• Polymer(Korea)
• /
• v.34 no.2
• /
• pp.178-183
• /
• 2010

Medical metal stents inserted to patients with a cardiovascular disease associated with coronary artery system have relatively increased the survival rate. The development of new stents is, however, urgently required due to restenosis and late thrombosis generated in metal stents. To solve these problems, the biodegradable polymers such as poly(lactide-co-glycolide) (PLGA), poly(L-lactide)(PLLA), and poly ($\varepsilon$-caprolactone)(PCL) were mixed with alpha lipoic acid (ALA), which is well known to inhibit the proliferation of neointimal hyperplasia. Subsequently, the ALA-loaded polymers were coated on stainless steel by electrospray. The drug-eluting behaviors from the coated polymers were investigated according to kinds and concentrations of polymers, spray rates, and kinds of solvents. The drug-eluting rate from PCL with the lowest glass transition temperature was the fastest among three polymers and followed by PLGA and PLLA. The surface roughness increased as the spray rate was increased and also the drug-eluting rate was affected by kinds of solvents with different boiling point. It is expected that drug-eluting stent (DES) coated with ALA-loaded polymers can be applied practically for clinical applications by controlling the behavior of drug release.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.44-49
• /
• 2011

Under the Enforcement Rules of the National Health Promotion Act, smoking areas in coffee shops in Korea should be divided off from other areas. The effect on indoor air quality of different division types for smoking areas was evaluated. Using real-time monitors, fine particulate matter <2.5 ${\mu}m$ in diameter ($PM_{2.5}$) concentrations were measured simultaneously in the smoking and non-smoking areas of 30 coffee shops in Seoul. Average $PM_{2.5}$ concentrations in smoking and non-smoking areas were 132 ${\mu}g/m^3$ and 52 ${\mu}g/m^3$, respectively; significantly different. Average $PM_{2.5}$ concentrations in non-smoking areas were 39 ${\mu}g/m^3$ in the glass-wall type and 64 ${\mu}g/m^3$ in the separate-floor type. These $PM_{2.5}$ levels were above the US national ambient air quality standard of 35 ${\mu}g/m^3$. Although indoor $PM_{2.5}$ levels in non-smoking areas were reduced by the division, the rates of reduction were not significantly different by division type. Our results demonstrated that $PM_{2.5}$ from smoking areas can infiltrate into non-smoking areas. Therefore, a complete indoor smoking ban in coffee shops is the only way to protect customers and workers in non-smoking areas.

• Journal of Periodontal and Implant Science
• /
• v.44 no.2
• /
• pp.79-84
• /
• 2014

Purpose: While single-species biofilms have been studied extensively, we know notably little regarding multispecies biofilms and their interactions. The purpose of this study was to develop and evaluate an in vitro multispecies dental biofilm model that aimed to mimic the environment of chronic periodontitis. Methods: Streptococcus gordonii KN1, Fusobacterium nucleatum ATCC23726, Aggregatibacter actinomycetemcomitans ATCC33384, and Porphyromonas gingivalis ATCC33277 were used for this experiment. The biofilms were grown on 12-well plates with a round glass slip (12 mm in diameter) with a supply of fresh medium. Four different single-species biofilms and multispecies biofilms with the four bacterial strains listed above were prepared. The biofilms were examined with a confocal laser scanning microscope (CLSM) and scanning electron microscopy (SEM). The minimum inhibitory concentrations (MIC) for four different planktonic single-species and multispecies bacteria were determined. The MICs of doxycycline and chlorhexidine for four different single-species biofilms and a multispecies biofilm were also determined. Results: The CLSM and SEM examination revealed that the growth pattern of the multispecies biofilm was similar to those of single-species biofilms. However, the multispecies biofilm became thicker than the single-species biofilms, and networks between bacteria were formed. The MICs of doxycycline and chlorhexidine were higher in the biofilm state than in the planktonic bacteria. The MIC of doxycycline for the multispecies biofilm was higher than were those for the single-species biofilms of P. gingivalis, F. nucleatum, or A. actinomycetemcomitans. The MIC of chlorhexidine for the multispecies biofilm was higher than were those for the single-species biofilms of P. gingivalis or F. nucleatum. Conclusions: To mimic the natural dental biofilm, a multispecies biofilm composed of four bacterial species was grown. The 24-hour multispecies biofilm may be useful as a laboratory dental biofilm model system.

