• Journal of Sensor Science and Technology
• /
• v.26 no.5
• /
• pp.348-352
• /
• 2017

In this paper, we propose a high resolution A/D converter for a sensor interface that processes low frequency AC signals. A 6b SAR ADC with low power consumption and a 11b incremental ADC with high resolution are combined together to perform 15b resolution. Conventional hybrid ADC has a disadvantage that it can convert t only DC signal, but in this paper, it is possible to convert data to AC signal by increasing input range of incremental ADC. The decimation filter is implemented on-chip. The designed Hybrid ADC operates at supply voltage of 1.8V and consumes the current of 6.98uA. The OSR (oversampling ratio) is 90. And SFDR, SNDR, ENOB and FoMs are 96.59dB, 88.47dB, 14.4-bit and 139.5dB, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.451-460
• /
• 2014

In this paper, we examined the problem of the structural stability according to the patch load of a rectangular plate that reflects the material properties of A6082-T6 is used primarily for marine plant structure. it applied to the four patch loading shapes, the effect of aspect ratio, a boundary condition and calculated the critical elastic buckling load. Calculating the critical elastic buckling load, During the eigenvalue buckling analysis it is applied to the shell181 as 4 node shell element. when the plate subjected to patch loading compare to the plate under a uniform axial compression load, it is possible observed to occur the different elastic buckling behaviour and it could be confirmed that it is affected significantly on a variable position and type of loadings, such as the effect of the aspect ratio. Also, Critical elastic buckling load according to th patch loading type in simply supported rectangular plate a/b=1.0, ${\gamma}b$=200mm are calculated 67%(Loading type I), 119 %(Loading type II), 76 %(Loading type III), 160 %(Loading type IV), respectively. Loading type I and III could be determined with the strong elastic buckling behavior much more than Loading type II and IV.

• Investigative Magnetic Resonance Imaging
• /
• v.22 no.4
• /
• pp.218-228
• /
• 2018

Purpose: The objective of this study is to determine the effect of physical changes on MR temperature imaging at 7.0T and to examine proton-resonance-frequency related changes of MR phase images and T1 related changes of MR magnitude images, which are obtained for MR thermometry at various magnetic field strengths. Materials and Methods: An MR-compatible capacitive-coupled radio-frequency hyperthermia system was implemented for heating a phantom and swine muscle tissue, which can be used for both 7.0T and 3.0T MRI. To determine the effect of flip angle correction on T1-based MR thermometry, proton resonance frequency, apparent T1, actual flip angle, and T1 images were obtained. For this purpose, three types of imaging sequences are used, namely, T1-weighted fast field echo with variable flip angle method, dual repetition time method, and variable flip angle method with radio-frequency field nonuniformity correction. Results: Signal-to-noise ratio of the proton resonance frequency shift-based temperature images obtained at 7.0T was five-fold higher than that at 3.0T. The T1 value increases with increasing temperature at both 3.0T and 7.0T. However, temperature measurement using apparent T1-based MR thermometry results in bias and error because B1 varies with temperature. After correcting for the effect of B1 changes, our experimental results confirmed that the calculated T1 increases with increasing temperature both at 3.0T and 7.0T. Conclusion: This study suggests that the temperature-induced flip angle variations need to be considered for accurate temperature measurements in T1-based MR thermometry.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.28-33
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on properties of TMP fibers and handsheets. DES was prepared by mixing of lactic acid and betaine (L and B), and the molar ratio of these two components mixtures was controlled to 2:1 (L:B=2:1) and 5:1 (L:B=5:1). As results, lignin was partly extracted from the TMP fibers. Especially, the delignification of TMP samples was promoted according to the increase of the molar ratio of lactic acid. Except for tear index, both tensile index and burst index of handsheets were increased when higher molar ratio of lactic acid was mixed for DES preparation. However, the LB DES treatment of TMP fibers didn't give any effect on the optical properties of TMP handsheets. The plausibility of TMP fiber was to be enhanced by LB DES treatment.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.375-388
• /
• 2019

This paper aims to investigate the axial load behavior and stability strength of square tubed steel-reinforced concrete (TSRC) columns. Unlike concrete filled steel tubular (CFST) column, the outer steel tube of a TSRC column is mainly used to provide confinement to the core concrete. Ten specimens were tested under axial compression, and the main test variables included length-to-width ratio (L/B) of the specimens, width-to-thickness ratio (B/t) of the steel tubes, and with or without stud shear connectors on the steel sections. The failure mode, ultimate strength and load-tube stress response of each specimen were summarized and analyzed. The test results indicated that the axial load carried by square tube due to friction and bond of the interface increased with the increase of L/B ratio, while the confinement effect of tube was just the opposite. Parametric studies were performed through ABAQUS based on the test results, and the feasibility of current design codes has also been examined. Finally, a method for calculating the ultimate strength of this composite column was proposed, in which the slenderness effect on the tube confinement was considered.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1996.10a
• /
• pp.104-105
• /
• 1996

