• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.4
• /
• pp.214-220
• /
• 2007

Recently, most embedded systems have the multi-functions mixed the hardware with the software. The existing sequence programming methods are not suitable to implement the embedded system with multi-functions. So, it can be overcome the limit of a facility implementation by introducing the operating system in system. Also, due to the requirement about the better convenient and comfortable meeting or lecture environment, the necessity of electronic white-board is getting higher. Specially, the education using multimedia information is much more desirable for various and improved lecture at the high school and the university. But the sequence program which have been managed in existing electronic white-board system has some difficulties to achieve the software-oriented systems which has to accomplish many functions. In this paper, we propose the method to implement a facility of electronic white-board through using the embedded linux with excellent performance. The embedded linux presents the powerful software environment for the implementation of an embedded system and makes the realization of many various functions easy because it follows kernel characteristics of linux. In this paper, we describe the details for the structure of hardware, kernel source and device driver of a developed electronic white-board.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.697-705
• /
• 2005

Vibration-based damage identification method using embedded sensitivity functions is discussed. The theory of embedded sensitivity functions is reviewed and applied to identify damage in a three degree-of-freedom system and a metallic panel. Embedded sensitivity functions are algebraic combinations of measured frequency response functions that reflect changes in the response of mechanical systems when mass, damping or stiffness parameters are changed. By comparing the embedded sensitivity functions with finite difference functions using undamaged and damaged frequency response functions, damage is shown to be properly detected, located and quantified in theory and practice assuming that structures of interest are only damaged in one location. Simulated and experimental results indicate that the technique is most effective when changes to frequency response functions are small to avoid distorsions in the estimated perturbations due to variations in the sensitivity functions.

• Journal of applied mathematics & informatics
• /
• v.28 no.1_2
• /
• pp.439-450
• /
• 2010

In this paper, we propose a new idea to evaluate the prediction accuracy of user's preference generated by memory-based collaborative filtering algorithm before prediction process in the recommender system. Our analysis results show the possibility of a pre-evaluation before the prediction process of users' preference of item's transaction on the web. Classification functions proposed in this study generate a user's rating pattern under certain conditions. In this research, we test whether classification functions select users who have lower prediction or higher prediction performance under collaborative filtering recommendation approach. The statistical test results will be based on the differences of the prediction accuracy of each user group which are classified by classification functions using the generative probability of specific rating. The characteristics of rating patterns of classified users will also be presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.125-128
• /
• 1999

A linear time-invariant model can be described either by a parametric model or by a nonparametric model. Nonparametric models, for which a priori information is not necessary, are basically the response of the dynamic system such as impulse response model and frequency models. Parametric models, such as transfer function models, can be easily described by a small number of parameters. In this paper aiming to take benefit from both types of models, we will use linear-combination of basis fuctions in an impulse response using a few parameters. We will expand and generalize the Kautz functions as basis functions for dynamical system representations and we will consider estimation problem of transfer functions using Kautz function. And so we will present the influences of poles settings of Kautz function on the identification accuracy.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1420-1422
• /
• 2000

The railway signaling system consists of micro-computerized vital devices on board and ground, which are connected to one another by track circuits, and interlocking equipment for route control. Therefore it is important to validate the required functions of developed system and interface between developed signaling systems. To verify the conditions and functions of signaling functions, the laboratory prototype test bench, which consists of personal computers LAN, will be developed. In this paper design of signaling system test-bench for high-speed signaling is described and developed software module are presented.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.395-402
• /
• 2019

In this paper, we implemented an Ultra-Wideband radar system using Stripmap Synthetic Apertrure Radar algorithm to recognize objects inside a box. Different window functions such as Hanning, Hamming, Kaiser, and Taylor functions to improve image recognition performance are applied and implemented to radar system. The Ultra-Wideband radar system with 3.1~4.8 GHz broadband and UWB antenna were implemented to recognize the conductor plate located inside 1m3 box. To obtain the image, we use the propagation data in the time domain according to the 1m movement distance and use the Range Doppler algorithm. The effect of different window functions to improve the recognition performance of the image are analyzed. From the compared results, we confirmed that the Kaiser window function can obtain a relatively good image.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.45-49
• /
• 1997

In this paper, we controlled a Rotary Inverted Pendulum System using Neuro-Fuzzy Controller(NFC). The inverted pendulum system is widely used as a typical example of an unstable nonlinear control system which is difficult to control. Fuzzy theory have been because membership functions and rules of a fuzzy controller are often given by experts or a fuzzy logic control system. This controller is a feedforward multilayered network which integrates the basic elements and functions of a tradtional fuzzy logic controller into a connectionist structure which has distributed learning abilities. Such NFC can be constructed from training examples by learning rule, and the structure can be trained to develop fuzzy logic rules and find optimal input/output membership functions. Using this controller, we presented the results that controlled a Rotary Inverted Pendulum System and the associated algorithms.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.76-78
• /
• 2000

The previous MCC's have the demerits of high cost and much manhour for rework because they are impossible for the standardization of products and have many manual connections. The customers require the products which can operate in connection with SCADA system by digitalizing the functions of the current MCC's and are systematized with capability of remote control. To solve these disadvantages and requirements, we developed the Electronic Motor Control System according to starting type for applying to fields based on this. This system has the various functions such as protection, measurement, and communication. Using these functions, it can monitor motor status through communication with the upper system and define the circuit for lower connection cost according to starting type and shorter manufacture period by program. The development of this product results in establishment of competitive structure with domestic competition and perfect automatic monitoring through linkage with SCADA system. In addition, it provides the comparable dominancy of receiving on orders in switch gear and adaptability to change of MCC market in Japan and Europe.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.12
• /
• pp.13-23
• /
• 1996

In tis paper we researched the implementation methodology and techniques for the high real-time responsive operating system of an ISDN PABX system. The operating system we developed takes a high role as a dedicated real-time operating system for PABX systems. It provides the functions and synchronization, interprocessor communication, interrupt processing, and data I/O processing. And also it provides lots of real-time processing functions for supproting various real-time applications. Finally, we evaluated the performance by measuring the best, the average, and the worst-case execution time of all functions implemented in this real-time operating system.

• Journal of the Korean Home Economics Association
• /
• v.34 no.5
• /
• pp.249-264
• /
• 1996

The purpose of this study was to investigate automatic manipulating functions of dart of CAD system, and to classify the dart of women's front bodice. The results from this study: 1.3 CAD systems, were compared in automatic manipulating functions of dart. Gerber system & Investronica system were based on the pivot-method of dart manipulating, Yuka system was based on the slash-method. 2. It is classified and made a dart-design chart with using darts, which were as examples related to dart manipulating in text & reference of the pattern design. 3. In case of education of dart manipulation, the classified dart-design chart provides variations of a basic pattern through dart manipulation.