• ETRI Journal
• /
• v.34 no.6
• /
• pp.911-921
• /
• 2012

In high-speed wireless communications, an analysis of the propagation characteristics is an important process. Information on the propagation characteristics suitable for each environment significantly helps in the design of mobile communications. This paper presents the analysis results of radio propagation characteristics in outdoor environments for a new mobile wireless system at 781 MHz. To avoid the interference of Korean DTV broadcasting, we measure the channel characteristics in urban, suburban, and rural areas on Jeju Island, Republic of Korea, using a channel sounder and $4{\times}4$ antenna. The path loss (PL) measurement results differ from those of existing propagation models by more than 10 dB. To analyze the frequency characteristics for Korean propagation environments, we derive various propagation characteristic parameters: PL, delay spread, angular spread, and K-factor. Finally, we verify the validity of the measurement results by comparing them with the actual measurement results and 3D ray-tracing simulation results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.4
• /
• pp.195-200
• /
• 2015

The thermal performance in the channels with two-wall rectangular convergent/divergent cross-sectional areas along the axial distance was investigated experimentally. The ribbed rectangular convergent/divergent channels were manufactured with a fixed rib height (e) = 10 mm and the ratio of rib spacing (p) to height (e) = 10. Three different parallel angled ribs (a = $30^{\circ}$, $45^{\circ}$, and $60^{\circ}$) were each placed on the channel's one sided wall only. The convergent channel of $D_{ho}/D_{hi}=0.67$ and the divergent channel of $D_{ho}/D_{hi}=1.49$ were considered. The ribbed divergent channel produced better thermal performance than the ribbed convergent channel in three different restrictions; identical flow rate, identical pumping power, and identical pressure loss.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.902-904
• /
• 2005

The AC-DC converter, which has three-phase AC power as input and isolated DC power as output is used for the regulated DC power supply of the telecommunication power processing system for several kilowatt class applications. The conventional DC power supply for the telecommunication power system comprises a PWM rectifier with sine-wave shaping input current unity power factor and a DC/DC converter connected to the PWM converter, which obtains DC 48[V]. Since power passes through these two power stage converters, the conversion power loss is difficult to provide high efficiency. To resolve these problems, this paper presents a new PWM rectified as a 1-stage power conversion method. It simulation and experimental results as proved from a practical point of view that 92.1[%]of conversion efficiency and input current which can meet harmonics regulation of the Class-A in IEC61000-3-3 are achieved.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3114-3116
• /
• 2005

The AC-DC converter, which has three-phase AC power as input and isolated DC power as output is used for the regulated DC power supply of the telecommunication power processing system for several kilowatt class applications. The conventional DC power supply for the telecommunication power system comprises a PWM rectifier with sine-wave shaping input current unity power factor and a DC/DC converter connected to the PWM converter, which obtains DC 48[V]. Since power passes through these two power stage converters, the conversion power loss is difficult to provide high efficiency. To resolve these problems, this paper presents a new PWM rectified as a 1-stage power conversion method. It simulation and experimental results as proved from a practical point of view that 92.1[%] of conversion efficiency and input current which can meet harmonics regulation of the Class-A in IEC61000-3-3 are achieved.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.4
• /
• pp.51-60
• /
• 2012

Most streams in Korea have been managed mainly for the control of flood or usages of the water for agriculture, industry, and others, resulting in the loss of their natural characteristics. In recent years, ecological system and function of streams are recognized as very important, and a paradigm change in their management is prevailing. This study, first, analyzed recent stream restoration policies and projects and derived major restoration planning factors; second, evaluated relative importance and priority of the factors using AHP (Analytic Hierarchy Process) method. The derived planning factors were four factors for the level 1, and sixteen factors for the level 2. Relative importance and priority of each factor were calculated, and finally, a composite relative importance and priority of all the factors were suggested. These findings are hoped to support stream restoration policies and be used in drafting restoration guidelines.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.777-787
• /
• 2005

