• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.375-379
• /
• 2003

In this paper, a novel design of multilayer ceramic-based Transmit/Receive (T/R) switch using Low Temperature Co-fired Ceramic (LTCC) technology have been presented. Compact T/R switch has been designed by transforming quarter-wave transmission line to its lumped equivalent circuit. Especially, high-Q three dimensional inductors with double strip have been proposed and incorporated. The proposed inductor has been modeled by multi-conductor coupled lines. A measured inductor quality factor (Q) of 80 and a Self-Resonance Frequency (SRF) of 6.6 GHz have been demonstrated. The inductor library has been incorporated into the design of WCDMA T/R switch.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.96-99
• /
• 2008

This paper describes a $0.13-{\mu}m$ CMOS RF switch for $3{\sim}5$ GHz UWB band(mode 1). It can improve isolation characteristics between ports by using deep n-well RF devices while their source and body terminals are separated. From the measurement results, the proposed T/R switch is comparative to the on-wafer probing measurement results of the series-shunt T/R switches. When the proposed T/R switch operates as Tx mode, measured insertion loss from Tx to output port is less than 1.5 dB and isolation between Tx and Rx is more than 27 dB for $3{\sim}5$ GHz. Return loss for the Tx port is more than -10 dB and input P1dB is +10 dBm.

• Transactions on Electrical and Electronic Materials
• /
• 제17권5호
• /
• pp.261-269
• /
• 2016

A high-performance transmit/receive (T/R) switch is essential for every radio-frequency (RF) device. This paper proposes a T/R switch that is designed in the CEDEC 0.13 μm complementary metal-oxide-semiconductor (CMOS) technology for 2.4 GHz ISM-band RF applications. The switch exhibits a 1 dB insertion loss, a 28.6 dB isolation, and a 35.8 dBm power-handling capacity in the transmit mode; meanwhile, for the 1.8 V/0 V control voltages, a 1.1 dB insertion loss and a 19.4 dB isolation were exhibited with an extremely-low power dissipation of 377.14 μW in the receive mode. Besides, the variations of the insertion loss and the isolation of the switch for a temperature change from - 25℃ to 125℃ are 0.019 dB and 0.095 dB, respectively. To obtain a lucrative performance, an active inductor-based resonant circuit, body floating, a transistor W/L optimization, and an isolated CMOS structure were adopted for the switch design. Further, due to the avoidance of bulky inductors and capacitors, a very small chip size of 0.0207 mm² that is the lowest-ever reported chip area for this frequency band was achieved.

• ETRI Journal
• /
• 제30권4호
• /
• pp.526-534
• /
• 2008

This paper presents a fully integrated 0.13 ${\mu}m$ CMOS MB-OFDM UWB transmitter chain (mode 1). The proposed transmitter consists of a low-pass filter, a variable gain amplifier, a voltage-to-current converter, an I/Q up-mixer, a differential-to-single-ended converter, a driver amplifier, and a transmit/receive (T/R) switch. The proposed T/R switch shows an insertion loss of less than 1.5 dB and a Tx/Rx port isolation of more than 27 dB over a 3 GHz to 5 GHz frequency range. All RF/analog circuits have been designed to achieve high linearity and wide bandwidth. The proposed transmitter is implemented using IBM 0.13 ${\mu}m$ CMOS technology. The fabricated transmitter shows a -3 dB bandwidth of 550 MHz at each sub-band center frequency with gain flatness less than 1.5 dB. It also shows a power gain of 0.5 dB, a maximum output power level of 0 dBm, and output IP3 of +9.3 dBm. It consumes a total of 54 mA from a 1.5 V supply.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.42-42
• /
• 2003

