• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.543-550
• /
• 2009

This study was performed to prove the possibility of utilizing short plastic fibers made for recycled polyethylene terephthalate (RPET) as a structural material. In order to verify the capacity of RPET fiber, it was compared with polypropylene (PP) fiber, most widely used short synthetic fiber, for fiber volume fraction of 0%, 0.5%, 0.75%, and 1.0%. To measure material properties such as compressive strength, split tensile strength, appropriate tests were performed. Also, to measure the strength and ductility capacities of reinforced concrete (RC) member casted with RPET fiber added concrete, flexural test was performed on RC beams. The results showed that compressive strength decreased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. Split cylinder tensile strength of RPET fiber reinforced concrete increased slightly as fiber volume fraction increased. For structural member performance, ultimate strength, relative ductility and energy absorption of RPET added RC beam are significantly larger than OPC specimen. Also, the results showed that ultimate flexural strength and ductility both increased, as fiber volume fraction increased. These trends are similarly observed in the tests of PP fiber added concrete specimens. The study results indicate that RPET fiber can be used as an effective additional reinforcing material in concrete members.

• Environmental and Resource Economics Review
• /
• v.31 no.1
• /
• pp.1-30
• /
• 2022

This study is to investigate consumers' acceptance and their willingness to pay for clothes made of materials with low microplastic emissions as an alternative to synthetic fibers made of plastics by applying the contingent valuation method. A nationwide web-based survey was conducted for 1,052 respondents proportional to region, age, and gender during February 2021. More than 75% of the sample expressed intentions to purchase microplastic emission-reducing clothing instead of synthetic fiber clothing, and more than 80% of them have stated their willingness to pay for additional prices. A variation of Heckman's sample selection model was adopted to estimate factors affecting respondents' intentions to pay for additional prices, in which the probit model of intentions to purchase the clothing with alternative materials was used as a sample selection equation. While respondents were sensitive to the amounts of price increases suggested in the CV scenario, they expressed high acceptance and preferences for eco-friendly materials regardless of the microplastic emission-reducing levels. Consumers in the circular economy were willing to pay for the range of 41,000 to 51,000 won for a pair of clothing made with microplastic emission-reducing materials. In addition, as the microplastic emission-reducing rate has increased from 50% to 80%, the willingness to pay estimates were also significantly increased, ranging from 41,000~50,500 to 42,000~51,700 won.

• The Research Journal of the Costume Culture
• /
• v.6 no.4
• /
• pp.26-38
• /
• 1998

This paper is based on a survey of consumers 'opinions on underwears. The questions in the survey dealt with what materials were used to manufacture underwears, which underwears were worn together in combinations, and how comfortable underwears were. In addition, the respondents were asked about how many pieces of different underwears they posses. Through such research, this paper aims to provide a guide to manufacturing domestic underwears that are competitive against foreign bands. 336 women in their twenties, thirties, forties and fifties from Seoul and it's suburbs were surveyed. Statistical analysis was performed by calculating the average, frequency and standard deviation, and through one-way analysis and the Duncan test. The following are the results of the study : 1. Consumers were moderately satisfied with Korean-made underwears. In order to complete with foreign brands, products with high consumer-satisfaction levels must be produced. 2. Upper garments usually consisted of brassieres with shoulder straps and sleeveless shirts. For lower underwears, most people tended to wear panties under girdle, with garlets on top. This is most likely the resut of more people wearing slacks than skirts. 3. Consumer in their twenties had anaverage of 1.71 slips, while those in their thirties had 3.07, those in their forties and 3.25, and people in their fifties had 3.88 slips. Thus the number of slips a consumer possesses increases as age increases. for socks, people in their twenties had 7.4 pairs on average, those in their thirties had 5.5, those in their forties had 6.7, and those in their fifties had 5.3. Thus, those in their twenties possessed the most number of socks. Consumers in their twenties also had the largest proportion of socks among all the types of hosiery combined, with 47.1% of their hosiery being socks. 4. Consumers did tend to prefer cotton underwears, but according to the type of underwears, producting using mixed fabrics of cotton and synthetic fibers were also frequently worn. 5. The shape and form of underwear that consumers prefer in a ceratin time frame varies according to the latest fashion in outer wear. Therefore, planning design of underwear products by predicting the future trend of outer wear fashion is necessary.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.958-968
• /
• 2003

