• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.117-126
• /
• 2011

The buckling assessment of plate panels described in common structural rules (CSR) is to be determined according to the buckling utilization factor with hull girder stresses calculated on net hull girder sectional properties. As the thickness requirement for the buckling assessment of plate panels is not explicitly given in CSR, a lot of time is spent to find the proper thickness of plate panels until reaching to an allowable buckling utilization factor. In this study, in order to reduce time and cost, the thickness requirement of plate panels satisfying buckling assessment was derived. The structural design system included with the thickness requirement for buckling assessment was developed. The system is called as Oil-tanker Automated Structural Investigation System (OASIS). The design result of longitudinal strength members using OASIS was verified by Nauticus Hull which is the rule scantling software of DNV. Finally, optimum design of a double hull tanker for the minimum weight using OASIS was presented.

• 한국시뮬레이션학회논문지
• /
• 제26권1호
• /
• pp.47-54
• /
• 2017

본 논문에서는 3차원 전자파 해석 툴인 Microwave Studio(MWS)와 Matlab을 이용한 케이블 누화 시뮬레이션 방법에 대해 소개하고 이를 이용하여 항공 및 군용에 사용되는 Twisted Wire Pair(TWP)로 구성된 케이블 조립체의 누화특성을 분석한다. TWP는 한 방향으로 길게 꼬여있는 구조로 3차원 전자파 해석 툴만을 이용하여 분석 시 Mesh의 기하급수적인 증가로 인해 메모리가 많이 필요해 해석이 불가능한 경우가 발생한다. 전달행렬(Transmission Matrix)은 주기적인 구조를 해석하는데 효율적이며, 단위 구조 결과를 캐스케이딩(Cascading)하여 전체 구조의 해석을 빠른 시간에 할 수 있어 구조가 반복적인 케이블 시뮬레이션에 적합하다. 본 논문에서는 케이블 누화 시뮬레이션 방법을 이용하여 케이블 조립체를 직선구간을 포함된 TWP로 모델링 하여 누화 특성을 분석하였다.

• 천문학회보
• /
• 제39권1호
• /
• pp.54.1-54.1
• /
• 2014

Kyung Hee University has been developing a CubeSat for the space science mission called SIGMA (Scientific cubesat with Instrument for Global Magnetic field and rAdiation), which includes TEPC (Tissue Equivalent Proportional Counter) and a magnetometer. SIGMA has a 3-unit CubeSat, and the weight is about 3.2 kg. The main payload is TEPC which can measure the Linear Energy Transfer (LET) spectrum and calculate the equivalent dose for the complicated radiation field in the space. The magnetometer is a secondary payload using a miniaturized fluxgate magnetometer. We expect it to have a 1 nT resolution in the dynamic range of ${\pm}65535$ nT. An Attitude Control System (ACS) spins the SIGMA spacecraft 4 rpm with the spin axis perpendicular to the ecliptic plane. Full duplex communication is consists of VHF uplink and S-band and UHF downlink. In this paper, we introduce the system design and the scientific purpose of the SIGMA CubeSat mission.

• 한국자기학회지
• /
• 제14권4호
• /
• pp.120-126
• /
• 2004

DC 마그네트론 스파터링 방법으로 제작한 F $e_{84}$ N $b_{16}$ (wt.%) 박막의 온도변화에 따른 자기적 특성을 강자성 공명 흡수선의 거동을 통하여 고찰했다 모든 온도영역에서 다수의 체적 모드 스핀파와 한 개 또는 두 개의 표면 모드가 관측되었는데, 이와 같은 현상은 시편 양면의 표면 자기 이방성이 0보다 작은 경우에 나타나는 특성이다. 113-293K 온도영역에서 포화자화는 Bloch의 $T^{2}$ 3/ 법칙과 부합되는 모습을 보였으며, 분광학적 분리인자는 온도변화에 비교적 작은 변화 폭을 보였다 233-293K 온도구간에서 기판과 접하는 시편면의 표면 자기 이방성 상수 Ksl는 온도감소에 따라 그 갈이 비교적 큰 폭으로 증가하는 특성을 나타냈다. 그리고 공기와 접하는 시편면의 표면 자기 이방성 상수 $K_{sl}$ 은 상온에서 -0.322 erg/$\textrm{cm}^2$인 값을 보이다가, 온도가 253 K로 내려가면 -0.394 erg/$\textrm{cm}^2$로 감소한 후, 그 이하의 온도영역에서는 온도에 비교적 둔감한 특성을 보였다.