• Journal of Ginseng Research
• /
• 제47권1호
• /
• pp.117-122
• /
• 2023

Background: Human immunodeficiency virus-1 (HIV-1) that binds to the coreceptor CCR5 (R5 viruses) can evolve into viruses that bind to the coreceptor CXCR4 (X4 viruses), with high viral replication rates governing this coreceptor switch. Korean Red Ginseng (KRG) treatment of HIV-1 infected patients has been found to slow the depletion of CD4+ T cells. This study assessed whether the KRG-associated slow depletion of CD4+ T cells was associated with coreceptor switching. Methods: This study included 146 HIV-1-infected patients naïve to antiretroviral therapy (ART) and seven patients receiving ART. A total of 540 blood samples were obtained from these patients over 122 ± 129 months. Their env genes were amplified by nested PCR or RT-PCR and subjected to direct sequencing. Tropism was determined with a 10% false positive rate (FPR) cutoff. Results: Of the 146 patients naïve to ART, 102 were KRG-naïve, and 44 had been treated with KRG. Evaluation of initial samples showed that coreceptor switch had occurred in 19 patients, later occurring in 38 additional patients. There was a significant correlation between the amount of KRG and FPR. Based on initial samples, the R5 maintenance period was extended 2.35-fold, with the coreceptor switch being delayed 2.42-fold in KRG-treated compared with KRG-naïve patients. The coreceptor switch occurred in 85% of a homogeneous cohort. The proportion of patients who maintained R5 for ≥10 years was significantly higher in long-term slow progressors than in typical progressors. Conclusion: KRG therapy extends R5 maintenance period by increasing FPR, thereby slowing the coreceptor switch.

• 항공우주기술
• /
• 제11권2호
• /
• pp.1-11
• /
• 2012

본 논문은 우주용 X-대역 능동 위상 배열 레이더를 위한 T/R 모듈에 대하여 기술한다. T/R 모듈은 위상 배열 안테나의 전자적 빔 조향을 가능하게 하는 송수신 RF 반도체 소자가 집적된 모듈이며 SAR 탑재체의 핵심 부품이다. 기존의 T/R 모듈은 수평 편파 또는 수직 편파 신호를 스위치에 의해 선택적으로 수신할 수 있었다. 그러나 현재 기술적 흐름은 수평 편파와 수직 편파 신호를 동시에 수신하는 것이다. 따라서 이중 편파 동시 수신 T/R 모듈에 대한 개발이 활발히 이루어지고 있다. 본 연구는 차세대 SAR 탑재체를 위한 선행 연구로서 능동 위상 배열 레이더 T/R 모듈의 기술 개발 동향과 이중 수신 T/R 모듈의 예비 설계 결과를 정리하였다.

• 전자공학회논문지SC
• /
• 제40권5호
• /
• pp.350-354
• /
• 2003

본 논문에서는 능동 클램프 스위치를 위한 별도의 구동 회로가 생략된 새로운 자기 구동 능동 클램프 포워드 컨버터를 제안하였다. 능동 클램프 스위치의 구동에는 컨버터 자체의 변압기의 보조 권선을 이용하였고, 두 스위치 구동 신호 사이의 데드 타임을 설정하기 위하여 간단한 R-C지연 회로를 추가하였다. 제안된 컨버터의 동작 원리를 제시하였고 실험 결과를 가지고 이론적인 결과를 입증하였다. 출력 100W(5V/20A)의 컨버터를 제작하였으며 입력이 50V일 때 능동 클램프 스위치의 구동에 단지 1.5T의 보조 권선의 권선수로 충분하다는 점을 보였다. 끝으로 제안된 컨버터의 측정 효율을 제시하였고 91%의 최대 효율을 달성하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.129-132
• /
• 2001

Recently, a ZVT boost converter is embedded in a power factor correction system. The control circuit of the converter assures soft-switching for all the MOSFETs and load regulation. The PFC system contains additional control circuits which assure the input voltage in a sinusoidal form and feed-forward line voltage regulation. In this paper, a soft switching boost converter with zero-voltage transition(ZVT) main switch using zero-current switching(ZCS) auxiliary switch is proposed. Operating intervals of the converter are persented and analyzed. The proposed results show that the main switch maintains UT while auxiliary switch retains ZCS for the complete specified line and load conditions.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권3호
• /
• pp.164-168
• /
• 2016

A low insertion-loss, high-isolation switch based on single pole double throw (SPDT) for a 2.4GHz Bluetooth low-energy transceiver is presented in this paper. In order to increase isolation, the body floating technique is implemented. Based on characteristics whereby the ratio of the sizes of the shunt and the series transistors significantly affect the performance of the switches, the device sizes are optimized. A simple matching network is also designed to enhance the insertion loss. Thus, the SPDT switch has high isolation and low insertion loss without increasing the complexity of the circuit. The proposed SPDT is designed and simulated in a complementary metal-oxide semiconductor 65nm process. The switch has a $530{\mu}m{\times}270{\mu}m$ area and achieves 0.9dB, 1.78dB insertion loss and 40dB, 41dB isolation of transmission, reception modes, respectively.