• Journal of the Korean institute of surface engineering
• /
• v.36 no.5
• /
• pp.357-363
• /
• 2003

The aim of this work is the synthesis of a-C:H films from methane gas using surface spark discharge at the atmospheric pressure. Properties of these films have been investigated as functions of energy W delivered per a methane molecule in the discharge. The method enables the coatings to be deposited with high growth rates (up to $100 \mu\textrm{m}$/hour) onto large-area substrates. It is shown that the films consist of spherical granules with diameter of 20∼50 nm formed in the spark channel and then deposited onto the substrate. The best film characteristics such as minimum hydrogen-to-carbon atoms ratio H/C=0.69, maximum hardness $H_{v}$ =3 ㎬, the most dense packing of the granules and highest scratch resistance has been obtained under the condition of highest energy W of 40 eV. The deposited a-C:H coatings were found to be more soft and hydrogenated compared to the diamond-like hydrogenated (a-C:H) films which obtained by traditional plasmaenhanced chemical vapor deposition methods at low pressure (＜10 Torr). Nevertheless, these coatings can be potentially used for scratch protection of soft plastic materials since they are of an order harder than plastics but still transparent (the absorption coefficient is about $10^4$∼$10^{5}$ $m^{-1}$ At the same time the proposed method for fast deposition of a-C:H films makes this process less expensive compared to the conventional techniques. This advantage can widen the application field of. these films substantially.y.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.210-215
• /
• 2002

This thesis is contents on the crystal grown by the solide phase method at $925^{\circ}C$ with orthorhombic structure that $LiMnO_{2}$ active material synthesised with precurse $Mn_{2}O_{3}$ and $LiOH.H_{2}O$ material to get three voltage level. The porosity analysis of the grown crystal in secondary batteries $LiMnO_{2}$ thin film is $1.323E+02\AA$ of the average pore diameter of powder particles and its structure to be taken the pore diameter was prepared. Adding voltage area to get properties of charge and discharge of which experiment result of $LiMnO_{2}$ thin film area 2.2V~4.3V, current and scan speed were 0.1mAh/g and $0.2mV/cm^{2}$ respectively, and properties of the charge and discharge to be got optimum experiment condition parameter and density rate of Li for analyze that unit discharge capacity with metal properties is 87mAh/g was 96.9[ppm] at 670.784[nm] wavelength, and density rate of Mn analyzed 837[ppm] at 257.610[nm]. It can be estimated the quality of thin film that wrong cell reject from the bottle of electrolyte. The results of SEM and XRD were the same that of original researchers.

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.522-529
• /
• 1989

Symmetrical divinyl ketones and divinyl ${\alpha}$-diketones were synthesized in moderately good yields through palladium catalyzed carbonylative homocoupling reaction of vinylic halides. Divinyl ${\alpha}$-diketones were obtained in the highest yield in the presence of 10 atm of carbon monoxide, using 2 mol% ligand added to palladium(II) acetate as catalyst and three equivalents of tributylamine as base in polar solvent at $100^{\circ}C$. Divinyl ketones were synthesized mainly under atmospheric pressure of carbon monoxide. The reaction was also proceeded to several other vinylic halides under the above reaction condition. Thus, divinyl ketones and divinyl ${\alpha}$-diketones were synthesized selectively as expected.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.800-807
• /
• 2005

Cathode material, $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$, for low temperature SOFC was prepared by the Glycine-Nitrate synthesis Process (GNP). Characteristics of the synthesized powders were studied with controlling the pH of a precursor solution. Highly acidic precursor solution increased a perovskite forming temperature. It is considered that Ba and Sr cannot complex by carboxylic acid group of glycine, because under highly acidic condition the caboxylic group mainly combined with H+ insead of alkaline earth cations. A lack of bond between cations and glycine resulted in selective precipitation of the elements during evaporation of the precursor solution. In case of using precursor solution with pH %2\~3$, a single perovskite phase was obtained at $1000^{\circ}C$. Polarization resistance of $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$ was measured by AC impedance spectroscopy from the two electrode symmetric cell. Area specific resistance of the $(Ba_{0.5}Sr_{0.5})_{0.99}Co_{0.8}Fe_{0.2}O_{3-\delta}$ air electrode at $500^{\circ}C\;and\;600^{\circ}C$ were $0.96{\Omega}{\cdot}cm^2\;and\;0.16{\Omega}{\cdot}cm^2$, respectively.

• YAKHAK HOEJI
• /
• v.55 no.2
• /
• pp.116-120
• /
• 2011

Abnormal proliferation of vascular smooth muscle cells (VSMCs) plays an important role in the development and progression of proliferative cardiovascular diseases, including hypertension and atherosclerosis. To find antiproliferative agent (A)-8 had inhibitory effect on VSMCs proliferation. Therefore, we examined the antiproliferative effect of A-8, a newly synthesized obovatol derivative. To investigate the antiproliferative effect of A-8, we examined cell counting and [$^3H$]-thymidine incorporation assays. The pre-incubation of A-8 (1~4 ${\mu}M$) significantly inhibited proliferation and DNA synthesis of 5% fetal bovine serum (FBS)-stimulated rat aortic VSMCs in concentration-dependent manner. Whereas, A-8 did not show any cytotoxicity in rat aortic VSMCs in this experimental condition by WST-1 assay. In addition, A-8 significantly inhibited 5% FBS-induced cell cycle progression in rat aortic VSMCs. These results show that A-8 may be developed as a potential antiproliferative agent for treatment of angioplasty restenosis and atherosclerosis. Furthermore, A-8 should be examined for further clinical application either as a single agent or in combination with other angioplasty restenosis or atherosclerosis agents.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3387-3390
• /
• 2013

