• 대한전자공학회논문지SD
• /
• 제44권9호
• /
• pp.59-70
• /
• 2007

본 논문에서는 휴대 정보기기 시스템에서 더욱 향상된 실시간 3D 그래픽 가속 능력을 갖는 SoC(System on a Chip) 구현을 위해 효과적인 T&L(Transform & Lighting) Processor 구조를 연구하였다. T&L 과정에 필요한 IP들을 설계하였으며, 이를 바탕으로 SoC Platform 기반으로 검증하였다. 설계된 T&L Processor는 24 bits 부동소수점 형식과 16 bits 고정소수점 형식을 적절하게 혼용하고 계산식의 병렬성을 최대한 활용하여 Transform 과정 연산과 Lighting 과정 연산의 지연시간을 균일하게 배분하여 Transform 과정만 처리할 때와 Lighting과 혼용으로 처리할 때 연산 속도의 차이가 없이 동작이 가능하다. 설계된 T&L Processor는 SoC 플랫폼을 이용하여 성능 측정 실험 및 검증을 하였고, Xilinx-Virtex4 FPGA에서 80 MHz의 동작 주파수를 확인하였고 초당 20M개의 정점(Vertex) 처리 성능을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.865-870
• /
• 1998

We propose a multifunctional power line compensator (PLC) which can individually compensate multiple impediments at the same time. The PLC has the flexibility to share power to each compensation according to commands, this improving the working rate. We constructed a 100kVA PLC model including a controller with digital signal processor (DSP) to realize a multifunctional compensation were obtained.

• Journal of the Optical Society of Korea
• /
• 제2권2호
• /
• pp.74-79
• /
• 1998

The use of a fiber Fabry-Perot interferometer (FFPI) as an optical current transducer is demonstrated. A conventional inductive pickup coil converts the time-varying current I(t) being measured to a voltage waveform V(t) applied across a piezeolectric strip to which the FFPI is bonded. The strip experiences a longitudinal expansion and contraction, resulting in an optical phase shift ${\phi}(t)$ in the fiber proportional to V(t). This phase shift is measured using a frequency-modulated semiconductor light source, photodiodes to monitor the reflected light from the FFPI and the laser power, and a digital signal processor. Calibration routines compute V(t) and I(t) from the measured phase shift at a l KHz rate. Response to 60 Hz ac over the design range 0-1300A rms is characterized Transient response of the FFPI transducer is also measured.

• 한국정밀공학회지
• /
• 제7권4호
• /
• pp.29-39
• /
• 1990

The purpose of this research is to analyze the impact behaviors of laminated composite plates subjected to the transverse low-velocity impact by the steel ball. A plate finite element model based on Whitney and Pagano's the first-order shear deformation theory (FSDT) in conjunction with experimental static contact laws is formulated and then compared with the results of the impact experiments. Because the input data and the output data printed at every integration time step are lots of amount, these are interactively poecessed by the developed pre-processor(PREPLOT) and postprecessor(POSTPLOT). All results from these procesors are automatically generated by CALCOMP plotter. Test materials are glass/expoxy composite materials. The specimens are composed of [$0^{\circ} /45^{\circ}/0^{\circ}/-45^{\circ}/0^{\circ}/]2s\ and \[90^{\circ}/45^{\circ}/90^{\circ}/-45^{\circ}/90^{\circ}/$]2s stacking sequences and have $4.5^t{\times}200^w{\times}200^l$(mm) and $4.5^t{\times}300^w{\times}300^l$(mm) dimensions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1024-1026
• /
• 2006

This paper designed a robust control of an induction motor using a disturbance cancellation observer of a feedforward control. The speed response of conventional PI controller characteristic is affected by variations of load torque disturbance. In the proposed system, the speed control characteristic using a feedforward control isn't affected by a load torque disturbance. High speed calculation and processing for vector control is carried out by ADMC300 digital signal processor. Validity of the proposed control method is verified through simulation and experimental result.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.807-811
• /
• 2003

In this paper, the speed control system of induction motor was proposed using vector control algorithm and space voltage vector PWM method to improve the dynamic performance of Induction motor. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM technique. The high-speed calculation and processing for vector control is carried out by TMS320C31 digital signal processor and IGBT module. The proposed scheme is verified through digital simulations and experiments for 3.7[kw] induction motor and shows good dynamic performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.334-336
• /
• 2005

