• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.3-8
• /
• 2006

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design for axisymmetric products. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system can provide a flexible process based on either the reduction in the number of forming sequences by combining the possible two processes in sequence, or the reduction of deviation of the distribution on the level of the required forming loads by controlling the forming ratios. Especially in die design module optimal design technique and horizontal split of die insert were investigated for determining appropriate dimensions of components of multi-former die set. Results obtained, using the modules, enable the design and manufacture of a die set for a multi-former to be more efficiently performed.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.521-528
• /
• 2010

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

• 전기학회논문지
• /
• 제56권5호
• /
• pp.892-897
• /
• 2007

This paper presents the output filter design and the output characteristic analysis by cut-off frequency set up of the LCR filter on NPC multi-level inverter with trap-filter. The single-phase NPC three-level inverter operates at low switching frequency. The proposed LC trap filter is comprised of a conventional LCR output filter, by using LC trap filter the need for high damping resistor and low LC cut-off frequency is eliminated. Also. low damping resistor is increased the output filter system. The multilevel inverter system used NPC type inverter in proper system for high power application and controller is used DSP(TMS320C31). The effectiveness of proposed system confirmed the validity through SPICE simulation and experimental results.

• 산업경영시스템학회지
• /
• 제35권1호
• /
• pp.47-56
• /
• 2012

Service Parts Management is defined as a supply management associated with service parts from the part suppliers to the final customer. A series of process to improve the customer service level by forecasting the demand and to minimize cost by maintaining the inventory level is included. Uniqueness such as missing value correction, the data pattern analysis and planned order system is designed and implemented. Main feature of order management system is to calculate order amount and order time based on selection of optimal forecasting algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1208-1210
• /
• 1999

Design & operation power systems for meeting increase of electric power demand is becoming more difficult and complex. Some of limitations of conventional technology can be broken through by the application of superconductivity technology. This paper presents a new concept & image for the configuration of superconducting power system which has introduced superconducting(SC) generator, cable, transformer, fault current limiter(SFCL), SMES, etc. Engineering evaluation of each power apparatus and its assessment of application to power system were conducted. Futhermore, it is pointed that superconducting power system require a new operating condition. This is, SFCL should play a important part of quenching current level coordination to prevent the other superconducting devices from quenching. Its designing & operating condition including SFCL was discussed in viewpoint of quenching current level and insulation coordination of SC coil.

• 항공우주시스템공학회지
• /
• 제3권2호
• /
• pp.31-38
• /
• 2009

COMS On-board FDIR(Failure Detection, Isolation and Recovery) functions are implemented on the on-board software to satisfy the autonomy and failure tolerance requirements. This paper presents concepts of COMS Failure Management with hierarchical layers and addresses the characteristics of the FDIR layer from low level to high level. It is aimed at giving the reader the understanding how the COMS FDIR was designed and how works. It first recalls what are the system level applicable requirements, which are based on the COMS mission requirements. Then it describes the philosophy and structure of the FDIR and subsequently breaks it down into the several FDIR layers. It could be used as an important and useful reference of the information to design and develop an automatic FDIR mechanism in the future.

• 한국공작기계학회논문집
• /
• 제15권5호
• /
• pp.65-71
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD(Liquid Crystal Display) transfer system. In this paper, the $1^{st}$ DOE(Design of Experiment) is conducted to find out main-effect factors for the design of gripper part. Thirty-six analysis are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The $2^{nd}$ DOE is conducted to obtain RSM(Response Surface Method) equation. The CCD(Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level quality, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• 한국인터넷방송통신학회논문지
• /
• 제11권2호
• /
• pp.161-169
• /
• 2011

본 논문에서는 효율적인 SOC 전송 설계를 위한 새로운 레지스터 전송 단계 합성 방법을 제안한다. 기존의 레지스터 전송 단계 합성기들은, 하드웨어 기술 언어로 기술된 설계 사양을 순서회로로 변환하는 과정에서 불합리한 변환을 수행하고 순서 회로를 최적화 하는 과정에서 순서회로를 구성하는 레지스터와 조합회로를 분리하여 조합회로 부만을 최적화 한다. 본 논문에서는 이러한 방식의 레지스터 전송 단계 합성기들이 가지는 단점을 지적하고, 이런 단점을 극복하기 위한 새로운 레지스터 전송 단계 합성 방법을 제안한다. 또한, 제안된 방법을 감시용 시스템의 컨트롤러 설계에 적용한 결과를 제시함으로써 본 논문에서 제안하는 방법의 유용성을 입증한다.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.3882-3888
• /
• 2012

일반 간선열차에서 주로 사용하는 저상승강장과 수도권 전동차에서 주로 사용하는 고상승강장을 동시에 안전운행하기 위한 니즈기술로서, 저상/고상 승강장에 상관없이 승하차할 수 있는 철도차량 승강문 스텝장치가 필요하다. 본 연구에서는 이를 대비하여 저상/고상 승강장 겸용 승강문 스탭의 기능 및 제작 요구사항을 검토하였다. 세밀히 검토한 결과, 합리적 설계안은 자체 언더프레임의 손상 및 철도승강장의 이격거리 변동성을 최소화 할 수 있는 텔레스코픽 슬라이딩 스텝방식이라고 판단된다. 또한 다양한 요구조건을 고려하여 각 단계별 스텝 동작 과정 및 제어 흐름도를 제시하였다.

• 한국인터넷방송통신학회논문지
• /
• 제16권3호
• /
• pp.137-144
• /
• 2016

본 논문에서는 새로운 멀티프로세서 디자인을 위한 상위 수준 합성 시스템의 회로 복잡도 최적화 ILP 알고리즘을 제안하였다. 상위수준 합성에서 가장 중요한 연산자의 특성과 데이터패스의 구조를 분석하고, 멀티사이클 연산의 스케줄링 시 가상연산자 개념을 도입함으로써, 멀티사이클 연산을 구현하는 연산자의 유형에 관계없이 공통으로 적용시킬 수 있는 ILP 알고리즘을 이용하여 증명하였다. 기술된 알고리즘의 스케줄링 성능을 평가하기 위하여, 표준벤치마크 모델인 5차 디지털 웨이브필터에 대한 스케줄링을 행한 결과, 기존의 데이터패스 스케줄링 결과와 정확하게 일치함으로서, 제시된 모든 ILP 수식이 정확하게 기술되었음을 알 수 있었다.