• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1039-1051
• /
• 2007

In this paper, a new lip synchronization control method is proposed to achieve very low delay in the video communication. The lip control is so much vital in video communication as delay reduction. In a general way, to control the lip synchronization, both the playtime and capture time calculated from RTP time stamp are used. RTP timestamp is created by stream sender and sent to the receiver along the stream. It is extracted from the received packet by stream receiver to calculate playtime and capture time. In this paper, we propose the method of searching most adjacent corresponding frame of the audio signal, which is assumed to be played with uniform speed. Encoding buffer of stream sender is removed to reduce the buffering delay. Besides, decoder buffer of receiver, which is used to correct the cracked packet, is resulted to process only 3 frames. These mechanisms enable us to achieve ultra low delay less than 100 ms, which is essential to video communication. Through simulations, the proposed method shows below the 100 ms delay and controlled the lip synchronization between audio and video.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.502-513
• /
• 2004

This paper proposes a symbol synchronization method in the IEEE 802.11a wireless OPDM system, which uses only signs of the in-phase and the quadrature signals in the short preamble. The short preamble is sampled with 2 tines of Nyquist sampling rate and both of the autocorrelation and the cross-relation are used in the proposed method. This method has some advantages that the ACG (Automatic Gain Control) can be processed concurrently during the short preamble and its implementation is not much complicated. The proposed symbol synchronization method is verified through simulations on frequency offset, multi-path and white Gaussian noise.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.12
• /
• pp.1027-1033
• /
• 2016

There is an increasing need for manufacturing systems to produce batches in small quantities. Such manufacturing systems are significantly difficult to develop with conventional automation equipment. Recently, several research groups have applied industrial dual-arm robots to cell production lines. A synchronization method for robots is necessary for the cell production process when robots work in a shared workspace. Conventional automation factories do not need this method because the main control system operates all of the machines or robots. However, our intended application for the developed robot is in small manufacturing environments that cannot install an expensive main control system. We propose an inexpensive and high-performance method with a simple digital in/out channel using a real-time communication protocol. The developed method was validated in a pilot production line for cellular phone packing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.11
• /
• pp.963-968
• /
• 2003

A feedback control implementation for a high speed train pressurization system is proposed based on CAN (Controller Area Network). Firstly, system model including network latencies by CAN arbitration mechanisms is proposed, and an analytical compensation method of control parameters based on the system model is proposed for the network latencies. For the practical implementation of the control, global synchronization is adopted for controller to measure network latencies and to utilize them for the compensation of the control parameters. Simulation results are shown with practical tunnel data response. The proposed method is evaluated to be the most effective for the system through the control performances comparing among a controller not considering network latencies, other two off-line compensation methods, and the proposed method.

• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.14-20
• /
• 2009

This paper describes synchronization concept and algorithm of the reverse DS-SS/TDMA control channel to handle satellite terminals which are distributed through the mission area. Military satellite control channel should have ECCM capabilities and handle more than several hundreds satcom terminals simultaneously. DS-SS/TDMA control channel can satisfy these demand but it spend much synchronization time. Proposed algorithm insert the preamble which is divided with several short sub bins prior to control data and use the parallel matched filtering searcher for each sub bin. As a result of the test, proposed algorithm can acquire most of control channel packet successfully within several milliseconds in severe jamming environment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.547-555
• /
• 2007

In order to transmit energy generated through the stator winding of a doubly-fed induction generator (DFIG), we need to synchronize the generated voltage vector with the grid voltage vector. However, the existing synchronization methods work only when the encoder is installed at a specific position and equivalent constant is precise. In order to solve this problem, a new synchronization method has been proposed and a way of applying the method to existing doubly-fed induction generator control algorithm has been also proposed. The validities of the methods proposed were verified by using a prototype converter for a 1.5MW-class doubly-fed induction generator and experimental results showed the validity of that against variation of an encoder positions, generator parameters, and grid voltages.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1586-1591
• /
• 2011

This paper considers synchronization problem of a complex dynamical network. For the problem, the virtual target node is chosen as one of nodes in the complex network and only one connection is needed between an isolate target node and virtual target node not any more connections. Moreover, our synchronization scheme does not need additional conditions and information of coupling matrix comparing with existing works. Based on Lyapunov stability theory, a design criterion for a novel adaptive feedback controller for the synchronization between the isolate target node and another nodes of the complex network is proposed. Finally, the proposed method is applied to a numerical example in order to show the effectiveness of our results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.506-515
• /
• 2015

In this paper, we propose a group playback synchronization method using adaptive synchronization delay time by the bit rate of media to synchronize a play position of streaming media between mobile smart devices. This method consists of streaming server-side and client-side synchronization algorithms based on synchronization delay time which includes connection time, control packet transmission time, streaming data buffering time, and synchronization processing time. We implement the Android media player application with synchronization support using the proposed algorithms and present the result of performance evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.16-23
• /
• 2018

Chaos is one of the most significant topics in nonlinear science, and has been intensively studied since the Lorenz system was introduced. One characteristic of a chaotic system is that the signals produced by it do not synchronize with any other system. It therefore seems impossible for two chaotic systems to synchronize with each other, but if the two systems exchange information in just the right way, they can synchronize. This paper addresses the problem of synchronization in a modified Lorenz chaotic system based on active control, sliding mode control, and the Lyapunov stability theory. The considered synchronization scheme consists of identical drive and response generalized systems coupled with linear state error variables. For this, a brief overview of the modified Lorenz chaotic system is given. Then, control rules are derived for chaos synchronization via active control and slide mode control theory, with a strategy for solving the chattering problem. The asymptotic stability of the overall feedback system is established using the Lyapunov stability theory. A set of computer simulation works is presented graphically to confirm the validity of the proposed method.

• Journal of Intelligence and Information Systems
• /
• v.11 no.3
• /
• pp.45-55
• /
• 2005

In this paper, we propose a method to a synchronization of chaotic UAVs(Unmanned Aerial Vehicle) that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. The proposed methods are assumed that if one of two chaotic UAVs receives the synchronization command, the other UAV also follows the same trajectory during the chaotic UAVs search on the arbitrary surface.