• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.452-455
• /
• 2000

Diamond thin films were synthesized on WC-Co substrate at various experimental parameters using 13.56MHz RF PACVD(radio frequency plasma-assisted chemical vapor deposition). In order to increase the nucleation density, the WC-Co substrate was polished with 3$\mu\textrm{m}$ diamond paste. And the WC-Co substrate was pretreated in HNO$_3$: H$_2$O = 1:1 and O$_2$ plasma. In H$_2$-CH$_4$gas mixture, the crystallinity of thin film increased with decreasing CH$_4$concentration at 800W discharge power and 20torr reaction pressure. In H$_2$-CH$_4$-O$_2$gas mixture, the crystallinity of thin film increased with increasing O$_2$concentration at 800W discharge power, 20torr reaction pressure and 4% CH$_4$concentration.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.328-331
• /
• 2000

Carbon nanotube(CNT) was successfully grown on Ni-W alloyed substrate by applying PECVD technique(Plasma Enhanced Chemical Vapor Deposition). As a catalyst, Ni-W alloyed substrate was prepared by mechanical alloying method. In order to find the optimum growth condition, initially two different types of gas mixtures such ac $C_2$H$_2$-H$_2$and $C_2$H$_2$-MH$_3$were systematically investigated by adjusting results on the mixing ratio in temperature range of 500 to 80$0^{\circ}C$. In this work, we will report the preliminary results on the CNT processed by PECVD, which were characterized by XRD, SEM and TEM. Finally we will evalute the effect on CNT growth by changing many processing parameters, such as typical gas, mixing ratio between 2 mixture, plasma power and etc.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.525-530
• /
• 1995

The main objective of this study is to develop a gripper mechanism that can be employed for assembly and removal tasks of a nozzle-dam of steam gererator which is one of the nuclear reactor maintenance process. Brief description of the open-close type gripper mechanism, its postion analysis, and its kinematic amalysis are given. The optimal design of the gripper mechanism with slipping on its two gripping surfaces is considered. As an optimaldesign index, the ratio of the actuator force of prismatic cylinder to gripping load is proposed. Then, based on this index the optimal design synthesis is careied out to identify values of optimal design parameters for the gripper mechanism.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.666-669
• /
• 2004

Substructures position is considered as design parameter to obtain optimal structural changes to raise its dynamic characteristics. In conventional SDM (structural dynamics modification) method, the layout of modifying substructures position is first fixed and at that condition the structural optimization is performed by using the substructures size and/or material property as design parameters. But in this paper as a design variable substructures global translational and rotational position is treated. For effective structural modification the eigenvalue sensitivity with respect to that design parameter is derived based on measured frequency response function. The optimal structural modification is calculated by combining eigenvalue sensitivities and eigenvalue reanalysis technique iteratively. Numerical examples are presented to the case of beam stiffener optimization to raise the natural frequency of plate.

• Bulletin of the Korean Chemical Society
• /
• 제17권8호
• /
• pp.688-693
• /
• 1996

Tetradentate Schiff base ligands derived from 2-hydroxy-1-naphthaldehyde and aliphatic diamine have been synthesized. Cu(Ⅱ) complexes of Schiff base ligands have been synthesized from the free ligands and copper acetate. The mole ratio of ligand to copper was identified to be 1:1 by the result of elemental analysis and Cu(Ⅱ) complexes were in a four-coordinated configuration. The electrochemical redox process of Cu(Ⅱ) complexes in a DMF solution has been investigated by cyclic voltammetry, chronoamperometry, differential pulse voltammetry, and controlled potential coulometry. The redox process of Cu(Ⅱ) complexes is one electron transfer process in quasi-reversible and diffusion-controlled reaction. The electrochemical redox potentials and the kinetic parameters of Cu(Ⅱ) complexes are affected by the chelate ring of Schiff base ligands.

