한 배수갑문 운영에 따른 수질인자의 잔존률 및 하상의 변화를 SCHISM-CoSiNE(Semi-implicit Cross-scale Hydroscience Integrated System Model and Carbon, Silicate, Nitrogen Ecosystem model) 모형을 통하여 검토하고자 한다. 수치모형의 하상변동 및 수질변화에 대한 정확한 수치계산 여부를 판단하기 위하여 van Rijn(1987) 실험 및 새만금호내의 수질 관측자료(DO, T-N, T-P, 온도, 염도, 새만금유역 통합환경관리시스템)를 이용하여 수치모형 검증을 수행하였고 10% 이내의 오차를 나타내었다. 배수갑문 운영기록(Jeong et al., 2018)을 참조하여 배수갑문 운영을 재현하였으며, 지형은 기 수립된 MP 내 새만금 종합개발계획이 완료된 시점인 2030년을 기준으로 하였다. 수치모의를 통하여, 배수갑문 운영 및 계절의 변화에 따른 최심 하상변동고 변화 및 하상변동량을 확인하여 침식 퇴적 구간을 구분하였고, 호내의 잔존하는 수질인자의 농도를 통하여 수질개선 효과를 평가하여 수질측면에서 최적의 배수갑문 운영방안을 제시하였다. 본 연구는 배수갑문 운영이 새만금 호내의 수질 및 지형에 미치는 영향에 대한 기초적인 연구이지만 향후에는 다양한 수질인자 및 시나리오를 고려한다면 보다 근본적인 수질오염 해결방안으로 활용이 가능할 것으로 판단된다.

• Journal of the Korean Society of Costume
• /
• v.22
• /
• pp.205-224
• /
• 1994

It was aimed to study the costume of Koryo dynasty based upon the thirty pictures of Bud-dha to hang on the wall among the existing Buddist paintings. The costume to study were made about 64 years during the King Chung-yol(1286) to the King Chung-jong(1350) which style was mostly related in Won Dynasty. 가) Men's wear ; 1. Hair style and hair dress ; Man tied up a top knot and they put on the hat such as a Kuan Kun and Mo. The young boys binds his hair up one, two, and three knot-s, and tied up with a hair ribbon, A kinds of Kuan-mo were Mine-lu-kuan Yuan-yu-kuan, Nong-kuan, Hae-chi-kuan Pok-du Yun-wha-kuan Yip-mo- and Tu-ku(Helmeto) 2. clothes ; 1) Colour of Koryo King's Mien-ku Kuan costume was not agree with blue and reddish black colour which was used in Yo, Song, Kum and Won Dynasty, however black and greenhish blue colour was agreed with. 2) The king wore T'ung-t'ien-kuan(Yuan-yu-kuan) and the government officials wore Chin-hien-kuan Hae-chi-kuan and Nong-kuan as a court dress. In general the king and the Crown Prince wore a hats which was used in T'ung-t'ien system however sometimes they wore small hats which was cited in literature. 3) Gate guard and upper garment wore colourful costume figured gold colour pattern which was distin-gtive costume system of Koryo. 4) A monk wore big sleeve long skirt big sleeve long jacket long skirt and shoulder scar-f full shoulder scarf or right hand shoulder opened scarf. 5) The Soldiers wore helmet shoulder or scarf pee-back hung-kap, pok-kap, yang-dan-g-kap we-yu-kap kun-kap, and boots and they carried arms. 6) The young boys wore scarf, loin cloth, long skirt, belt neckless, wan-silk, boots and foots wear and wristless. 나) Women's wear ; 1. Hair style and hairs and tied up with a hair ribbon and wore precious ston decorated hair dress wheel shape hair dress pan shaped head dress handkerchif covered hair dress decorated precious stone hair pin silk chippon made of head dress muf-fler shaped hairdress. Boots mocasin hae lee, suk and sandle wored as a shoes depends on the classes. They wore neckless, earing wres-tless and wan-pu-sik. 2. Closthe 1) High rank lade's wore un-kyun attached jacket and jacket sleeves decorated pleats and pleats decorated long skirt apron back apron knot belt, scarf this type is the same with Dang Dynasty five dynasty of china Song, Kum Won, Myung Dynasty and our cos-tume of Poe-hae, and Shilla Dynasty.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.430-439
• /
• 2004