• Korean Journal of Poultry Science
• /
• v.25 no.1
• /
• pp.31-37
• /
• 1998

Two experiment were conducted to evaluate the feeding value of probiotics for the broiler chicks. Basal diets based on corn and soybean meal with no supplemental probiotics contained 21% dietary crude protein for the first 3 weeks and 19% for the rest of two weeks. In experiment 1, 0.2 % probiotics containing 2X 10 6 cfu /ml of Saccharomyces cerevisiae(S), Clostridium butyricum(C), Lactobacillus acidophilus(L), Bacillus polyfermenticus(B) were respectively supplemented to control groups. Two hundred day-olo chicks were randomly assigned to five treatments which had four replicates of 10 chicks each per treatment. Weight gain, feed consurnption, feed conversion ratio (FCR) were weekly measured for 5 weeks. The number of intestinal microflora was examined at the end of experiment. In experiment 1, Weight gain and feed intake of chicks fed probiotics exhibited a significant response compared to those of control for the first three weeks(P<0.01). Weight gain of S or C treatments was higher than that of control for the rest of two weeks, whereas it was significantly lower in L and B treatments than S or C treatments (P<0.01). Chicks fed S or C was significantly increased weight gain(P <0.05) compared to that of control at five weeks of age. FCR of C treatment seemed to improve relative to other supplemental probiotics groups, but was not significantly different. The number of intestinal anaerobes and Lactobacillus in large intestine of chicks fed probiotics supplements was significantly decreased compared to control groups(P<0.01). In experiment 2, there were six treatments: Ti, control; T2, 0.2%S; T3, 0.2%S + 0.2%C; T4, 0.2%S + 0.2%L; T5, 0.2%S + 0.2%B; T6, 0.2%S + 0.1%C + o.i%L + 0.1%B. Control diet based on corn soybean meal contained 21% CP and 3,2OOca1 /g ME with no probiotics. There were four replicates of 10 chicks each per treatment. Weight gain of chicks fed probiotics tended to increase compared to control groups, but were not significantly different between them. FCR was also improved in probiotics treatments. However, there were no significant differences between probiotics supplementation and control groups. The results of these experiments indicated that dietary supplemental probiotics improved weight gain, feed efficiency for the first three weeks of young broiler chicks, whereas supplementation of C, L, B combined probiotics to young broiler chicks was not superior to those of single or two probiotics.

• Journal of Life Science
• /
• v.21 no.4
• /
• pp.515-520
• /
• 2011

This study was carried out to evaluate the immunomodulatory capacity of edible mushrooms, including Lepista nuda, Corprinis comatus, Letinus edodes, and Pleurotus eryngii, in mice. BALB/c mice were administered 1, 50, and 500 mg/kg body weight of various mushrooms five times a week over 4 weeks through gastric intubation. The control mice were administered distilled water. No significant changes in body weight were observed. IL-4 and IFN${\gamma}$ production was evaluated with splenic T lymphocytes stimulated in vitro with phytohemagglutinins for 48 hr. The mice group administered L. edodes showed significantly higher ratio of IFN${\gamma}$ versus IL-4 than the other groups. In addition, the ratio of plasma IgG2a versus IgG1 was also significantly elevated in mice treated with L. edodes. However, no significant change was observed in ratio of IgG2a versus IgG1 in splenic B lymphocytes stimulated in vitro with lipopolysaccharides for 7 days. These results indicate that L. edodes can enhance type-1 helper T cell-mediated cellular immunity.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.1
• /
• pp.18-24
• /
• 2019

This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

• Journal of Pharmacopuncture
• /
• v.3 no.2
• /
• pp.79-97
• /
• 2000

Objectives : To investigate the effects of herb-acupunctures of Qi tonification herbs or formula on the rat immune depression induced by an anticancer drug, methotrexate (MTX) Methods: Animals were divided into 5 groups; Normal control group was not given any treatment. Immune depression was induced by oral administration of 1mg/kg MTX b.i.d for 4 days in Control, Sample I, II, and III groups. We treated on CV 4 (Guanyuan) with saline, Bojoongiggi-tang (Buzhongyiqi-tang), Ginseng Radix and Astragali Radix herb-acupunctures in Control, Sample I, II, and Ill groups, respectively. In both blood and spleen, the assessment of CD4+ T-cell count, CD8+ T-cell count, CD4/CD8 T-cell ratio was performed. Results: Here we show that 3 herb- acupuncture groups have an influence, to some extent, on CD4+ and CD8+ T-cell counts and CD4/CD8 T-cell ratio in both blood and spleen. Astragali Radix herb-acupuncture, in particular, was found to have significantly increased CD4+ T-cell count in blood and CD4/CD8 T-cell ratio in blood and spleen. Conclusions: The results of this study suggest that herb-acupunctures of Bojoongiggi-tang (Buzhongyiqi-tang), Ginseng Radix and Astragali Radix may have an influence over rat immune depression induced by MTX.