In this paper, we propose an urgency- and efficiency-based wireless packet scheduling (UEPS) algorithm that is able to schedule real-time (RT) and non-real-time (NRT) traffics at the same time while supporting multiple users simultaneously at any given scheduling time instant. The UEPS algorithm is designed to support wireless downlink packet scheduling in an orthogonal frequency division multiple access (OFDMA) system, which is a strong candidate as a wireless access method for the next generation of wireless communications. The UEPS algorithm uses the time-utility function as a scheduling urgency factor and the relative status of the current channel to the average channel status as an efficiency indicator of radio resource usage. The design goal of the UEPS algorithm is to maximize throughput of NRT traffics while satisfying quality-of-service (QoS) requirements of RT traffics. The simulation study shows that the UEPS algorithm is able to give better throughput performance than existing wireless packet scheduling algorithms such as proportional fair (PF) and modified-largest weighted delay first (M-LWDF), while satisfying the QoS requirements of RT traffics such as average delay and packet loss rate under various traffic loads.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.1
• /
• pp.123-126
• /
• 1999

A successful outcome of pregnancy requires an efficient uteroplacental vascular system. Since this system may be compromised by disorders of haemostasis associated with a prothrombotic state, maternal thrombophilia might be a risk factor for fetal loss. Hereditary deficiencies of the naturally occuring anticoagulants are well recognized conditions predisposing to recurrent venous thromboembolism. Since thrombotic phenomena have been implied as a cause of abortion and stillbirth, these deficiencies might increase the risk of fetal demise. We have experienced a case of antiphospholipid syndrome associated with protein C deficiency in patient with recurrent spontaneous abortion. So we report this case with a brief review of literatures.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2462-2464
• /
• 2005

The AC-DC converter, which has three-phase AC power as input and isolated DC power as output is used for the regulated DC power supply of the telecommunication power processing system for several kilowatt class applications. The conventional DC power supply for the telecommunication power system comprises a PWM rectifier with sine-wave shaping input current unity power factor and a DC/DC converter connected to the PWM converter, which obtains DC 48[V]. Since power passes through these two power stage converters, the conversion power loss is difficult to provide high efficiency. To resolve these problems, this paper presents a new PWM rectified as a 1-stage power conversion method. It simulation and experimental results as proved from a Practical point of view that 92.1[%]of conversion efficiency and input current which can meet harmonics regulation of the Class-A in IEC61000-3-3 are achieved.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1820-1822
• /
• 2005

The AC-DC converter, which has three-phase AC power as input and isolated DC power as output is used for the regulated DC power supply of the telecommunication power processing system for several kilowatt class applications. The conventional DC power supply for the telecommunication power system comprises a PWM rectifier with sine-wave shaping input current unity power factor and a DC/DC converter connected to the PWM converter, which obtains DC 48[V]. Since power passes through these two power stage converters, the conversion power loss is difficult to provide high efficiency. To resolve these problems, this paper presents a new PWM rectified as a 1-stage power conversion method. It simulation and experimental results as proved from a practical point of view that 92.1[%]of conversion efficiency and input current which can meet harmonics regulation of the Class-A in IEC61000-3-3 are achieved.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.6
• /
• pp.1-6
• /
• 2019

Construction automation can be an effective alternative for the lack of skilled labor and loss of productivity. With such a background, Korean government has provided a lot of financial supports for the development of construction automation technology. However, despite of those efforts, automation systems at construction sites have rarely been employed. This is because the systems have not been developed with full consideration of the needs and environments on construction sites. Thus, the purpose of this study is to identify the critical success factors for efficient development of construction automation systems. This study compares and analyzes key factors for automated construction system(ACS) and construction information system(CIS). As a result, 'stability and reliability' in the ACS showed the highest importance while 'manageability' in the CIS was. Consequently, for the successful introduction of the ACS, technical capability and stability should be firstly considered to cope with dynamic construction environment, while the CIS should be built to enable efficient management and use of information. The result of this study can serve as an evaluation base for the current construction automation technologies and an index for more efficient technology development in the future as well.