This paper proposes a simple MPPT control scheme of a Current- Control-Loop Error system Based that can be obtains a lot of advantage to compare with another digital control method, P&O and IncCond algorithm, that is applied mostly a PV system. An existent method is needed an expensive processor such as DSP that calculated to change the measure power of a using current and voltage sensor at the once. But, a proposed method is easy to solve the cost reduction and power unbalance problems that it is used by control scheme to limit error of a current control of common sensor. This proposed algorithm had verified through a simulation and an experiment on battery charger using PIC that is the microprocessor of a low price.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.83-90
• /
• 2013

OpenMP is becoming more and more useful as a simple parallel processing paradigm on SMP (Shared Memory Multi-Processors) computing environment with the development of multi-core processors. However, very few data is available publically regarding the OpenMP performance in CFD (Computational Fluid Dynamics). In the present study a CFD test suite is prepared for the performance evaluation of OpenMP on various multi-core systems. The test suite is composed of two-dimensional numerical simulations for inviscid/viscous and reacting/non-reacting flows using three different levels of grid systems. One to five test runs were carried out on various systems from dual-core dual threads to 16-core 32-threads systems by changing the number of threads engaged for each test up to 80. The results exhibit some interesting results and the lessons learned from the tests would be quite helpful for the further use of OpenMP for CFD studies using multi-core processor systems.

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2003년도 제3회 국제심포지움 및 학술대회
• /
• pp.119-119
• /
• 2003

분만후 젖소의 자궁내 미생물상을 조사하고 미생물로부터 분리한 Lipopolysaccharide를 적용하여 소의 번식효율 증진에 기여하고자 분만후 젖소의 도축장 유래 자궁을 채취하여 혐기적 상태에서 균분리 동정을 실시하였다. 균분리 동정을 위하여, 시료를 1cm$\times$1cm로 채취하여 혐기상태에서 거품이 생길 때까지 vortexing한 후 균액 300$\mu l$를 뽑아 혐기배지에 도말하였고 도말한 plate는 $37{\circ}C$ 혐기chamber에서 24시간 배양하였다. 혐기배지에서 자란 균의 colony를 따서 Mac, BHI+B, BHI 배지에 배양한 후 Gram stain을 실시하였다. BHI 배지에서 자란 균의 colony를 따서 BUA+B 배지에 계대배양하였고 BUA+B 배지에서 자란 균중에 가장 마지막으로 자란 균을 따서 An-IF에 넣고 탁도를 63%T로 맞춘 후 An micro plate에 100$\mu l$씩 분주하였다. 분주한 plate를 $37{\circ}C$ 혐기 chamber에서 20~24시간 동안 배양한 후 Biolog를 실시하였다. 시료의 UV측정을 위하여 Sonic Processor로 세포를 분쇄하였고 분쇄한 세포를 $4{\circ}C$에서 10,000rpm으로 10분간 원심분리한 후 상층액을 분리하여 0.45$\mu m$ 필터로 여과한 다음 여과액을 취하여 UV로 standard(E.coli O26 B6 LPS)와 sample(10배 및 20배 희석액)을 측정하였다. (중략)

• 농업생명과학연구
• /
• 제43권5호
• /
• pp.1-8
• /
• 2009

고추 12 품종의 SMP 처리시 carrier와 수분의 배율, 처리기간 및 처리온도에 대한 조사 결과 적정 처리기간과 carrier와 수분의 배율은 품종마다 차이는 있었지만, 처리 중 발아가 일어나지 않았고, 발아율을 높이며, $T_{50}$을 단축시킬 수 있는 처리로 왕과 마니따 품종은 carrier와 수분의 배율이 1:3에서 7일이었다. 나머지 10 품종은 1:7의 비율에서 3일이 좋았다. 종가집 품종은 다른 품종에 비해 처리기간과 수분배율에 따라 발아율과 $T_{50}$이 불규칙한 경향을 나타낸 품종으로 조사되었다. 처리온도는 $15^{\circ}C$에서 $35^{\circ}C$로 설정하여 조사한 결과, 처리 중 유근돌출의 억제와 발아성 향상에 안정적인 처리는 $20^{\circ}C$인 것으로 조사되었다.