This paper describes a design of 8192/2048-point FFT/IFFT processor (CFFT8k2k), which performs multi-carrier modulation/demodulation in OFDM-based DVB-T receiver. Since a large size FFT requires a large buffer memory, two design techniques are considered to achieve memory-efficient implementation of 8192-point FFT/IFFT. A hybrid structure, which is composed of radix-4 single-path delay feedback (R4SDF) and radix-4 single-path delay commutator (R4SDC), reduces its memory by 20% compared to R4SDC structure. In addition, a memory reduction of about 24% is achieved by a novel two-step convergent block floating-point scaling. As a result, it requires only 57% of memory used in conventional design, reducing chip area and power consumption. The CFFT8k2k core is designed in Verilog-HDL, and has about 102,000 Bates, RAM of 292k bits, and ROM of 39k bits. Using gate-level netlist with SDF which is synthesized using a $0.25-{\um}m$ CMOS library, timing simulation show that it can safely operate with 50-MHz clock at 2.5-V supply, resulting that a 8192-point FFT/IFFT can be computed every 164-${\mu}\textrm{s}$. The functionality of the core is fully verified by FPGA implementation, and the average SQNR of 60-㏈ is achieved.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.3
• /
• pp.465-475
• /
• 2022

Due to the impact of COVID-19, people are paying attention to convenience and health, and the use of IoT devices to help them is increasing. In order to embed a lightweight security element in IoT devices that need to handle sensitive information even with limited resources, the development of a lightweight S-box is essential. Until 2021, it was common to develop a lightweight 4-bit S-box by a heuristic method, and to develop an extended structure or repeat the same operation for a larger size lightweight S-box. However, in January 2022, a paper that proposed a heuristic algorithm to find an 8-bit S-box with better differential uniformity and linearity than the S-box generated with an MISTY extended structure, although non-bijective, was published [1]. The heuristic algorithm proposed in this paper generates an S-box by adding AND operations one by one. Whenever an AND operation is added, they use a method that pre-removes the S-box for which the calculated differential uniformity does not reach the desired criterion. In this paper, we improve the performance of this heuristic algorithm. By increasing the amount of pre-removal using not only differential uniformity but also other differential property, and adding a process of calculating linearity for pre-removing, it is possible to satisfy not only differential security but also linear security.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.679-682
• /
• 2005

Negative-differential conductance (NDC) characteristics as well as negative-differential trans-conductance (NDT) characteristics have been observed in the room temperature I-V characteristics of Field-induced Inter-band Tunneling Effect Transistors (FITETs). These characteristics have been explained with inter-band tunneling physics, from which, inter-band tunneling current flows when the energy bands of degenerately doped regions align, and it does not flow when they don't. FITET is an SOI device and the body region is not directly connected to the external terminal. Therefore, Fermi energy in the body region is determined by electrical coupling among four regions - gate, source, drain and substrate. So, a quasi Fermi energy of the majority carriers in the floating body region can be changed by external voltages, and this causes the energy band movements in the body region, which determine whether the energy bands between degenerately doped junctions aligns or not. This is a key point for an explanation of NDT and NDC characteristics. In this paper, a quasi Fermi energy movement in the floating body region of FITET was investigated by a device simulation. This result was applied for the description of relation between quasi Fermi energy in the body region and external gate bias voltage.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.8-15
• /
• 2006

In this paper, the 94 GHz, low conversion loss, and high isolation single balanced mixer is designed and fabricated using GaAs-based metamorphic high electron mobility transistors (MHEMTs) with 70 nm gate length and the hybrid ring coupler with the micromachined transmission lines, dielectric-supported air-gapped microstrip lines (DAMLs). The 70 nm MHEMT devices exhibit DC characteristics with a drain current density of 607 mA/mm an extrinsic transconductance of 1015 mS/mm. The current gain cutoff frequency ($f_T$) and maximum oscillation frequency ($f_{max}$) are 320 GHz and 430 GHz, respectively. The fabricated hybrid ring coupler shows wideband characteristics of the coupling loss of $3.57{\pm}0.22dB$ and the transmission loss of $3.80{\pm}0.08dB$ in the measured frequency range of 85 GHz to 105 GHz. This mixer shows that the conversion loss and isolation characteristics are $2.5dB{\sim}>2.8dB$ and under -30 dB, respectively, in the range of $93.65GHz{\sim}94.25GHz$. At the center frequency of 94 GHz, this mixer shows the minimum conversion loss of 2.5 dB at a LO power of 6 dBm To our knowledge, these results are the best performances demonstrated from 94 GHz single balanced mixer utilizing GaAs-based HEMTs in terms of conversion loss as well as isolation characteristics.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.70-75
• /
• 2014

Recently, the demand for high-integrated, low-powered, and high-powered SoC design has been increasing due to the multi-functionality and the miniaturization of digital devices and the high capacity of service informations. With the rapid evolution of the system, the required hardware performances have become diversified, the FPGA system has been increasingly adopted for the rapid verification, and SoC system using the FPGA and the ARM core for control has been growingly chosen. While the AXI bus is used in these kinds of systems in various ways, it is traditionally designed with AXI slave structure. In slave structure, there are problems with the CPU resources because CPU is continually involved in the data transfer and can't be used in other jobs, and with the decreased transmission efficiency because the time not used of AXI bus beomes longer. In this paper, an efficient AXI master interface is proposed to solve this problem. The simulation results show that the proposed system achieves reductions in the consumption clock by an average of 51.99% and in the slice by 31% and that the maximum operating frequency is increased to 107.84MHz by about 140%.