The purpose of this study was to clarify the different mechanical properties of fabrics among the theme groups classified by fashion fabric trend. This study can be useful for fabric marketers and planners to design new products. In order to carry out this study, the fabric samples of representative theme for‘2002/03 F/W fashion fabric trend were collected from a fashion company and were measured to analyze the mechanical properties, hand value(H.V) and total hand value(T.H.V) by KES-FB System. The results were as follows. 1. The theme-A of‘Luxury, Elegance’was consisted of wool, rayon and PET and had a lower B, 2HB of bending properties and a lower G and 2HG5 of shear properties. The theme-B of‘Technical, Functional’was consisted of synthetic fibers such as PET, PA, PU and elastic fiber and had a higher MIU and a lower MMD, SMD of surface properties. The theme-C of‘Vintage, Aged’was consisted of mostly cotton and had the highest B and 2HB. The theme-D of‘Fancy, Airy’was consisted of mostly woolen wool, polyacryl and polyamide and had a high MMD and SMD of surface properties and a high LC and RC of compression properties. 2. As the results of analyzing H.V and T.H.V through KES-FB system, the theme-A showed a higher Smoothness and lower Stiffness. The theme-B had a lower Smoothness, Fullness, Soft feeling and T.H.V and the theme-C had the highest Stiffness. The theme-D showed the highest Fullness and Soft Feeling but the lowest Stiffness.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.53-58
• /
• 2008

New dyeable PP fiber and several products from it has been developed through dispersing polyester copolymer into PP resin by a Korean synthetic fiber manufacturer and its colleagues. The dyeing properties of PET/dyeable PP double knit fabric were examined with three different types of disperse dye in this study. It was found that the disperse dye, exhausted on dyeable PP at early stage of dyeing, migrated to PET at elevated dyeing temperature when two fibers were dyed in the same dye bath. The ratios of dye distribution between two substrates dyed at $120^{\circ}C$ and $130^{\circ}C$ showed no difference. S type disperse dyes showed good build-up properties and acceptable color fastness while high light fastness type exhibited the lowest amounts of exhaustion but excellent color fastness. It might be concluded that the most appropriate dye for PET/dyeable PP double knit fabric was S type, and that some color difference between PET side and dyeable PP side was unvoidable.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.485-489
• /
• 2017

Polyethylene terephthalate (PET) has been widely applied in polymers and packaging industries to produce synthetic fibers, films, drink bottles or food containers. Therefore, it has become one of the major plastic wastes. In this article, glycolysis known as one of the main methods in PET chemical recycling was investigated using a glycol to break down the polymer into a monomer. Glycolysis of PET and ethylene glycol was performed in a micro-tubing reactor under various conditions. The effect of glycolysis conditions on the product distribution was investigated at experimental conditions of the EG/PET ratio of 1~4, the reaction time of 15~90 min and the reaction temperature of $250{\sim}325^{\circ}C$ with Mn and Cu catalysts. The highest yield of bis (2-hydroxyethyl) terephthalate monomer (BHET) was obtained as 89.46 wt% under the condition of the reaction temperature of $300^{\circ}C$ and the time of 30 min using 10 wt% $Cu/{\gamma}-Al_2O_3$ catalyst, with the PET and ethylene glycol ratio of 1 : 2.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.4 no.3
• /
• pp.9-15
• /
• 2002