• 한국전자파학회논문지
• /
• 제18권5호
• /
• pp.553-562
• /
• 2007

본 논문에서는 극저주파 자계 세기를 원격으로 측정하기 위한 장치를 설계하고 제작하였다. 자계 측정기는 자계를 등방적으로 측정하기 위하여 3축 자계 센서를 사용하였으며, 측정 대역내 주파수에서 주파수 특성을 보상하기 위하여 등화기를 사용하였다. 3축 자계 센서의 출력 신호를 시간적으로 다중화 시켜, 3축간 균일한 이득 및 주파수 특성을 얻었다. 자계 측정 레벨 범위는 $0.01{\sim}10.0\;uT$이며, 측정 주파수 대역은 $40{\sim}180\;Hz$이 되도록 설계하였다. 제어 시스템은 무선으로 자계 측정기에 접근하며, 최대 접근 거리는 1.0 km이다. 제작된 장치의 측정 레벨 오차는 5% 이내이다. 제작된 장치는 고전압 송전선이 지나는 골프 연습장에 설치되었다.

• 한국정보통신학회논문지
• /
• 제11권6호
• /
• pp.1115-1121
• /
• 2007

이온 빔 스퍼터법을 이용하여 저속성장으로 동시 증착에 의해 $Bi_2Sr_2Ca{_{n-1}}Cu_nO_x$(n=0,1,2) 박막을 제작하였다. Bi 2212 상은 기판온도 $750{\sim}795^{\circ}C$의 범위에서 나타났으며, $750^{\circ}C$보다 저온 측에서는 Bi 2201의 단일상이 존재하였다. 그러나, 조성과 관계되는 $PO_3$은 압력 변화에 대해서는 관찰되지 않았다. 그리고 $45{\sim}90K$의 임계온도(Tc)를 갖는 c축 배향한 고품질의 Bi 2212 박막을 얻었다. 소수의 박막에서는 소량의 CuO가 불순물로 관찰되었으며, 얻어진 모든 박막에서 $CaCuO_2$ 의 불순물 상은 관찰되지 않았다.

• 대한금속재료학회지
• /
• 제50권8호
• /
• pp.569-573
• /
• 2012

In order to understand the difference in SiC deposition between the $CH_3SiCl_3-H_2$ and $C_3H_8-SiCl_4-H_2$ systems, we calculate the phase stability among ${\beta}$-SiC, graphite and silicon. We constructed the phase-diagram of ${\beta}$-SiC over graphite and silicon via computational thermodynamic calculation considering pressure (P), temperature (T) and gas composition (C) as variables. Both P-T-C diagrams showed a very steep phase boundary between the SiC+C and SiC region perpendicular to the H/Si axis, and also showed an SiC+Si region with a H/Si value of up to 6700 in the $C_3H_8-SiCl_4-H_2$, and 5000 in the $CH_3SiCl_3-H_2$ system. This difference in phase boundaries is explained by the ratio of Cl to Si, which is 4 for the $C_3H_8-SiCl_4-H_2$ system and 3 for the $C_3H_8-SiCl_4-H_2$ system. Because the C/Si ratio is fixed at 1 in the $CH_3SiCl_3-H_2$ system while it can be variable in the $C_3H_8-SiCl_4-H_2$ system, the functionally graded material is applicable for better mechanical bonding during SiC coating on graphite substrate in the $C_3H_8-SiCl_4-H_2$ system.