Catalytic gasification of mandarin waste residue was carried out using direct and indirect catalyst-contact methods for the first time. In the indirect method, non-catalytic reaction in a reactor was followed by catalytic upgrading of vapor product in another reactor. Two different catalysts, $Ni/{\gamma}-Al_2O_3$ and $Ni/CeO_2-ZrO_2$, were employed. $CeO_2-ZrO_2$ support was prepared using hydrothermal synthesis in supercritical water. The catalysts were characterized by $H_2$-temperature programmed reduction and Brunauer-Emmett-Teller analyses. Under the condition of equivalent ratio (ER) = 0, the indirect catalyst-contact method led to a higher gas yield than the direct method. Under ER = 0.2, the yield of biogas obtained over $Ni/CeO_2-ZrO_2$ was higher than that obtained over $Ni/{\gamma}-Al_2O_3$. Also, the coke formation of $Ni/CeO_2-ZrO_2$ was lower than that of $Ni/{\gamma}-Al_2O_3$. Such results were attributed to the higher reducibility and better lattice oxygen mobility of $Ni/CeO_2-ZrO_2$, which were advantageous for partial oxidation reaction.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.69-75
• /
• 1986

8-Hydroxyquinoline-resorcinol(8-HQR) and 8-hydroxyquinoline-resorcinol-salicylic acid (8-HQRS) chelate resins were prepared by the condensation reaction of 8-hydroxyquinoline, or 8-hydroxyquinoline-salicylic acid, in the presence of resorcinol with formaldehyde. The ion exchange capacities of 8-HQR and 8-HQRS resins were 4.1 meq/g and 5.4 meq/g, respectively. The adsorption and distribution coefficient of metal ions, such as Fe(III), Cu(II), Pb(II), Co(II) and Ni(II) on these resins were discussed. The adsorption of metal ions on these chelate resins showed that the maximum adsorption condition is pH 7. And the distribution coefficient of metal ions on these resins was increased with decreasing of hydrochloric acid concentration.

• Journal of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.275-279
• /
• 1991

Ultra-fine alumina, ${\alpha}-Al_2O_3$, with ${\phi}$ = 0.1∼0.5 ${\mu}$m was obtained from pure ammonium aluminum sulfate(alum) as the thermal decomposition product. Pure alum(> 99.7%) could be prepared by the precepitation and the successive recrystallization in an acidic aqueous solution at pH = 1.5∼2.5, which was theoretically predicted by only considering the concentrations of hydroxide and carbonate for aluminum and sodium in the solution, and also experimentally confirmed as the optimum precepitation condition for alum without forming any impurities like aluminum hydroxide or sodium one.

• Restorative Dentistry and Endodontics
• /
• v.24 no.3
• /
• pp.437-446
• /
• 1999

Porphyromonas endodontalis(P. endodontalis) is one of the important causative bacteria of pulpal and periapical disease. P. endodontalis has lipopolysaccharide(LPS) and it plays a major role in stimulating the synthesis and release of cytokines from immune cells and prostaglandin $E_2$ from host cells. The purpose of this study is to prepare LPS from P. endodontalis and to evaluate the effect of LPS on membrane permeability of fibroblast. P. endodontalis ATCC 35406 was cultured in anaerobic condition, and LPS was extracted. LPS was confirmed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Human periodontal ligament cell, colon fibroblast(CCD-18Co, KCLB 21459) and skin fibroblast(Detroit 551, KCLB 10110) were perfused with 0.01% P. endodontalis LPS solution, high concentration of $K^+$ solution and $Ca^{2+}$-free solution, $Ca^{2+}$ concentration ratio was measured by microfluorometry. 1. Intracellular $Ca^{2+}$ concentration was not changed in human periodontal fibroblast and skin fibroblast(Detroit 551) stimulated by P. endodontalis LPS. 2. Intracellular $Ca^{2+}$ concentration was increased in colon fibroblast(CCD-18Co) stimulated by P. endodontalis LPS. 3. Colon fibroblast(CCD-18Co) has voltage dependent $Ca^{2+}$ channel activated by high concentration of $K^+$ solution. 4. P. endodontalis LPS has no effect on the increase of intracellular $Ca^{2+}$ concentration during perfusion of $Ca^{2+}$-free solution.

• Korean Journal of Materials Research
• /
• v.24 no.8
• /
• pp.407-412
• /
• 2014

Currently, diopside ($MgCaSi_2O_6$) crystal glaze is used frequently for pottery works or in earthen wares, though the process is not straightforward. However, to create and control the positions and sizes of the crystals in desired amounts when making pottery is difficult. To solve this problem, a diopside crystal seed was created at a temperature of $1450^{\circ}C$. After planting this seed in the glaze, a glaze combination and firing process which allows a user to create crystals with the desired position and at the desired size were established. In addition, in order to investigate the creation process of the crystals, the growth patterns of the crystals were observed and examined using Raman spectrography and XRD and SEM analyses. As a result, the optimum synthesis condition of the diopside seed was created by mixing 1 mole of $CaCo_3$, 0.2 mole of $(MgCo_3)_4(MgCoH)_2{\cdot}5H_2O$ and 2 moles of $SiO_2$ and then applying a firing process to the mixture at $1,450^{\circ}C$ for 30 minutes. The optimum glaze content of the seed was 70 % feldspar, 20 % limestone and 10 % $MgCo_3$. For the firing process, it was confirmed that the size of crystal is larger with a longer firing time at $1100^{\circ}C$ by completing a two-hour process at $1280^{\circ}C$. In addition, the diopside crystal has columnar structure and is less than $1{\mu}m$ in size.