• IE interfaces
• /
• 제9권1호
• /
• pp.73-82
• /
• 1996

The purpose of this research is to construct real-time image acquisition system for a line-scan inspection system as a computer vision system. To construct the line-scan inspection system, many problem arise. However, problems of image acquisitions using linear CCD are practically studied in this paper. These problems are concerned to proper lighting systems, relations with handling system, camera systems, and impacts due to the noise of environment. These problems are examined separately, and proper configurations for each case are suggested to construct the line-scan image acquisition system.

• IE interfaces
• /
• 제14권2호
• /
• pp.134-139
• /
• 2001

This paper describes an automatic design system for the parts that compose the power transmission. Power transmission is composed of shaft, gear, clutch, brake and housing. To design power transmission, there are many recurrent calculations and drawings needed with conventional design process. In this paper, we propose three dimensional automatic design system that reduce recurrent calculations and drawings. Developed system consists of two modules; 1) Design expert system module to assist determining design parameters of clutch, brake and gear. 2) Parametric modeling module to make three dimensional solid model automatically. The proposed system has been tested in the fields and found to be a useful system.

• IE interfaces
• /
• 제12권2호
• /
• pp.329-336
• /
• 1999

Job efficiency and productivity of a manufacturing system with frequent job schedule changes are affected by performance of information system between job order planners anti manufacturing device operators. This paper describes implementation of concurrent information system which can active identify machine status and dispatch job orders to operators in a machine shop. Client and server environment for various machinery is implemented using OSI based network between shop floor control system and manufacturing devices. Portability and scalability are among many characteristics of the implemented system. The developed client and server system is expected to realize high productivity for manufacturing device.

• Journal of KIISE:Software and Applications
• /
• 제31권5호
• /
• pp.677-696
• /
• 2004

Component-based software engineering (CBSE) composes reusable components and develops applications with the components. CBSE is admitted to be a new paradigm that reduces the costs and times to develop software systems. The high quality of component designs can be assured if the consistency and correctness among the elements of a component are verified with formal specifications. Current formal languages for components include only some parts of contracts between interfaces, structural aspects and behavioral aspects of component, component-based system, component composition and variability. Therefore, it is not adequate to use current formal languages in all steps of a component design process. In this paper, we suggest a formal language to specify component designs Component-Z. Component-Z extends Object-Z, adds new notations to specify components. It can be possible to specify interfaces, the inner structure of a component, inner workflows, and workflows among interfaces with Component-Z. In addition, Component-Z provides the notations and semantics to specify variability with variation points, variants and required interfaces. The relation between interfaces and components is defined with mapping schemas. Parallel operator is used to specify component composition. It can be possible to describe deployed components with the specifications of component-based systems. Therefore, the formal specification language proposed in this paper can represent all elements to design components. In the case study, we specify an account management system in a bank so that we show that Component-Z can be used in all steps of component design.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제15권11호
• /
• pp.1003-1008
• /
• 2002

In this paper, the estimation of lifetime with the various conditions of the interface between toughened epoxy and rubber which are consisting materials of underground power delivery system has been studied. After the measurement of the short time AC interfacial breakdown strength on macro interfaces at room temperature, the breakdown time at several voltages were measured under the constant voltages lower than the short time breakdown voltage. The long time breakdown voltage was calculated by using Inverse Power Law. Two types of interfaces was studied. One was the interface between toughened epoxy and EPDM(Ethylene Prorylene Diene Terpolymer). The other was the interface between toughened epoxy and silicon rubber. Interfacial pressure and roughness of interfaces was determined through the characteristic of short time AC interfacial breakdown strength. Oil condition was no oiled, low viscosity oiled and high viscosity oiled. High viscosity oiled interface between Toughened epoxy and silicon rubber had the best lifetime exponent, 20.69. and the breakdown voltage of this interface after 30 years was evaluated 19.27㎸.

• Journal of Institute of Control, Robotics and Systems
• /
• 제8권5호
• /
• pp.393-400
• /
• 2002

Teleoperation enables an operator to manipulate remote objects. One of the main goals in teleoperation researches is to provide the operator with the fueling of the telepresence, being present at the remote site. For these purposes, a master robot must be designed as a bilateral control system that can transmit position/force information to a slave robot and feedback the interaction force. A newly proposed impedance algorithm is applied for the control of a haptic interface that was developed as a master robot. With the movements of the haptic interface for position/force commands, impedance parameters are always varying. When the impedance parameters between an operator and the haptic interface and the dynamic model are known precisely, many model based control theories and methods can be used to control the device accurately. However, due to the parameters'variations and the uncertainty of the dynamic model, it is difficult to control haptic interfaces precisely. This paper presents a robust adaptive impedance control algorithm for haptic interfaces.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제11권6호
• /
• pp.177-182
• /
• 2011

These days as there are growing the number of vessel sailing, diverse aquaculture industries, fishing works, and leisure activities in coastal area, the diverse communication services have been required for secure voyage information. This paper addresses the scheme for costal area service using mobile IP router with multiple interfaces. For this, this system has the wireless interfaces, such as WiBro, HSDPA, and WLAN that can provides vessels with divers communication services, and can provide the vessels with the diverse information communication services in real-time through wireless communication network installed in costal area. So this can provide the infrastructure that supplies the authorized seamless information communication services.

• Composites Research
• /
• 제13권6호
• /
• pp.30-38
• /
• 2000

In this paper, a system of falling weight impact tester was built up to evaluate the impact energy absorbing characteristics and impact strength of CFRP laminate plates in consideration of stress wave propagation theory. Delamination area of impacted specimens for the different ply orientation was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the more absorbed energy. Hybrid specimen containing GFRP layer was higher than that of normal specimens.

• Journal of Information Management
• /
• 제35권3호
• /
• pp.125-138
• /
• 2004

The purpose of this study is to propose a hierarchical user interfaces for browsing the knowledge structure of a single document. To generate the hierarchical knowledge structure, hierarchical term clustering and cluster representative term selection were performed with a single thesis in information science field, and the result was applied to design the interfaces which browse a single document hierarchically using multidimensional scaling. The interfaces can be applied to develop the user-friendly information retrieval system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권4호
• /
• pp.263-273
• /
• 2011

The diffuse interface model of Saurel et al. (2008) is used for the computation of compressible cavitating flows around underwater missiles. Such systems use gas injection and natural cavitation to reduce drag effects. Consequently material interfaces appear separating liquid and gas. These interfaces may have a really complex dynamics such that only a few formulations are able to predict their evolution. Contrarily to front tracking or interface reconstruction method the interfaces are computed as diffused numerical zones, that are captured in a routinely manner, as is done usually with gas dynamics solvers for shocks and contact discontinuity. With the present approach, a single set of partial differential equations is solved everywhere, with a single numerical scheme. This leads to very efficient solvers. The algorithm derived in Saurel et al. (2009) is used to compute cavitation pockets around solid bodies. It is first validated against experiments done in cavitation tunnel at CNU. Then it is used to compute flows around high speed underwater systems (Shkval-like missile). Performance data are then computed showing method ability to predict forces acting on the system.