• Tuberculosis and Respiratory Diseases
• /
• v.70 no.5
• /
• pp.397-404
• /
• 2011

Background: To evaluate chest CT findings of pandemic influenza A/H1N1 pneumonia without co-infection. Methods: Among 56 patients diagnosed with pandemic influenza A/H1N1 pneumonia, chest CT was obtained in 22 between October 2009 and Februrary 2010. Since two patients were co-infected with bacteria, the other twenty were evaluated. Predominant parenchymal patterns were categorized into consolidation, ground glass opacity (GGO), and mixed patterns. Distribution of parenchymal abnormalities was assessed. Results: Median age was 46.5 years. The CURB-65 score, which is the scoring system for severity of community acquired pneumonia, had a median of 1. Median duration of symptoms was 3 days. All had abnormal chest x-ray findings. The median number of days after the hospital visit that Chest CT was performed was 1. The reasons for chest CT performance were radiographic findings unusual for pneumonia (n=13) and unexplained dyspnea (n=7). GGO was the most predominant pattern on CT (n=13, 65.0%). Parenchymal abnormalities were observed in both lungs in 13 cases and were more extensive in the lower lung zone than the upper. Central and peripheral distributions were identified in ten and nine cases, respectively. One showed diffuse distribution. Peribronchial wall thickening was found in 16 cases. Centrilobular branching nodules (n=7), interlobular septal thickening (n=4), atelectasis (n=1), pleural effusion (n=5), enlarged hilar and mediastinal lymph nodes (n=6 and n=7) were also noted. Conclusion: Patchy and bilateral GGO along bronchi with predominant involvement of lower lungs are the most common chest CT findings of pandemic influenza A/H1N1 pneumonia.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.3
• /
• pp.131-139
• /
• 2016

Detailed knowledge on maskelynite, a glassy phase of plagioclase found in shocked meteorites and impact craters, is essential to understand a shock metamorphism. Here, we explore an inhomogeneous shock metamorphism in the lunar meteorite Mount DeWitt (DEW) 12007 with an aim to understand the formation mechanism of maskelynite. Most plagioclase grains in the DEW 12007 partially amorphized into maskelynite with a unidirectional orientation. Back-scattered electron (BSE) images of maskelynite show a remnant of planar deformation fracture possibly indicating that the maskelynite would be formed by solid-state transformation(i.e., diaplectic glass). Plagioclase with flow texture is also observed along the rim of maskelynite, which would be a result of recrystallization of melted plagioclase. Results of Raman experiments suggest that shock pressure for plagioclase and maskelynite in the DEW 12007 is approximately 5-32 GPa and 26-45 GPa, respectively. The difference in shock pressures between plagioclase and maskelynite can be originated from 1) external factors such as inhomogeneous shock pressure and/or 2) internal factors such as chemical composition and porosity of rock. Unfortunately, Raman spectroscopy has a limitation in revealing the detailed atomic structure of maskelynite such as development of six- or five-coordinated aluminum atom upon various shock pressure. Further studies using nuclear magnetic resonance spectroscopy are necessary to understand the formation mechanism of maskelynite under high pressure.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.209-219
• /
• 1993

Evaporated Al/Pd thin films were irradiated with various doses to produce intermetallic compounds. In order to study the first phase formation and phase sequence, RBS and TEM studies have been used. It was found that the initial phase formed by irradiation of $5{\times}10^{15}Ar^+/cm^2$ was $Al_3Pd_2$, while $1.5{\times}10^{16}Ar^+/cm^2$ gave the subsequent phase of AlPd. This phenomenon was analysed using effective heat of formation (${\Delta}$H') model. The experimental results agree with that predicted by effective heat of formation model. This model has been extended to predict the first phase formation and phase sequence by ion beam mixing in metal/Si systems as well as metal-metal systems.