• Journal of Animal Science and Technology
• /
• v.53 no.6
• /
• pp.533-540
• /
• 2011

The objectives of experiments were to compare directly the effects of synchrony of slowly fermented (corn and corn gluten meal; C-CGM) and of rapidly fermented ingredients (barley and soybean meal; B-SBM) in the rumen on starch disappearances in gastrointestinal tracts (Experiment 1) and growth performance (Experiment 2) of Hanwoo steers in the feedlot barn. In experiment 1, four Hanwoo steers ($288{\pm}21$ kg) fitted with ruminal and "T" shaped duodenal cannula were placed in one pen with Calan gate and assigned randomly to a duplicate $2{\times}2$ Latin square design. In experiment 2, eight intact Hanwoo steers ($311{\pm}8$ kg) were assigned randomly to one of two pens with Calan gate to evaluate the effect of the same diets as like in experiment 1 on growth performance. There were no differences in ruminal pH, ammonia and total VFA concentrations between treatments. Percentage of apparent ruminal starch disappearance was 33.3% unit lower (p<0.05) for steers fed C-CGM than for steers fed B-SBM diets and this difference resulted in 268% higher (p<0.05) in duodenal starch flows for steers fed C-CGM diet than for steers fed B-SMB diet. There was significant increase (p<0.05) in quantity (927 vs. 400 g/d) of corn starch digested post-ruminally compared to barley starch. However, percentage of starch apparently digested post-ruminally was 8% higher (p=0.1) in steers fed fast synchrony diet with B-SBM than in steers fed slow synchrony diets with C-CGM. The differences of percentage and amount of starch apparently digested post-ruminally between C-CGM and B-SBM diets did not affect rice straw DM intake, average daily gain (ADG) and feed efficiency. In conclusion, there is some uncertainty in regards to the relationship between site of starch digestion and DM intake, ADG, and feed efficiency in this study.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.464-476
• /
• 2019

Objectives: This study aimed to assess the exposure levels of tollbooth workers to diesel particulate matter using black carbon (BC) and to find the correlations among variables associated with BC using the motor vehicle management act regulated by the Ministry of Land, Infrastructure and Transport. Methods: This study was performed over 14 days at a university in Seoul. BC levels were monitored using an aethalometer and were conducted around the breathing zones of the workers. There were three sampling locations: inside the tollbooth (front gate and rear gate) and an office as a control group. T-test, correlation, and multiple linear regression analysis were performed using SPSS. Results: The geometric mean (GM) of BC_30min concentrations in the exposure group was 2.44 ㎍/㎥, approximately 1.4 times higher than the control group (1.75 ㎍/㎥). The GM of BC_30min concentrations was 2.75 ㎍/㎥ during the heavy traffic time (9-10 am) and 2.30 ㎍/㎥ during non-heavy traffic times (p<0.001). The multiple linear regression analysis shows that the number of all types of vehicles and PM_2.5 concentrations in the atmosphere were factors increasing the GM of BC(ln(BC_30min)) concentrations (adjusted R²=0.42, p<0.001). The workers were constantly exposed to low concentrations (GM of BC_30min=2.44 ㎍/㎥), but they were exposed to peak concentrations instantly (BC_10sec=3545.04 ㎍/㎥). When the GM of BC_30min concentrations was momentarily represented as high, it was identified that a vehicle mainly using diesel fuel or an aging vehicle had passed. Conclusions: A ventilation system should be installed in the closed tollbooth or aging vehicles should be controlled so as not to pass tollbooths.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.304-313
• /
• 2018

Agricultural land reclamation in Saemangeum tidal land project is mostly planned to be completed by 2020. Irrigation water for the land is required to be prepared by that time. However, water quality for the irrigation sources is barely meet the target concentration. This paper described the reduction effect of and policy consideration for best management practices (BMPs) which were fertilizer prescription by soil test (SO#1), mixed application of SO#1 and 3 (SO#2), drainage gate control (SO#3), time-release fertilizer application (SO#4), and control (CT). Reduction of paddy runoff was relatively higher in SO#3 (25%) and SO#1 (27%) while lower in SO#4 (9%) and SO#2 (7%) than that in CT. In addition, farmers promised to follow the BMP guidelines but they didn't because of the several problems caused for the BMPs implementation. Thus, it recommended developing an automated control of irrigation gate and paddy water depth and supporing farmers for NPS pollution control and irrigation water reduction.