• The Korean Journal of Physiology and Pharmacology
• /
• 제23권6호
• /
• pp.449-458
• /
• 2019

Retinoblastoma (Rb) is one of the most common eye malignancies occur in childhood. The crucial roles of non-coding RNAs, particularly long non-coding RNAs (lncRNAs) and microRNAs (miRNAs), have been widely reported in Rb progression. In the present study, we found the expression of lncRNA T-cell leukemia/lymphoma 6 (TCL6) was significantly downregulated in Rb tissues and cell lines. Knockdown of lncRNA TCL6 promoted cell proliferation while reduced cell apoptosis in Rb cells. Moreover, lncRNA TCL6 serves as a sponge for miR-21, a previously-reported oncogenic miRNA in Rb, by direct targeting to negatively regulated miR-21 expression, therefore modulating Rb proliferation through miR-21. TCL6 overexpression inhibited Rb cell proliferation while miR-21 overexpression exerted an opposing effect; the effect of TCL6 overexpression was partially attenuated by miR-21 overexpression. PTEN/PI3K/AKT signaling pathway was involved in lncRNA TCL6/miR-21 axis modulating Rb cell proliferation. Taken together, lncRNA TCL6 serves as a tumor suppressor by acting as a sponge for miR-21 to counteract miR-21-mediated PTEN repression.

• 대한치과교정학회지
• /
• 제49권3호
• /
• pp.188-193
• /
• 2019

Objective: The aim of this finite element study was to clarify the mechanics of tooth movement in palatal en-masse retraction of segmented maxillary anterior teeth by using anchor screws and lever arms. Methods: A three-dimensional finite element method was used to simulate overall orthodontic tooth movements. The line of action of the force was varied by changing both the lever arm height and anchor screw position. Results: When the line of action of the force passed through the center of resistance (CR), the anterior teeth showed translation. However, when the line of action was not perpendicular to the long axis of the anterior teeth, the anterior teeth moved bodily with an unexpected intrusion even though the force was transmitted horizontally. To move the anterior teeth bodily without intrusion and extrusion, a downward force passing through the CR was necessary. When the line of action of the force passed apical to the CR, the anterior teeth tipped counterclockwise during retraction, and when the line of action of the force passed coronal to the CR, the anterior teeth tipped clockwise during retraction. Conclusions: The movement pattern of the anterior teeth changed depending on the combination of lever arm height and anchor screw position. However, this pattern may be unpredictable in clinical settings because the movement direction is not always equal to the force direction.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1426-1430
• /
• 2018

High magnetic field effects on the microstructure and magnetic properties of $BaFe_{12}O_{19}$ hexaferrites synthesized hydrothermal method have been investigated. The obtained results indicate that the lattice constant decreases gradually as the magnetic field strength increases, which may be attributed to the lattice distortion resulted from the high magnetic field. Polycrystalline $BaFe_{12}O_{19}$ samples prepared under magnetic field strength at zero and 5 T are single phase. It is found that application of external magnetic field during synthesis can induce orientated growth of the hexaferrite crystals along the easy magnetic axis. The magnetic properties can be effectively regulated by an application of high magnetic fields. It is observed that the $BaFe_{12}O_{19}$ prepared under a 5 T magnetic field exhibits a higher room-temperature saturation magnetization (66.3 emu/g) than that of the sample (43.6 emu/g) obtained without magnetic field. The results can be explained as the enhanced crystalline, improvement of $Fe^{3+}$ ions occupancy and the oriented growth induced by the external magnetic field. The growing orientation of particles gives rise to increased coercivity due to the enhancement in shape anisotropy. It is expected that an application of magnetic field during the formation of magnetic nanoparticles could be a promising technique to modify magnetic properties with excellent performance.