• Membrane Journal
• /
• v.24 no.4
• /
• pp.325-331
• /
• 2014

We synthesized novel polyimides with high gas permeability and selectivity for application of on board inert gas generation system (OBIGGS). 2,2-bis(3,4-carboxylphenyl) hexafluoropropane dianhydride (6FDA) and two kinds of amines with high permeability and solubility were used to prepare the novel polymide. 2,3,5,6-Tetramethyl-1,4-phenylenediamine (TMPD) was used to improve gas permeability and various kinds of diamines were used to improve the gas selectivity respectively. The polyimide copolymers were synthesized by commercial chemical imidization method and their average molecular weights were over 100,000g/mol. The glass temperature ($T_g$) and the thermal degradation temperature were characterized using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The synthesized copolymers showed high $T_g$ over $300^{\circ}C$ and high thermal degradation temperature over $500^{\circ}C$. The gas permeation properties were measured by time-lag equipment. Although general polyimides showed very low gas permeability, synthesized polyimide copolymer showed high $O_2$ permeability of 36.21 barrer with high $O_2/N_2$ selectivity around 4.1. From this result, we confirm that these membranes have possibility to apply to OBIGGS.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.1
• /
• pp.27-35
• /
• 1980

The purpose of the present study is to find the light intensity which induces maximum gathering rate and to observe the variation of the gathering rate both in' daytime and at night by using two species of commercial fishes: rock bream, Oplegnathus fasciatus(Temminet et Schlegel) and glass-puffer,\ulcorner Fugu.niphobles (Jordan \ulcorneret. Snyder). An experimental tank($360L{\times}50W{\times}55H cm$) was set up in a dark room. An illumination system was attached to one end of the tank to control horizontal light intensity. Six artificial light sources were prepared by combination of two light bulbs (5W, 150W) and seven filters. During the. experiment water depth was maintained 50 em level in the tank. The tank was marked into six longitudinal sections each, being 60 cm long to observe the distribution of fish. The fish were acclimatized in dark condition for 40 minutes prior to the main experiment. Upon turning on the light, the number of fish in each section was counted40 times every 30 seconds, and the gathering rates were obtain from th~ average number of. fish' in each section. The light intensity inducing maximum gathering rate is as follows: rock bream: 162.0 lux (104,3--238, 1 lux) (day), 162.0 lux (104.3--238.1 lux) (night). grass puffer: 16.6 lux (10.6--24.5 lux) (day), 1. 9 lux (1. 2-2. 9 lUX) (night). Trend .of the gathering rate in illumination time revealed different results in two fish species. Gathering rate of rock bream showed the increasing trend fluctuately with the lapse of ' illumination time. However, that of grass puffer showed the increasing trend gradually at the early period of the illumination time and the uniform trend at the latter period with little distictive fluctuation.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.187-192
• /
• 2006

The preparation and characterization of new polymer composite membranes containing polyphenylene oxide (PPO) thin films with hetropoly acid (HPA) are presented. PPO thin films with phosphotungstic acid (PWA) or phosphomolybdic acid (PMA) have been prepared by using the solvent mixture. The PWA and PPO can be blended using the solvent mixture, because PPO and PWA are not soluble in the same solvent. In this study, methanol was used as a solvent dissolving PWA and chloroform was used as a solvent dissolving PPO. PPO-PWA solutions were cast onto a glass plate with uniform thickness. The composite membranes were prepared by casting Nafion mixture on porous PPO-PWA films. The morphology and structure of these PPO-PWA films were observed with scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS). The composite membranes were characterized by measuring their ion conductivity and methanol permeability. The performance was evaluated with composite membranes as electrolytes in fuel cell conditions. The methanol cross-over of composite membranes containing PPO-PWA barrier films in the DMFC reduced by 66％.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.105-112
• /
• 2000

In-Ceram system is one of contemporary esthetic all ceramic restorations and has relatively high flexural strength. The purpose of this study was to evaluate the marginal fit of In-Ceram crown according to shoulder width and measuring position. In this study, twenty seven In-Ceram crowns devided into three groups, each prepared with shoulder width of 0.6mm, 0.9mm and 1.2mm. All specimens were cemented with glass ionomer cement. After cementation, specimens were measured marginal gap between the margin of the In-Ceram crown and the finishing line of resin master die by using a refrective microscope. Marginal gaps were recorded at the labial, lingual, mesial and distal measuring points on the resin master die. The results of this study were as follows: 1. Mean marginal fits of each group were $81.28{\mu}m$ in 0.6mm shoulder width, $70.78{\mu}m$ in 0.9mm shoulder width and $67.75{\mu}m$ in 1.2mm shoulder width. 2. There was significant difference between group 0.6mm and 0.9mm, 1.2mm.(p<0.05). 3. In comparison of marginal fit according to the measuring points, there was no significant difference.