• 전기학회논문지
• /
• 제64권6호
• /
• pp.891-899
• /
• 2015

This paper presents the robust stability condition of uncertain Takagi-Sugeno(T-S) fuzzy systems with time-varying delay. New augmented Lyapunov-Krasovskii function is constructed to ensure that the system with time-varying delay is globally asymptotically stable. Also, less conservative delay-dependent stability criteria are obtained by employing some integral inequality, reciprocally convex approach and new delay-partitioning method. Finally, two numerical examples are provided to demonstrate the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.445-445
• /
• 2000

This paper proposes the MIMO indirect adaptive fuzzy controller to control the two-link manipulators. The input-output linearization technique, equivalent control input plus integral term, augmented error model and recursive least square adaptive law are used fer the controller. The linear type of fuzzifier-defuzzifier fuzzy logic system used for nonlinear function makes easy to farm the error model and able to follow the adaptive system approach. Such that control approach, the control system is not required joint speed and accerelation measurement and easy to implement and tune. The simulation results showed that the proposed controller has good control performance, stability, very small tracking error, decoupling, fast convergence, robust to parameter variation and load.

• Smart Structures and Systems
• /
• 제29권4호
• /
• pp.617-624
• /
• 2022

A new intelligent adaptive control scheme was proposed that combines the control based on interference observer and fuzzy adaptive s-curve for flight path tracking control of unmanned aerial vehicle (UAV). The most important contribution is that the control configurations don't need to know the uncertainty limit of the vehicle and the influence of interference is removed. The proposed control law is an integration of fuzzy control estimator and adaptive proportional integral (PI) compensator with input. The rated feedback drive specifies the desired dynamic properties of the closed control loop based on the known properties of the preferred acceleration vector. At the same time, the adaptive PI control compensate for the unknown of perturbation. Additional terms such as s-surface control can ensure rapid convergence due to the non-linear representation on the surface and also improve the stability. In addition, the observer improves the robustness of the adaptive fuzzy system. It has been proven that the stability of the regulatory system can be ensured according to linear matrix equality based Lyapunov's theory. In summary, the numerical simulation results show the efficiency and the feasibility by the use of the robust control methodology.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2170-2178
• /
• 2015

This paper presents the effective and reliable speed control of PMDC motors under variable loads and reference speeds. As is known DC motors are more preferred in industrial practices. This is that, the PMDC motors don’t require brush and commutator care and to increase in torque per motor depending on developments in power electronics. In this study, proportional-integral controller (PI) and fuzzy logic controller (FL) have been designed for speed control of PMDC motor. In the design of these controllers, characteristics such as minimum overrun time, response time to the load, settling time and ideal rise time have been taken into consideration for better stability performance. In this design, the best system response was searched by examining the effect of different defuzzification methods onto the fuzzy logic system response. In conclusion, it has been seen that FL controller has a better performance for variable speed-load control of PMDC motor compared to PI controller.

• 한국IT서비스학회지
• /
• 제8권4호
• /
• pp.175-185
• /
• 2009

Objectifying claims filed during the warranty period, analyzing the current circumstances and improving on the problem in question is an activity worth doing that could reduce the likelihood of claims to occur, cut down on the costs, and enhance the corporate image of the manufacturer. Existing analyses of claims are confronted with two problems. First, you can't precisely assess the risks of claims involved by means of the value of claims per 100 products alone. Second, even in a normal state, the existing approach fails to capture the probabilistic conflicts that escape the upper control limit of claims, thus leading to wrong control activities. To solve the first problem, this paper proposed that a time series detection concept where the claim rate is monitored based on the date when problems are processed and a hazard function for expression of the claim rate be utilized. For the second problem, this paper designed a model whereby to define a normal state by making use of PID (Proportion, Integral, Differential) and infer by way of a fuzzy concept. This paper confirmed the validity and applicability of the proposed approach by applying methods suggested in the actual past data of warranty claims of a large-scaled automotive firm, unlike hypothetical simulation data, in order to apply them directly in industrial job sites, as well as making theoretical suggestions for analysis of claims.

• 한국정보처리학회논문지
• /
• 제6권9호
• /
• pp.2365-2372
• /
• 1999

재사용도 측정 모델은 다음 조건을 만족해야 한다. 1) 측정 속성(척도)들과 컴포넌트들을 쉽게 삽입 삭제할 수 있어야 한다. 2) 타당성에 근거하여 컴포넌트들을 정량적으로 평가할 수 있어야 한다. 3) 가정된 지식을 요구하지 않아야 한다. 4) 각 측정 속성들의 중요도를 객관적으로 산출할 수 있어야 한다. 따라서 본 논문에서는 위의 조건들을 만족시킬 수 있는 재사용 컴포넌트들의 재사용도 측정 모델을 제안한다. 제안된 모델은 적합한 측정 인자들을 선택하고, 러프집합을 이용하여 그들의 중요도를 산출한다. 다음으로 컴포넌트의 재사용도를 측정하기 위해서, 퍼지 적분을 이용하여 측정 인자들의 중요도와 측정값을 종합한다. 마지막으로 기능 중심 컴포넌트들에 제안된 모델을 적용하고, 통계적 방법으로 모델의 타당성을 보인다.

• 한국정보통신학회논문지
• /
• 제19권7호
• /
• pp.1694-1704
• /
• 2015

본 논문에서는 병렬 분산 보상 (PDC) 제어와 적분 슬라이딩 모드 제어 (ISMC)를 결합하여 바퀴형 이동 로봇의 강인한 궤도 추적 제어 방법을 새롭게 제안한다. PDC 제어 방법은 다른 비선형 제어 방법에 비해 비교적 간단하고 사용이 편리하다. 그리고 ISMC는 상태 변수들을 원하는 공칭 동특성을 갖는 슬라이딩 평면에 배치함으로써 초기 순간부터 모델 불확실성 및 외란에 대해 강인하고 안정적인 제어 특성을 갖게 할 수 있다. 그러므로 제안된 PDC+ISMC 궤도 추적 제어 방법은 외란에도 불구하고 강인한 궤도 추적 제어 성능을 보여준다. 제안된 궤도 추적 방법에 대해 시뮬레이션을 통하여 외란이 있는 경우의 궤도 추적 성능을 확인하였다. 제안된 방법은 외란이 증가하더라도 외란이 없을 때의 PDC 제어 방법에 의한 궤도 추적 성능을 유지하였다. 그러나 PDC 궤도 추적 방법은 외란의 크기가 증가하면 제안된 방법과는 달리 궤도 추적 오차가 크게 증가함을 알 수 있었다.