• Bulletin of the Korean Chemical Society
• /
• 제18권4호
• /
• pp.379-384
• /
• 1997

High quality MCM-41 is prepared from a gel of molar composition SiO2:0.20 CTACl:0.18 TMAOH:25 H2O aged at 20 ℃ for 24 hours before crystallization lasting for 48 hours. The (110) and (200) peaks of XRD pattern of high quality MCM-41 are unusually well resolved and the FWHM (full-width-at-half-maximum) of the (100) peak is 0.13° for as-prepared MCM-41 and 0.21° for calcined one, which indicate well-developed crystals. The properties of the crystal depend on the source and concentration of the reactants and the gel aging time. There is no induction period in the course of the synthesis, which is conveniently monitored by pH measurement. Gel aging, during which a spatial distribution of silicate polyanions and micellar cations is established, is essential for preparing high quality MCM-41. Surfactants with the same cationic organic group but different counteranions change the crystallization behavior. Highly basic gel (pH=12.6) favours the lamellar product; the quality of MCM-41 is lower as insufficient TMAOH is available to dissolve the silica.

• Bulletin of the Korean Chemical Society
• /
• 제22권12호
• /
• pp.1366-1370
• /
• 2001

Thin films of the SiO2-TiO2-PDMS composite material have been prepared by the sol-gel dip coating method. Acid catalyzed solutions of tetraethoxy silane (TEOS) and polydimethyl siloxane (PDMS) mixed with titanium isopropoxide Ti(OiPr) were used as precursors. The optical and structural properties of the organically modified 70SiO2-30TiO2 composite films have been investigated with Fourier Transform Infrared Spectroscopy (FT-IR), UV-Visible Spectroscopy (UV-Vis), Differential Thermal Analysis (DTA) and prism coupling technique. The films coated on the soda-lime-silicate glass exhibit 450-750 nm thickness, 1.56-1.68 refractive index and 88-94% transmittance depending on the experimental parameters such as amount of PDMS, thermal treatment and heating rate. The optical loss of prepared composite film was measured to be about 0.34 dB/cm.

• Journal of Applied Biological Chemistry
• /
• 제61권4호
• /
• pp.351-355
• /
• 2018

Treatment towards wound healing, a complex and dynamic process, has been given a great deal of efforts in the last few decades. Focus has been imposed on developing wound dressings that meet the requirements for proper wound healing. In this study, hydrogel made from blends of poly (vinyl alcohol) and ${\beta}$-1,6-branched-${\beta}$-1,3-glucan (beta-glucan) were synthesized by modified solvent casting method for wound dressing application. Optimization of hydrogel composition and analysis of wound dressing parameters such as stability and fluid uptake capacity (in the presence of water, saline and different pH solutions) has been studied. The result indicated that the PVA/beta-glucan hydrogel hold its structural integrity even at alkaline pH (pH~9) and upholds fluids four times of its original weight. Thus, the developed hydrogel is expected to be a promising candidate as wound dressing.

• 마이크로전자및패키징학회지
• /
• 제27권4호
• /
• pp.39-45
• /
• 2020

The Cu/Cu2O/CuO photoelectrode has been successfully fabricated by Rapid Thermal Annealing technique. The structural characterization of fabricated photoelectrode was performed using X-Ray diffraction, while elemental composition of the prepared material has been checked with X-Ray Photoelectron Spectroscopy. The synthesis parameters are optimized on the basis of photoelectrochemical performance. The best photoelectrochemical performance has been observed for the Cu/Cu2O/CuO photoelectrode fabricated at 550 ℃ oxidation temperature and oxidation time of 50 seconds with highest photocurrent density of -3 mA/㎠ at -0.13 V vs. RHE.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.316-325
• /
• 2018

Aluminum based metal-organic framework using a di-carboxylate linker succinic acid (Al-SA MOF), are synthesized in water with minimal generation of secondary pollutants. The physicochemical properties of Al-SA MOF were examined, followed by its utility for the adsorption of Acid Black 1 (AB1) in aqueous media. Influences of key parameters such as pH, contact time, initial AB1 concentration,temperature, and selectivity on the adsorption process were assessed. A series of adsorption mechanisms are proposed, which involve electrostatic, hydrogen bonding, and hydrophobic interactions. These findings suggest that Al-SA MOF is a potent candidate in removing complex azo dyes molecules from aqueous media.