Compared with synthetic dyes, natural dyes have inferior colorfastness as a result of the exposure of the material to any environment that may be encountered during the processing, testing, storage, display or use of the dyed materials. Especially, colors on fabrics fade excessively after washing. Therefore, it is problem to infer the historic textiles with natural-dyed fabrics. The object of this study is to analyse the factors affected to colorfastness and color change during washing. In experimental, fifteen natural dyes were dyed by the Korean traditional dyeing methods onto natural fiber fabrics: cotton, silk, ramie, and flex. Total 49 dyed fabrics in combination with dyes and fibers were used for the specimen. The Launder-Ometer was used for evaluating the effects of exposure to repetitive washing from 1 to 20 washing cycles (KS K 0430). Color difference(ΔE) in the CIEL＊A＊B＊ color-order system were determined by spectrophotometer at 100 bserver. Washing caused significant changes in the color of natural-dyed fabrics. The degree and nature of color changes on the fabrics were dependent on the combination of fiber and the dye type used. The groups of violet(Lithospermum erythrorhizon Sieb.et Zucc) and black color(Ailanthus altissima Swingle, Phus trichocarpa Miq) yielded excellent colorfastness to repetitive washing. The group of indigo blue color(Polygonum tinctorium Lour.) was also very resistant to color change in washing except silk. Whereas the dye groups of Red, Yellow, Orange, Brown colors indicated greatest changes in color, particularly Carthamus tinctorius L.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.1
• /
• pp.56-64
• /
• 1981

The textile fabric contains the functions of sanitation, decoration, wearing style and washing in the practical use. Among various tetile fiber, silk has less utilities than synthetic fiber in practical use although silk has good benefits of the high quality of silk fabric. Thus no textile fiber, neither natural norsynthetic, has all the functions. In this sense, many compound fabrics have been improved to reveal various functions of fabric However, this has been disturbed with the problem of dyeing, expecially in the case of compound fabric of silk. The work is carried out to improve the dyeing method of compound fabric of polyester and silk. The results obtained are as follows: 1. In the dyeing of compound fabric(P/S fabric), azo dyes was more suitable than anthraquinone dyes. 2. According to the carrier, dyeing spot was appeared by the high concentration in bath. 3. Degree of dye fixation was decreased in dyeing of methylnaptharine carrier(D.N) and anion disperser(T.S). 4. The affinity of dye was suitable in the dyeing bath of azo dye, trichlorobenzene carrier and nonion disperser. 5. Dye fixation of silk side in compound fabric by acid dye showed higher in acid bath of dyeing. 6. In printing of silk and polyester compound fabric, it must be understood relationship among fibers, dyes, and steaming conditions.

• Textile Coloration and Finishing
• /
• v.1 no.1
• /
• pp.54-62
• /
• 1989

The woven fabric composed of nylon 6 filaments was treated with aqueous solutions (20, 30, 40, 50, 60%) of formic acid at 3$0^{\circ}C$ for 10 minutes under unrestrained condition, and the shrinkage behavior and some kinds of properties were examined. The shrinkages of the constituent yarns and fabric were increased with formic acid concentration, but they were lower than that of the original filaments because of fabric-structural factors. And the shrinkage of the warp was lower than that of the weft because of the residual stress from weaving process. By the restraint forces such as fabric-structural factors and residual stress, the constituent filaments were damaged partially at 60% of formic acid concentration and the degree of damage on the warp was greater than on the weft. And though the fabric count were increased overall, the spacing between the warps was decreased prior to the weft and eliminated nearly at 60% of formic acid concentration. The thickness, tensile strength, elongation, and handle value of fabric were increased overall with formic acid concentration excepting that the tensile strength for both the warp and weft directions and the elongation for the warp direction were decreased instead by the damage of yarns. But the crease recovery was decreased except the case of the weft direction at 60% of formic acid concentration.

• Composites Research
• /
• v.28 no.5
• /
• pp.265-269
• /
• 2015

Development of simple and efficient method for large-scale production of mechanically strong and electrically conductive graphene fiber is highly desirable for practical applications, such as fiber-reinforced composites, wearable electronics, and electromagnetic irradiation shielding. Here, we present a facile approach for the preparation of amine-functionalized graphene fibers by simple wet-spinning of diamine-functionalized graphene oxide (GO-$NH_2$), which is used because of its synthetic convenience, good dispersity, and scalable production with low cost. The amine-functionalized graphene fiber shows high electrical and mechanical properties compared to pristine graphene oxide fiber due to the electrostatic interaction between amine groups and electronegative functional groups of graphene oxide.